Fyndium
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
What have been your longest or most boring reactions?
As the question stands, how is it? Some reactions take more time to prepare and measure than to actually carry out, while some needs to be ran over so
many hours you begin to think is it really even worth it. And what do you do in the meantime so that safety does not suffer?
We'll say that reactions which do not need even occasional attending do not count, so if you've been melting ice, filtering calcium sulfate solutions
or watching paint to dry, no points given.
[Edited on 4-1-2021 by Fyndium]
|
|
karlosĀ³
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1520
Registered: 10-1-2011
Location: yes!
Member Is Offline
Mood: oxazolidinic 8)
|
|
Substitution of 1,2-diphenylethyl tosylate with dimethylamine... was it a week or nine days, I would have to check?
But booooring.... although it worked pretty well.
Although I guess it falls under your definition of not needing occasional attending.
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4299
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Not done at home, but the 2nd year phys chem experiment of bomb calorimetry. You press a button, then nothing happens apart from the water bath going
up a few degrees......
ETA: Also, the 4th-year determination of the triple point of argon. Could only barely see it, and after having seen benzene solidify during vacuum
removal of solvent, there wasn't anything fascinating in it.
[Edited on 4-1-2021 by DraconicAcid]
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
As a student I prepared bis toluene chromium.
An absurd procedure that sublimed chromium at about 1200C and froze toluene in the same (largely evacuated) container.
This essentially mean that my lab-partner and I walked back and to pouring liquid nitrogen into a bath round a 1200 watt furnace for about 5 hours.
(seemed longer)
Yield wasn't great either.
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2690
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I had a reaction to put a benzyl group on hindered amine that took about 5 days, so I ran it once as I left for a vacation, and just let it stir for a
week. I have always liked having multiple reaction sequesnces running, so rather than try to push a reaction to go faster, I could just let it stir
and move to another project for a while, as time will make nearly any reaction go to completion, even without an excess of one reagent to drive it, as
long as you give the molecules time to find their mate.
|
|
aromaticfanatic
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 173
Registered: 10-9-2019
Member Is Offline
|
|
Mine is nowhere near as bad as others but the nitration of toluene was notably my most boring and drawn out reaction. I never leave reactions alone
(if I can help it, sometimes I need to go grab something of course) and it was already late and cold outside. I was up from 8PM to 4AM running the
reaction and cleaning up. Hated it and never want to do it again. I designed my next synthesis to specifically not include nitrotoluenes just because
I hate them so much from just this one incident. It doesn't sound like it was a long time but when you are outside dressed up with the PPE looking all
goofy, with nothing to do, it's cold, a load of acid being added drop by drop seemingly not even dropping in volume, and already being super late in
the night (I made sure I wasn't tired and inattentive of course), things get pretty boring and seemingly take forever.
|
|
Shiva_Inorganic
Harmless
Posts: 12
Registered: 15-3-2018
Member Is Offline
Mood: No Mood
|
|
The reaction between Magnesium metal and a fairly strong Boric acid solution. Mg dissolves very slowly even in boiling Boric acid solution. It may
take hours to dissolve in it completely. Sometimes the reaction dies down. You will fall asleep before that anyway :p
Shiva Chemist
|
|