Monoamine
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 165
Registered: 25-5-2021
Location: Sweden(ish)
Member Is Offline
Mood: +7
|
|
Zn-Hg amalgam safety
I've been looking into reducing a ketone to an alkane. Scouring the literature, the classical way to do this seems to be via the so called Clemmensen
reduction (see reference). The reaction depends upon a zinc-mercury amalgam, which sounds slightly scary, since I really don't want to fuck with
anything containing mercury. Mercury (and especially their salts scare the crap out of me tbh...).
On top of that I also don't know how to to properly dispose of it. For organic solvents I just bring them to the local waste collection site for
disposal so hopefully they also take mercury waste...
The main question I have is basically on how to use this reagent safely and to remove all Hg contaminants from the final product.
Has anyone used this reagent before and knows what the correct safety precautions are that have to be taken when using this compound ?
Thanks.
References:
THE CLEMMENSEN REDUCTION
Martin, E. L. React. 1942, 1, 155
|
|
Monoamine
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 165
Registered: 25-5-2021
Location: Sweden(ish)
Member Is Offline
Mood: +7
|
|
Answer:
According to this product safety sheet
(Zn-Hg amalgam safety)
It actually seem to be fairly safe to handle without and isn't considered hazardous.
|
|
SWIM
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 970
Registered: 3-9-2017
Member Is Offline
|
|
WTF?
Zinc mercury amalgam is 50% zinc and 50% water?????
What about the mercury?
It's been a while, but I'm pretty sure I'd make that stuff up by either treating Zinc with mercuric chloride solution, or by agitating mossy zinc in a
mixture of mercury and concentrated HCL.(Just a little HCl)
Geez, am I missing something when I read that MSDS?
I feel like I'm taking crazy pills.
Well, actually I am sorta doing that, so feel free to set me straight.
Disclaimer:
I do have a prescription.
[Edited on 12-7-2021 by SWIM]
|
|
Oxy
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 140
Registered: 1-12-2020
Member Is Offline
|
|
It must be a mistake, there should be a mercury.
Maybe they want to sell a greener alternative for amalgam... Who knows.
Regarding the toxicity, it is toxic as hell and it's better to avoid any contact and breathing.
|
|
Texium
|
Threads Merged 12-7-2021 at 05:23 |
Jenks
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 161
Registered: 1-12-2019
Member Is Offline
|
|
Isn't zinc-mercury amalgam what was used for dental fillings? Probably not very toxic in bulk form then, when not stored in one's mouth, at least
until the zinc is dissolved out.
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4298
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Quote: Originally posted by Jenks ![](images/xpblue/lastpost.gif) | Isn't zinc-mercury amalgam what was used for dental fillings? Probably not very toxic in bulk form then, when not stored in one's mouth, at least
until the zinc is dissolved out. |
No, that was silver-mercury amalgam.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
Mateo_swe
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 526
Registered: 24-8-2019
Location: Within EU
Member Is Offline
|
|
Hmm, when doing Al-Hg the Mercury(II)chloride is removing the oxide layer of the Al making it very reactive.
Can it be something similar but they removed all traces of Hg in some way after it removed the oxide layer of the Zn?
If not, i dont understand that MSDS, very strange.
|
|
Oxy
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 140
Registered: 1-12-2020
Member Is Offline
|
|
Mercury amalgam is an alloy, it does much more than removing oxide layer. Once amalgamated the metal and mercury forms metallic bonds.
Once mercury is removed it shouldn't be named as Zinc-Mercury amalgam as there is no mercury there.
|
|
Mateo_swe
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 526
Registered: 24-8-2019
Location: Within EU
Member Is Offline
|
|
I know the mercury is still present in the Al-Hg but i thought the main working reaction was to remove the Al oxide layer making the Al very reactive.
Good to know there are more going on in that reaction, i look up the details of how it works.
That MSDS (link in monoamine´s post above) must be plain wrong and maybe very dangerous if there is Hg present.
And if there isnt any Hg present it should be removed as it is in that case incorrect or at least change the name to "Zinc metal in water".
|
|
Monoamine
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 165
Registered: 25-5-2021
Location: Sweden(ish)
Member Is Offline
Mood: +7
|
|
Oh jeez... Well, good thing I haven't dragged any on shore yet.
Does make me wonder about that safety sheet. But this goes to show that just because something's written on a nice sheet of paper doesn't make it
true.
Thank you for the warnings!
Reading this sheet again though it looks like what they call zinc mercury amalgam doesn't actually contain any mercury. It seems to only contain zinc
and water. Maybe they called it this to scare noobs like me off playing with it.
Kinds: Don't listen to rap-mercury amalgam, it'll damage your nerves!
[Edited on 26-8-2021 by Monoamine]
|
|
TheMrbunGee
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 364
Registered: 13-7-2016
Location: EU
Member Is Offline
Mood: Phosphorising
|
|
Low-copper amalgam commonly consists of mercury (50%), silver (~22–32%), tin (~14%), zinc (~8%) and other trace metals.
|
|
macckone
Dispenser of practical lab wisdom
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
You can substitute gallium for mercury in a lot of amalgam type reactions.
Or you can ditch the mercury entirely if you use it with HCl.
If your reactants and products are not acid sensitive then you can use HCl and skip the mercury.
If you are reducing nitrates, you can use devarda's alloy.
Without more information on the exact reaction it is hard to suggest an alternative reagent.
There are a LOT of reducing agents that don't contain mercury.
LiAlH4, LiH, Sodium Metal in liquid ammonia, DiBAl, BAlH, NaBH4, etc
Obviously some are hard to get but others not so much.
|
|