vano
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 661
Registered: 22-3-2019
Location: Georgia
Member Is Offline
|
|
What can i make from this compounds?
Hello! I want to make something interesting from these compounds, I don't want polymers. I will get any idea.
4,4'-Dichlorobiphenyl
Diphenyl sulfone
4,4'-Dichlorodiphenyl sulfone
4,4′-(Propane-2,2-diyl)diphenol
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4547
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Unfortunately, these aren't particularly versatile compounds. Diphenyl sulfone is not very interesting itself, but would be more useful if you could
reduce it to diphenyl sulfide. The only reference I could find for that uses samarium(II) iodide-HMPA conditions, which is expensive and difficult to
access. I know you have samarium metal, so it could actually be something to try, but there are easier and more practical ways to get to diphenyl
sulfide and/or thiophenol for the amateur, and also much more interesting things to do with SmI2.
The biphenyl is even less interesting. I could find barely anything that wasn't either polymer related or using cross-coupling reactions
(Buchwald-Hartwig, Negishi, etc) to make some obscure and probably not-too-interesting ligands. Only paper that looked remotely interesting is using a
cobalt-catalyzed carbonylation to convert it to the marginally more interesting dicarboxylic acid. I can't access the paper, and it's in Russian, but
here is the reference in case you want to try and find it:
Manufacture of aromatic acids and recycling of polychlorobiphenyl dioxin-like dielectrics by carbonylation of aryl halides
T. Zhesko
ISSN: 0028-2421
Neftekhimiya , 2007, Vol.47(4), p.296-300
|
|
vano
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 661
Registered: 22-3-2019
Location: Georgia
Member Is Offline
|
|
Thank you Texium so much!
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4298
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Chlorides don't work very well in Grignards, otherwise I'sd suggest making a carboxylic acid out of the dichlorobiphenyl.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
vano
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 661
Registered: 22-3-2019
Location: Georgia
Member Is Offline
|
|
Thank you DraconicAcid for your advice!
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4298
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Hmmm...
If you nitrate the dichlorodiphenyl, you should get one nitro group on each ring, ortho to the other phenyl group. Reduce that to a diamine, and that
would be an interesting chelating ligand.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
vano
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 661
Registered: 22-3-2019
Location: Georgia
Member Is Offline
|
|
interesnting idea. thanks!
|
|
Mateo_swe
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 526
Registered: 24-8-2019
Location: Within EU
Member Is Offline
|
|
Are you absolutely restricted to these compounds or just got them and wanted to use them or something like a school assignment project?
There are so many things you can do with other very easily available OTC chemicals if you just tell what types of things that interests you.
For example smell and taste chemistry, firework and energetics, make element samples, chemiluminescence (reactions that produce light in different
colors and intensity), electrochemical cells, pharmaceuticals etc, etc...
|
|
vano
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 661
Registered: 22-3-2019
Location: Georgia
Member Is Offline
|
|
thank you!. I received them as a gift. Here are just the compounds I can not use in anything.
[Edited on 10-6-2022 by vano]
|
|
clearly_not_atara
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2725
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
Bisphenol A? You can make frogs gay ![:D](./images/smilies/biggrin.gif)
Aryl chlorides are indeed very inert. Unsubstituted biphenyl, though, is an electron-transfer catalyst that can assist the production of metal
nanoparticles. Unfortunately, those chlorides get in the way. The dehalogenation might be effected with magnesium in methanol:
https://www.sciencedirect.com/science/article/pii/S004040391...
So I wouldn't say the biphenyl is totally uninteresting. Metal nanoparticles are themselves just a step in some other process, though, usually. The
usual preparation is:
anhydrous metal chloride in ether + sodium + biphenyl >> nanoparticles in ether + NaCl
|
|
vano
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 661
Registered: 22-3-2019
Location: Georgia
Member Is Offline
|
|
Interesting. thank you!
|
|
clearly_not_atara
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2725
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
I found this thread again because I had identified diphenyl sulfone (lit bp 374 C) as a possible high-temperature "oil bath" liquid, possibly
supporting reactions up to 350 C. Unfortunately, I have not found any good information about the autoignition temperature or general air-stability of
Ph2SO2 at this temperature though an MSDS from Merck gives the autoignition point of fluorenone as 608 C, which is promising.
|
|
dawt
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 74
Registered: 9-5-2016
Location: EU
Member Is Offline
Mood: fluorescent
|
|
Meh, I tried using dimethyl sulfone as a bath and it smoked a LOT well below it's bp.
|
|
andyloris
Harmless
Posts: 49
Registered: 22-9-2022
Location: France
Member Is Offline
Mood: Lazy
|
|
Did you mean diphenyl sulfone instead of dimethyl sulfone ?
Always trust your first idea, especially if you only have one.
|
|