Panache
International Hazard
Posts: 1290
Registered: 18-10-2007
Member Is Offline
Mood: Instead of being my deliverance, she had a resemblance to a Kat named Frankenstein
|
|
Alternatives to paraffin
Hello all,
Has anyone used any alternatives to paraffin for storing sodium metal under?
if so what and how?
i'm going to try argon overnight unless someone has a fantastic alternative..
|
|
|
Sulaiman
International Hazard
Posts: 3723
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Online
|
|
Gasoline?
(not tried personally - obvious hazard but if nothing else...)
I guess argon is safer 
[Edited on 1-6-2021 by Sulaiman]
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
teodor
National Hazard
Posts: 924
Registered: 28-6-2019
Location: Netherlands
Member Is Offline
|
|
Xylene, ether.
|
|
|
Texium
Administrator
Posts: 4619
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
I wouldn’t recommend ether (too volatile).
|
|
|
teodor
National Hazard
Posts: 924
Registered: 28-6-2019
Location: Netherlands
Member Is Offline
|
|
I keep it in a freezer at -18C. Also there are other ethers with higher boiling point.
Probably Xylene should be better for long-term storage but low-grade xylene requires some purification before putting sodium inside.
[Edited on 1-6-2021 by teodor]
|
|
|
Praxichys
International Hazard
Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline
Mood: Coprecipitated
|
|
Considering most gas these days is at least 10% ethanol, there would likely be violence involved with
mixing these two.
Mineral oil is the best choice and is found in many forms. It is sold at most drugstores as a laxative and can be found in large quantities online for
the same use but for veterinary purposes on large animals. On Amazon it's about 20 bucks for a gallon.
Odorless mineral spirits would be a good second choice, as would kerosene, heating oil, lamp oil, and many high-boiling naphthas intended for parts
cleaning like ShellSol D60-D100, Exxsol D series, Safety-Kleen solvent, etc.
As a last resort, nondetergent 30-weight motor oil would work, or camping fuel if you don't mind the volatility. Sometimes you can find vacuum pump
oil at auto shops which would also work.
|
|
|
Fyndium
International Hazard
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
Paraffin oil is available everywhere cheap, so is there a specific reason not to use it? For human use, it usually costs multitudes more than what it
is sold for wood treatment, etc.
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
WARNING!
Be ABSOLUTELY SURE your freezer is spark-free before storing flammable chemicals (especially ether) in it! Otherwise explosions can result.
|
|
|
Texium
Administrator
Posts: 4619
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Well, yes, but typically saying "ether" without
qualifiers implies the diethyl variety.
|
|
|
Mateo_swe
National Hazard
Posts: 548
Registered: 24-8-2019
Location: Within EU
Member Is Offline
|
|
The unperfumed baby oil for sensitive babys is pure mineral oil and found evrywhere.
|
|
|
Panache
International Hazard
Posts: 1290
Registered: 18-10-2007
Member Is Offline
Mood: Instead of being my deliverance, she had a resemblance to a Kat named Frankenstein
|
|
Quote: Originally posted by Fyndium  | | Paraffin oil is available everywhere cheap, so is there a specific reason not to use it? For human use, it usually costs multitudes more than what it
is sold for wood treatment, etc. |
Just convenience at the time, we were in hard lockdown, nothing was open and it was 11pm.
The argon has worked a treat so much so it remains shiny several days afterwards. I used a polypropylene tuperware type container with oring snap
seals, ran argon into it for about twenty seconds, placed the sodium lump in that i had just cut, it consumed the large part of the containers
capacity, snapped the lid on.
i kept expecting it to turn that characteristic bottom of a public trash can galvanised mottled grey but it stays shiny!! argon works better than
paraffin
|
|
|
Texium
Administrator
Posts: 4619
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Due to diffusion of the gas, you’ll still likely have to flush it with argon every so often. Paraffin that has been degassed by bubbling argon
through would probably be a better bet for long term storage.
|
|
|
FrenchChemist
Harmless
Posts: 43
Registered: 25-1-2021
Member Is Offline
|
|
turpentine works for me
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
