Monoamine
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 165
Registered: 25-5-2021
Location: Sweden(ish)
Member Is Offline
Mood: +7
|
|
Stoichiometry for Al(Ga) amalgam reduction of nitroalkane
So I've never done a reduction with an amalgam yet because mercury salts scare the bedoodles out of me, but luckily I received some gallium, so was
going to give it a try.
I read everything I could find on how it works and how to do it, but no matter where I look I can't seem to find the actual reaction mechanism or even
information about stoichiometry.
So from what I gather, you need 3 moles on an alcohol (I will use methanol) per mole of aluminum. And you need about 0.1 moles of gallium to make the
Al(Ga) amalgam (which serves to make the aluminum's surface more reactive towards the methanol to form Al(OMe)3). Plus apparently you need
some extra water or methanol as a proton source.
But at this point I get a bit lost, because I couldn't find out anywhere how many mores of nitroalkane will be reduced to the amine by one mole of
Al(OMe)3). Also, how much extra water/methanol is actually needed to have sufficient protons. For instance does the H2 produced
when the Al(OMe)3) forms participate in the reduction as a source of protons? What happens to the oxygens on the nitro that is being
reduced?
A simple reaction equation (or if you even know where to find the actual mechanism) would help immensely, even if it's the mercury version (since I'd
guess the mechanism is still more or less the same).
(Cool stuff gallium anyway, btw, I played with some last night and rolled a piece of aluminum foil around it until it was literally gone! And then the
gallium (amalgam?) began to melt all over my gloves lol). Anyway, I'm looking forward to this.
|
|
Mateo_swe
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 526
Registered: 24-8-2019
Location: Within EU
Member Is Offline
|
|
The amalgam reduction of nitroalkanes must be one of the more popular reactions and it suprises me you cant find any reaction info online.
I think its done in several variants depending on what substrate to be reduced.
Attachment: Aluminum Amalgam.pdf (320kB) This file has been downloaded 283 times
|
|
Ephraim_Bane
Harmless
Posts: 4
Registered: 19-7-2019
Member Is Offline
|
|
That's aluminum/mercury amalgam, I'm assuming what this person wants information on is aluminum/gallium. I'm interested in that amalgam as well, but I
think Al/Ga would be different than Al/Hg.
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
Sure there is a stoichiometry, but the question is how relevant it is. Al(OMe)3 doesn't reduce, as the aluminium is already oxidized, otherwise there
would be no need for the amalgam to begin with. What you need to do is having the compound to be reduced available while the amalgam is in a state
where it can still reduce. I don't think there is a real difference between the mercury and gallium amalgams.
Have a look at sodium in ethanol reduction for example given oximes. The sodium is oxidized by the ethanol, but sodium ethoxide doesn't reduce
anything. There is a state in between where the ethanol makes the reduction of the oxime possible.
All an amalgam is is alloy of two metals, exposing one of the metals to the compound to be reduced. In the example of sodium in ethanol there is no
need for mercury or gallium as the surface is already exposed.
[Edited on 8-4-2022 by Tsjerk]
|
|