Flip
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 116
Registered: 7-12-2005
Member Is Offline
Mood: No Mood
|
|
Building Aromacity
I recently became interested in cyclization reactions...
But what i'd like to know is if there are cyclization reactions that can actually build an aromatic ring from completely aliphatic precursors
(unsubstituted or substituted)
Does anyone know of any?
|
|
Ramiel
Vicious like a ferret
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 484
Registered: 19-8-2002
Location: Room at the Back, Australia
Member Is Offline
Mood: Semi-demented
|
|
I'm guessing that as long as you form a cyclic molecule with the 'right' number of pi electrons (I'm thinking Hucke's rule: 4n + 2) in the same plane,
the aromatic hybrid is thermodynamically favoured and will therefore exist.
Just like when you have -C=C-C=C-C=C... and so on you'll get conjugation I guess, even if you start from scratch and build up the chain, conjugation
will occur because it is favoured thermodynamically.
It's a bit of a vitalism/urea type argument really; the 'natural' benzene would be no different to synthetic cyclohex-1,3,5-ene.
Caveat Orator
|
|
BromicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3237
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
One of the reactions for forming benzene involves passing acetylene over some catalyst (or maybe not) at decent temperatures. Benzene becomes one of
the important products because it's more stable then other products formed so it's favored in that manner though this isn't specifically a reaction
that could form this ring under other conditions.
|
|
stoichiometric_steve
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 827
Registered: 14-12-2005
Member Is Offline
Mood: satyric
|
|
you can make 1,3,5-trimethylbenzene by heating acetone with a strong acid.
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
The oxime of glutaraldehyde forma pyridine on heating in acid. Furfural is produced by cooking bran with acid. There are heaps of such syntheses.
|
|
Vitus_Verdegast
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 297
Registered: 5-12-2004
Location: Ottoman Empire
Member Is Offline
Mood: tea time
|
|
citral
Citral can be easily cyclisized into alpha,p-dimethylstyrene
(heating w acid IIRC, this cyclisation also occurs naturally)
|
|
Nicodem
Super Moderator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
Judging from some other Flip's posts I would dare to guess that the info on the kind aromatizations he is looking for is of the type of propylhexedrine to 1-phenylpropan-2-methylamine or similar of the field.
Flip, there was already some discussion on this on some deceased forum. You might do some arHiveology to dig up the old remains of the relevant
threads. I remember it was one of the WizardX's favorite ideas so try searching for his posts.
…there is a human touch of the cultist “believer” in every theorist that he must struggle against as being
unworthy of the scientist. Some of the greatest men of science have publicly repudiated a theory which earlier they hotly defended. In this lies their
scientific temper, not in the scientific defense of the theory. - Weston La Barre (Ghost Dance, 1972)
Read the The ScienceMadness Guidelines!
|
|
leu
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 368
Registered: 13-10-2005
Member Is Offline
Mood: No Mood
|
|
Aromatics from Alkynes
One of Reppe's many innovations in acetylene chemistry was the development of a catalyst, dicarbonyldi(triphenylphosphino)
nickel [(CO)2Ni(Ph3P)2] in the presence of which the trimerization of acetylenes to benzenes can be carried out smoothly and efficiently at
temperatures of 60-70°. Thus acetylene gives benzene in high yield (80 per cent) while monosubstituted acetylenes furnish either 1 : 3 : 5- or 1 : 2
: 4-trisubstituted benzenes or mixtures of the two isomers, the exact reaction course depending on the nature of the initial acetylene. Use of the
catalyst also enables the copolymerization of acetylene with a substituted ethylene in a 2 : 1 or 1 : 2 ratio with the production of
cyclohexa-1:3-dienes and cyclohexenes respectively, Another novel Reppe process, hitherto little developed, entails the reaction of acetylene with
iron carbonyl hydride, Fe(CO)4H2, in aqueous media, whereby hydroquinone is formed. This reaction has also been applied to mono- and di-substituted
acetylenes, the former compounds yielding the 2 : 5-disubstituted hydroquinones; acetylenic hydrocarbons, ethers and amines have been successfully
subjected to the procedure.
Seven papers have been uploaded to the Organic Chemistry forum of Wet Dreams, three on the actual syntheses, and four on the catalysts ![:cool:](./images/smilies/cool.gif)
[Edited on 4-7-2006 by leu]
Chemistry is our Covalent Bond
|
|
guy
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 982
Registered: 14-4-2004
Location: California, USA
Member Is Offline
Mood: Catalytic!
|
|
Quote: | Originally posted by leu
One of Reppe's many innovations in acetylene chemistry was the development of a catalyst, dicarbonyldi(triphenylphosphino)
nickel [(CO)2Ni(Ph3P)2] in the presence of which the trimerization of acetylenes to benzenes can be carried out smoothly and efficiently at
temperatures of 60-70°. Thus acetylene gives benzene in high yield (80 per cent) while monosubstituted acetylenes furnish either 1 : 3 : 5- or 1 : 2
: 4-trisubstituted benzenes or mixtures of the two isomers, the exact reaction course depending on the nature of the initial acetylene. Use of the
catalyst also enables the copolymerization of acetylene with a substituted ethylene in a 2 : 1 or 1 : 2 ratio with the production of
cyclohexa-1:3-dienes and cyclohexenes respectively, Another novel Reppe process, hitherto little developed, entails the reaction of acetylene with
iron carbonyl hydride, Fe(CO)4H2, in aqueous media, whereby hydroquinone is formed. This reaction has also been applied to mono- and di-substituted
acetylenes, the former compounds yielding the 2 : 5-disubstituted hydroquinones; acetylenic hydrocarbons, ethers and amines have been successfully
subjected to the procedure.
Seven papers have been uploaded to the Organic Chemistry forum of Wet Dreams, three on the actual syntheses, and four on the catalysts ![:cool:](./images/smilies/cool.gif)
[Edited on 4-7-2006 by leu] |
What is this Wet Dreams forum?
Im interested in reading those papers.
|
|
Ozone
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1269
Registered: 28-7-2005
Location: Good Olde USA
Member Is Offline
Mood: Integrated
|
|
"Building Aromaticity"
Sounds like a great title for a two-book 1600pp each set.
Here's some interesting literature, if anyone is interested I also have many papers regarding metal-metal aromaticity and Moebius aromaticity.
I suppose it is all a matter of how far you want to go,
O3
Attachment: Wiberg 2001.pdf (173kB) This file has been downloaded 915 times
-Anyone who never made a mistake never tried anything new.
--Albert Einstein
|
|
Flip
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 116
Registered: 7-12-2005
Member Is Offline
Mood: No Mood
|
|
Quote: | Judging from some other Flip's posts I would dare to guess that the info on the kind aromatizations he is looking for is of the type of
propylhexedrine to 1-phenylpropan-2-methylamine or similar of the field. |
In my own defense, only about half of the crazy reaction schemes that I come up with are actually feasible, none of them are practical or of any use
to the amateur, and the best of them could inspire the black hats around here to pick up a white coat, as I did long ago. No offense to the
following of WX and the like, but I have no interest in that which has already been done. Even as a simple drone I never ventured into that
particular forum, and I feel I must have made some error that I could ever be categorized so narrowly. Hell, if anything throw an MD bridge on
there.![:P](./images/smilies/tongue.gif)
This reply is more than a bit late but i've been busy balancing internships with finishing my degree in Chem.
|
|