Fluorite
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 133
Registered: 26-12-2018
Location: United Arab Emirates
Member Is Offline
|
|
what can you do without lab glassware
Hypothetically speaking let's say laboratory glassware are so prohibited and illegal to obtain (like in Tunisia) what can you do to distill liquids or
separate solvents? Any Ideas? Barium can be very useful it can be used to make most acids by adding sulfuric acid and barium sulfate isn't a gel like
(CaSO4)
And it can be regenerated by adding sodium carbonate to make barium carbonate! Strontium works too
What about making aluminum distiller? Aluminum doesn't react with phosphoric nor nitric acid
|
|
outer_limits
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 139
Registered: 3-3-2020
Member Is Offline
Mood: hybridized
|
|
You can make a "ghetto setup" and for example make a condenser from bottle having a tube running through it. After filling with water, ideally running
through it should be usable.
|
|
Fyndium
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
Depending on your resources, everything from soda bottles to self glass-blown stuff to pressure kettles to TIG welded SS DIY process equipment.
|
|
MadHatter
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1333
Registered: 9-7-2004
Location: Maine
Member Is Offline
Mood: Enjoying retirement
|
|
DIY condenser
Have access to glass tubing and rubber
stoppers ? My 1st condenser was a large
glass tube with 2-hole rubber stoppers on
each end. 1 smaller glass tube ran
between 2 of the holes on the stoppers.
The remaining hole on the stoppers used
bent glass tubing as water inlets and
outlets. Worked very well at the time.
From opening of NCIS New Orleans - It goes a BOOM ! BOOM ! BOOM ! MUHAHAHAHAHAHAHA !
|
|
danton
Harmless
Posts: 6
Registered: 13-11-2019
Member Is Offline
|
|
Quote: Originally posted by MadHatter ![](images/xpblue/lastpost.gif) | Have access to glass tubing and rubber
stoppers ? My 1st condenser was a large
glass tube with 2-hole rubber stoppers on
each end. 1 smaller glass tube ran
between 2 of the holes on the stoppers.
The remaining hole on the stoppers used
bent glass tubing as water inlets and
outlets. Worked very well at the time. |
I made one just like that too. It worked fine and lasted until I had saved enough to buy some glassware.
|
|