TriiodideFrog
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 108
Registered: 27-9-2020
Member Is Offline
|
|
How to remove brown stains off beaker
|
|
TriiodideFrog
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 108
Registered: 27-9-2020
Member Is Offline
|
|
There seem to be some brown stains on the bottom of my beaker. Does anyone know how to remove it? Thanks in advance.
|
|
EthidiumBromide
Harmless
Posts: 42
Registered: 27-9-2020
Member Is Offline
Mood: Effervescent
|
|
If there was a concrete chemical causing these stains, then it would be easier to tell if there was a chemical method of removing the stains (for
instance, stains from KMnO4/MnO2 easily come off with a mix of vinegar and 3% H2O2).
But being generic, see if you can brush them off with an old toothbrush or something like that.
[Edited on 15-11-2020 by EthidiumBromide]
|
|
B(a)P
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
What caused the stains?
|
|
MidLifeChemist
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 192
Registered: 4-7-2019
Location: West Coast USA
Member Is Offline
Mood: precipitatory
|
|
Soaking overnight in dilute hydrochloric acid has cleaned every stain on glassware I've had so far. But my stains are usually from metal salts. Iron
(III) compound stains are often brown.
Unless I know the stain is from Iodine, then I use a Sodium thiosulfate solution. Iodine stains are often brown.
Of course, if it an organic material, Acetone may do the trick.
Good luck!
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4298
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
If it's organic, but acetone does not do the trick, a small amount of boiling nitric acid will rip it off like a bandaid. Just make sure you've got a
fume hood.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
TriiodideFrog
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 108
Registered: 27-9-2020
Member Is Offline
|
|
Thanks for the advice! The dumb brown stain came off. I think its a mixture of lithium salts and something organic.
|
|
aromaticfanatic
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 173
Registered: 10-9-2019
Member Is Offline
|
|
In case anyone else has issues, letting a hot NaOH solution sit in the glass will do the trick. It eats away a thin layer of the glass essentially
creating a new surface.
|
|
teodor
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 874
Registered: 28-6-2019
Location: Heerenveen
Member Is Offline
|
|
Actually very diluted mixture of H2SO4 and H2O2 (few mls of each per liter of water) is potent enough to remove not only MnO2 but PbO2, Fe(OH)3 and
many other (transitional) metal oxides. Put there and check in a day.
[Edited on 27-11-2020 by teodor]
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1225
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
Teodor: I had issues remove iron even with conc. HCl. Oxalic acid is the best for removing iron oxides.
|
|