Draeger
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 185
Registered: 31-1-2020
Location: North-Rhine Westfalia, Germany
Member Is Offline
Mood: Slowly getting ready for new projects
|
|
Quickly drying mineral oil or storing sodium without mineral oil?
So, I've bought myself some sodium, and along with it, some mineral oil. Then I wanted to store the sodium in the mineral oil, but it turns out, it
wasn't anhydrous. Luckily, I didn't pour in much yet, so, except my sodium maybe being ruined, it seems the reaction is under control.
I'm not sure how to save my sodium though, since I'm not sure how I can dry my mineral oil. I don't have calcium chloride, nor any calcium compound I
could turn into calcium chloride. What do I do? Is there maybe a way to temporarily store my sodium without mineral oil?
I know I should've expected something like that, but I didn't expect that for some reason. Next time, I'll know.
Collected elements:
Al, Cu, Ga, C (coal), S, Zn, Na
Collected compounds:
Inorganic:
NaOH; NaHCO3; MnCl2; MnCO3; CuSO4; FeSO4; aq. 30-33% HCl; aq. NaClO; aq. 9,5% ammonia; aq. 94-96% H2SO4; aq. 3% H2O2
Organic:
citric acid, sodium acetate, sodium citrate, petroleum, mineral oil
|
|
RustyShackleford
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 198
Registered: 10-12-2020
Location: Northern Europe
Member Is Offline
|
|
you could store in a flask flushed w butane/propane, if you dont have any other inert gas.
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3633
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
you could use a small sacrificial amount of sodium to dry the oil
then add your nice sample
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
Deathunter88
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 514
Registered: 20-2-2015
Location: Beijing, China
Member Is Offline
Mood: No Mood
|
|
Are you sure your mineral oil is that wet? I find it hard to believe a significant amount of water could stay dissolved in mineral oil.
|
|
draculic acid69
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1371
Registered: 2-8-2018
Member Is Offline
|
|
Or use a solvent like toluene or xylene
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
The oil I buy always contains a little water, not enough to react with a lot of sodium, but enough to bubble.
Just heat the oil to about 125-150 degrees until it stops bubbling. It will take about 15-45 minutes depending on the temperature.
Unlike when stored under propane/toluene you don't need a very airtight container when using oil. The oil itself will form a seal in the threads or
between the fitted glass.
I have a sodium sample with only a very tiny air bubble in a screw cap bottle, it is 15 years old but the metal is still almost shiny, just a bit
de-colored, but no oxide crust.
[Edited on 27-3-2021 by Tsjerk]
|
|
Draeger
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 185
Registered: 31-1-2020
Location: North-Rhine Westfalia, Germany
Member Is Offline
Mood: Slowly getting ready for new projects
|
|
Quote: Originally posted by Tsjerk ![](images/xpblue/lastpost.gif) | The oil I buy always contains a little water, not enough to react with a lot of sodium, but enough to bubble.
Just heat the oil to about 125-150 degrees until it stops bubbling. It will take about 15-45 minutes depending on the temperature.
Unlike when stored under propane/toluene you don't need a very airtight container when using oil. The oil itself will form a seal in the threads or
between the fitted glass.
I have a sodium sample with only a very tiny air bubble in a screw cap bottle, it is 15 years old but the metal is still almost shiny, just a bit
de-colored, but no oxide crust.
[Edited on 27-3-2021 by Tsjerk] |
How much does your's bubble? When I put it upright in just a small puddle of oil, it quickly sucked the whole metal full of it, and when I felt the
surface of it with gloves (there was no way they could be wet, I was sure of that), the sodium was quite hot and nowhere near stopping to bubble,
despite immediately taking it out of the oil.
Collected elements:
Al, Cu, Ga, C (coal), S, Zn, Na
Collected compounds:
Inorganic:
NaOH; NaHCO3; MnCl2; MnCO3; CuSO4; FeSO4; aq. 30-33% HCl; aq. NaClO; aq. 9,5% ammonia; aq. 94-96% H2SO4; aq. 3% H2O2
Organic:
citric acid, sodium acetate, sodium citrate, petroleum, mineral oil
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Draeger ![](images/xpblue/lastpost.gif) | When I put it upright in just a small puddle of oil, it quickly sucked the whole metal full of it, and when I felt the surface of it with gloves
(there was no way they could be wet, I was sure of that), the sodium was quite hot and nowhere near stopping to bubble, despite immediately taking it
out of the oil. |
I don't think you have oil there. You have something else.
