woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7998
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Some experiments with cyanate ion
The cyanate ion, OCN(-), is somewhat underrated on sciencemadness. The ion is only rarely mentioned and there hardly is experimental info on this ion.
So, I decided to do some experiments and collected some interesting results in a single web page:
https://woelen.homescience.net/science/chem/exps/cyanate/ind...
If others of you have interesting ideas for experiments with cyanate salts, then please mention them here. If they are interesting and I have the
suitable reagents, then I can extend this web page.
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4301
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Neat!
The blue cobalt complex- with chloride or thiocyanate, I know this can be extracted into solvents such as butanol. Can this be done with the cyanato
version?
The iron(III) reaction with cyanate- is this stable on standing? It looks like it's not so much a complex as the iron may be catalyzing the
hydrolysis of cyanate to ammonia and hydrogen carbonate (which would give the rusty colour).
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
AvBaeyer
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 647
Registered: 25-2-2014
Location: CA
Member Is Offline
Mood: No Mood
|
|
woelen,
A very nice presentation - love the colors. Sodium and potassium cyanates are used in organic chemistry. Under mildly acidic conditions cyanates will
react with primary and secondary amines to form substituted ureas.
Also, remember the very famous Wohler experiment: ammonium cyanate conversion to urea, a foundational event in modern chemistry.
Keep up the great work.
AvB
|
|
walruslover69
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 228
Registered: 21-12-2017
Member Is Offline
Mood: No Mood
|
|
Do you have any insights into if the complexes are pure cyanates, or mixed aqua cyanates?
It would be cool to see some of them isolated as solids.
|
|
karlos³
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1520
Registered: 10-1-2011
Location: yes!
Member Is Offline
Mood: oxazolidinic 8)
|
|
Quote: Originally posted by AvBaeyer ![](images/xpblue/lastpost.gif) | Sodium and potassium cyanates are used in organic chemistry. Under mildly acidic conditions cyanates will react with primary and secondary amines to
form substituted ureas. |
Hihihi thats funny because I also sit on such a thing.
Ultimately, its after oxazolidines/thiazolamines.
The paper I'm currently preparing to try is the attached one .
But starting from brominated phenethanolamine and 2-naphthylethanolamine, I think the thiazolamine in the former case is pretty interesting,
pharmacologically, if yes, then the latter for sure too.
Brominated at the alcohol, that is.
Yes its obvious what I'm after, I know ![:)](./images/smilies/smile.gif)
(I would be happy about a few grams of thiocyanate for xmas by the way )
But after all its experiments with cyanates too so I hope its ok for woelen.
[Edited on 23-10-2021 by karlos³]
Attachment: j.tetasy.2006.12.012.pdf (332kB) This file has been downloaded 271 times
verrückt und wissenschaftlich
|
|
Linus1208
Harmless
Posts: 43
Registered: 7-6-2021
Member Is Offline
|
|
Nice, I was just reading/thinking some interesting stuff about cyanates and similar, just what I needed
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1225
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
Very nice experiment! I also wanted to try this experiment, but I am lazy (at least for know) to make some cyanate . I every text book you find cyanate as example of ligand, you can find it in
spectrophotochemical series, but no one write about complexes with cyanate. Really no one. I couldn't even found scientific paper on this. I read
something about silver cyanate and Na, K cyanates, but that's all. So I am really glad that somone finally wrote something about it .
Very nice photos and videos btw .
You wrote that bonds between silver and nitrogen in silver cyanate aren't full bonds. What kind of bonds they are? Do you have some text about it? I
found paper about structure of AgNCO and it says that Ag-N bonds are covalent.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1704
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Cyanates are used in nitrocarburizing.
We're not banging rocks together here. We know how to put a man back together.
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1225
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
I think that slight yellow tinge of AgNCO is caused by presence of silver carbonate. Your cyanate certainly contains small amount of sodium carbonate.
This can be nicely seen in the reaction between sodium cyanate and acid. After mixing relatively large amount of CO2 was released at once.
