Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Electrodeposition of alkaline metals from propylene carbonate solutions of salts
stamasd
Hazard to Others
***




Posts: 137
Registered: 24-5-2018
Location: in the crosshairs
Member Is Offline

Mood: moody

[*] posted on 14-2-2021 at 11:33
Electrodeposition of alkaline metals from propylene carbonate solutions of salts


I just came across this article https://escholarship.org/uc/item/8m6348vh
(I'll attach it as pdf as well)

In it, the authors prepared lithium, sodium, potassium, rubidium and cesium by electrolysis of various of their salts at normal room temperature from propylene carbonate solutions. The only caveats were that the PC had to be very dry, and it was done under atmosphere of argon (duh).

I'm very tempted to attempt it myself.



Attachment: electrodeposition of alkaline metals from propylene carbonate.pdf (1.4MB)
This file has been downloaded 478 times




All your acids are belong to us.
View user's profile View All Posts By User
stamasd
Hazard to Others
***




Posts: 137
Registered: 24-5-2018
Location: in the crosshairs
Member Is Offline

Mood: moody

[*] posted on 14-2-2021 at 16:07


Additionally, I found this: https://pubs.acs.org/doi/abs/10.1021/ie049948i
Maybe I'll try to use this method to make propylene carbonate from urea and propylene glycol.




All your acids are belong to us.
View user's profile View All Posts By User
clearly_not_atara
International Hazard
*****




Posts: 2800
Registered: 3-11-2013
Member Is Offline

Mood: Big

[*] posted on 14-2-2021 at 17:35


This method has been discussed and seems promising. PrC is used for the electrolyte in lithium batteries, which effectively proves that lithium (at least) can be deposited from PrC solutions.



Quote: Originally posted by bnull  
you can always buy new equipment but can't buy new fingers.
View user's profile View All Posts By User
JuliusCaesium
Harmless
*




Posts: 3
Registered: 22-1-2018
Location: top of the mountain, PNW
Member Is Offline

Mood: vibin'

[*] posted on 27-7-2021 at 11:19


Has anyone actually had success with this method? I am trying to find a way to electroplate with alkali metals and having difficulty with the procedure, so I'd love any tips or words of wisdom.
View user's profile View All Posts By User
Triflic Acid
Hazard to Others
***




Posts: 486
Registered: 27-9-2020
Member Is Offline

Mood: Slowly Oxidizing into Oblivion

[*] posted on 28-7-2021 at 05:30


Also, for those looking for PC, some types of non-acetone nail polish removers have PC and EtOH mixed in. Distillation should separate them. Will try some time in the next weeks



There wasn't a fire, we just had an uncontrolled rapid oxidation event at the power plant.
View user's profile View All Posts By User

  Go To Top