You can not dissolve that much water in oil.
|
|
Draeger
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 185
Registered: 31-1-2020
Location: North-Rhine Westfalia, Germany
Member Is Offline
Mood: Slowly getting ready for new projects
|
|
Quote: Originally posted by unionised ![](images/xpblue/lastpost.gif) | Quote: Originally posted by Draeger ![](images/xpblue/lastpost.gif) | When I put it upright in just a small puddle of oil, it quickly sucked the whole metal full of it, and when I felt the surface of it with gloves
(there was no way they could be wet, I was sure of that), the sodium was quite hot and nowhere near stopping to bubble, despite immediately taking it
out of the oil. |
I don't think you have oil there. You have something else.
You can not dissolve that much water in oil. |
Great. Guess S3 chemicals scammed me then.
Collected elements:
Al, Cu, Ga, C (coal), S, Zn, Na
Collected compounds:
Inorganic:
NaOH; NaHCO3; MnCl2; MnCO3; CuSO4; FeSO4; aq. 30-33% HCl; aq. NaClO; aq. 9,5% ammonia; aq. 94-96% H2SO4; aq. 3% H2O2
Organic:
citric acid, sodium acetate, sodium citrate, petroleum, mineral oil
|
|
Fyndium
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
You order oil from special chemical supplier?
Mineral oil, or paraffin oil is sold in every supermarket either as a baby oil in skin treatment aisle, or oil for treating cutting boards, wood
surfaces and other stuff in kitchen aisle, and also in paint aisle for some purposes. I never had any water in my oil, and I've gotten them literally
everywhere. My latest oil that I use to grease all my glass joints, stirrer bearings and also for my vacuum pump is actually from IKEA.
|
|
S.C. Wack
bibliomaster
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
OTC mineral oils tend to have additives.
|
|
Draeger
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 185
Registered: 31-1-2020
Location: North-Rhine Westfalia, Germany
Member Is Offline
Mood: Slowly getting ready for new projects
|
|
Yeah, seems that in my area, mineral oil is a rarity, and impossible to get without additives. Even from my online suppliers, S3 was the only one that
sold mineral oil at an affordable price.
Collected elements:
Al, Cu, Ga, C (coal), S, Zn, Na
Collected compounds:
Inorganic:
NaOH; NaHCO3; MnCl2; MnCO3; CuSO4; FeSO4; aq. 30-33% HCl; aq. NaClO; aq. 9,5% ammonia; aq. 94-96% H2SO4; aq. 3% H2O2
Organic:
citric acid, sodium acetate, sodium citrate, petroleum, mineral oil
|
|
Fyndium
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
Strange. The ones that are not for baby treatment, are practically straight paraffin oils without any other stuff. So far I haven't noticed anything
else, anyway.
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4547
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
That would be an odd scam to run considering there are few things
less expensive than mineral oil...
|
|
S.C. Wack
bibliomaster
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
Quote: Originally posted by Fyndium ![](images/xpblue/lastpost.gif) | The ones that are not for baby treatment, are practically straight paraffin oils without any other stuff. |
Like this?
|
|
S.C. Wack
bibliomaster
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
...
|
|
Fyndium
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
The stuff that's supposed to be administered on or in humans, usually contains trace amounts of stuff like that E-vitamin. The wood treatment oil is
usually just paraffin.
I'm usually not too concerned about some small impurities, because they either do not react or affects yield much less than what it would cost to
purify the stuff. If you need pure stuff for example when doing stuff that's very sensitive to catalytic impurities, it's another case, and actual ACS
grade stuff might be easiest.
|
|
S.C. Wack
bibliomaster
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
PS add kerosene to the list, but not the "lamp oil" that turns out to boil at 80C.
|
|
zed
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2281
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Ummm. Nurdrage found his Sodium production method, required Hypoallergenic Baby oil.
Aromatics are sometimes a problem, and scents would definitely be a problem.
|
|
valeg96
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 254
Registered: 6-4-2014
Location: Italy
Member Is Offline
Mood: Moodless
|
|
I recently had to clean and store approx. 300 g of sodium for a school. I used high bp petroleum ether for lithium (40-80°C) and rectified petroleum
(180-230°C) for sodium, both laboratory reagents. Thankfully I didn't use some opened hexane I was provided with, because there was an inch of water
on the bottom of the bottle. I would have blown myself up, had I poured it all in the sodium jar. I have found that even the water that gets absorbed
during storage is enough to make the metal fizz; so drying them beforehand with CaCl2 is definitely recommended unless they are brand new.
|
|