Mo(V) forms beautifuly colored complexes with halides and pseudohalides. You can make Mo(V) solution by reducing molybdate in HCl by some strong
reducing agent like SnCl2, TiCl3, Na2S2O3 etc. Then add some NaOH until brown oxide starts to appear. Then redissolve it with small amount of acid and
add sodium cyanate. Molybdenum in other oxidation states also form complexes with halides and pseudohalides, but they have mostly brown colour (except
Mo(IV) complex in conc. HCl, which is red. I also made red fluoride complex, but I am not sure if this was Mo(V) or Mo(IV) complex).
I also read something about cyanide waste water procesing long time ago. Chlorine at pH 10 oxidize cyanide to cyanate (through ClCN intermediate). But
this reaction can continue and cyanate is oxidized to CO2 and N2. You can try heat it in bleach, nitrogen should be released.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7998
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Quote: | The blue cobalt complex- with chloride or thiocyanate, I know this can be extracted into solvents such as butanol. Can this be done with the cyanato
version? | The blue complex cannot be extracted into isoamyl alcohol (that is very similar to butanol, amyl
alcohol and other similar solvents). I prepared a fairly concentrated deep blue solution for this experiment, with only NaOCN and CoSO4 in solution. I
had 5 ml of this blue liquid. Next, I added 1.5 ml or so of isoamylalcohol and shook the liquid very vigorously for a minute or so. When put to rest
again, the liquids quickly separate again. The isoamyl alcohol layer, which is on top, is colorless after separation. I tried three times, with
different concentrations, and also after slight acidification, such that still no CO2 was produced. In all cases, the alcohol layer remained
colorless.
Quote: | I think that slight yellow tinge of AgNCO is caused by presence of silver carbonate. Your cyanate certainly contains small amount of sodium carbonate.
| This might be the case, but on quite some websites, this chemical is described as not being purely white,
see e.g. https://www.oxfordlabchem.com/product-details.php?id=2465&am... but of course this is no guarantee that theirs is free of carbonate.
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1225
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
Yes, you need just some moisture and cyanate hydrolyze in to carbonate and ammonia.
|
|
John paul III
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 110
Registered: 28-4-2018
Member Is Offline
Mood: No Mood
|
|
Try oxidizing it to nitrate. there's supposedly a lot of catalysts that can do that, quote:
"About 3 hours heating [at 400 deg.] of KCNO in a well dried stream of air oxidizes it to KNO3, the oxidation is accelerated through catalysts such as
metallic Cu, Ni, Ag, Au or their salts, as well as traces of moisture in the air stream, where KCNO is primarily split into easily oxidizable NH3 and
K2CO3 (Ber. 59 [1926] 210)."
[Edited on 9-1-2022 by John paul III]
[Edited on 9-1-2022 by John paul III]
|
|
Bezaleel
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 444
Registered: 28-2-2009
Member Is Offline
Mood: transitional
|
|
Hi Woelen, is the cyanate solution alkaline or more or less neutral? If so, I'd be interested to see the colour of the manganese compound.
BTW, the picture of the Co solution with AgNO3 is added is really beautiful.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7998
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I'll try and see what pH the cyanate solution has. I can also add a solution of some MnSO4 to it. I'll come back on this.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7998
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I did the following experiment:
- Dissolve approximately 150 mg of NaOCN in 4 ml of distilled water.
- Using pH-paper, measure pH: This is between 8 and 9, according to the indicator paper I used.
- Dissolve 3 mg of NaBH4 in the solution of NaOCN. This is done to assure that on formation of a precipitate of Mn(2+) the dissolved oxygen in the
solution does not cause formation of brown compounds. Mn(2+) is very prone to aerial oxidation at high pH.
- In a separate test tube, dissolve appr. 100 mg of MnSO4.H2O in 5 ml of distilled water. This gives a colorless solution (the color of aqueous Mn(2+)
is too weak to observe it in this solution).
- Mix both solutions: No precipitate is formed, the solution remains perfectly clear and colorless. So, OCN(-) does not give a precipitate with
Mn(2+). Probably a colorless complex is formed.
- Add a ml or so of 10% ammonia. A slimy off-white precipitate is formed, which on addition of more ammonia does not dissolve. This off-white
precipitate most likely is hydrous Mn(OH)2. At the surface of the liquid, this precipitate slowly turns brown, despite the added NaBH4.
|
|