Science_Yak
Harmless
Posts: 6
Registered: 23-8-2019
Member Is Offline
Mood: Energetic
|
|
NaK Catalyzed Magnesium Reduction Method
Would you be able to use KOH, MgO Na Aggregate, Mineral Oil, T-butanol, using the Alcohol Catalyzed Magnesium Reduction Method, to create potassium
metal, that reacts with the sodium metal to create Nak, and then use some sort of mechanical separation to remove the MgO from The Mix! Or Am I stupid
in my ideas and going to get roasted!
|
|
ArbuzToWoda
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 98
Registered: 15-7-2020
Member Is Offline
|
|
Quote: Originally posted by Science_Yak ![](images/xpblue/lastpost.gif) | Would you be able to use KOH, MgO Na Aggregate, Mineral Oil, T-butanol, using the Alcohol Catalyzed Magnesium Reduction Method, to create potassium
metal, that reacts with the sodium metal to create Nak, and then use some sort of mechanical separation to remove the MgO from The Mix! Or Am I stupid
in my ideas and going to get roasted! |
If that is what you mean, potassium metal has been obtained using a similar approach to the NurdRage's sodium one on German forums. Then you could
combine the potassium and sodium aggregate in 1,4-dioxane so as to remove the magnesium, while the alloy melts. That would probably work, yeah.
|
|
Science_Yak
Harmless
Posts: 6
Registered: 23-8-2019
Member Is Offline
Mood: Energetic
|
|
I know, but would you be able to use the crude aggregate to make the NaK in one step, using the nurd rage process. Follow his procedure but just add
MgONa Aggregate in the reaction, and hope that the Na reacts with the K and drips out of the aggregate. has this been tested?
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3027
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
Sodium and potassium don't really react, the just mix. I guess you don't even have to run the sodium and potassium reactions separately, you could
just mix NaOH and KOH and make NaK as a one-pot reaction.
Better even use sodium metal or your sodium MgO aggregate to dry the KOH, so you don't have water in the reaction which will damage your glass.
Whether filtering MgO out of the NaK works I don't know.
|
|
Science_Yak
Harmless
Posts: 6
Registered: 23-8-2019
Member Is Offline
Mood: Energetic
|
|
Would I need to stir this reaction if I did the NaOH KOH mix, as you need to stir for Na production, but not K production
|
|
zed
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2281
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Hnuh? Is this because you don't have a stir plate?
If so, get one or make one.
|
|