ManyInterests
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 894
Registered: 19-5-2019
Member Is Offline
|
|
Proper disposal of hydrazine sulfate leftover liquid
I finally worked up the courage (and got all the necessary stuff for creation and neutralization) and made my first batch of hydrazine sulfate. The
only mishap I had when making it is that I added the sulfuric acid too fast at the end, thankfully I was using half the volume of Nile Red and the
rest, so the foam didn't spill. I'm not going to do that again though.
The only other issue is cooling. Hydrazine appears to really, really like to retain its heat. It took forever to cool down and I thought my batch was
a dud. Thankfully I got my crystals out when the temp was around 14 degrees Celsius so I hope I didn't get much sodium sulfate.
But there was an issue... I just want to know if I disposed of the leftover liquid/liqueur or whatever you want to call it. On the wiki they said
hydrazine can be disposed of with a dilute calcium hypochlorite solution. I also saw a video where someone uses the same bleach they used to make the
thing to neutralize the hydrazine.
I decided to do both. I made a murky, almost saturated solution of calcium hypochlorite. Though when I dumped the stuff in there I had no idea it
would fizz as it did. It even needed a few spoonfuls of the stuff for the fizzing to stop. It also fizzed further when I poured the bleach (pool
chlorinator at 10.8%). It worked. I also learned a lesson to never do this in my bathroom. Thankfully from you guys here I learned how to clean out
the air. It should be completely clear of everything by morning...
After doing all that to the left over hydrazine, I diluted it further with water and flushed it down the toilet. Did I do this correctly? Or did I
miss a step? Making hydrazine sulfate is by far the most time consuming thing I've ever done. I might do it once more, but after that I should have
enough hydrazine sulfate for all my needs.
|
|
MidLifeChemist
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 192
Registered: 4-7-2019
Location: West Coast USA
Member Is Offline
Mood: precipitatory
|
|
>>but after that I should have enough hydrazine sulfate for all my needs.
What are those needs?
|
|
j_sum1
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 6269
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
I would do this outside. In a bucket. Using standard household bleach.
I made some years ago (only a small batch of a few grams) and never got round to using it. I won't trust it and will make some more at some stage. I
intend to dospose of my current batch in this manner.
Bottom line is that a reducing agent like that is not going to survive a strong oxidiser like hypochlorite. The reaction might not be pretty and so
caution is required. But once neutralised it should be safe.
|
|
ManyInterests
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 894
Registered: 19-5-2019
Member Is Offline
|
|
I want to make some nickel hydrazine nitrate. It's the safest primary explosive out there and the only one I have any willingness to work with.
Quote: | I would do this outside. In a bucket. Using standard household bleach. |
Normal household bleach works to neutralize it? Why is that not mentioned in the wiki? It only mentions calcium hypochlorite. If that is the case, it
will make things much easier. But I already have the calcium hypochlorite anyway. So might as well use it.
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
Calcium and sodium hypochlorite will work identically.
It would probably have been more save to dump the whole thing down the toilet to begin with when not working in a fumehood. The bacteria down the line
won't mind a bit of hydrazine, or a lot of it over time. But the fizzing will have spread quite a bit of hydrazine in the area where you were.
Toxic compounds should be disposed of in a correct manner, but the hydrazine isn't toxic to the regular sewer system, whereas it is toxic when inhaled
in a bathroom.
[Edited on 8-11-2021 by Tsjerk]
|
|
ManyInterests
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 894
Registered: 19-5-2019
Member Is Offline
|
|
More information I could been told earlier. But that's OK. I sprayed hypochlorite all over my bathroom and everywhere else it could have gone. It
wasn't that bad. My apartment smelt like a swimming pool for a bit. I probably won't make hydrazine again, but since you informed me of that I am
better equipped.
Right now my biggest problem is still NO2. My current run of nitric acid creation for some reason made more than normal. While my step-ups stopped any
from getting into my living space previously, for some reason this time some seeped in. I had to degassify everything again.
[Edited on 9-11-2021 by ManyInterests]
|
|