Pages:
1
2 |
outer_limits
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 139
Registered: 3-3-2020
Member Is Offline
Mood: hybridized
|
|
I know one person who did this at least two times a week few years ago. After 2 or three months he developed lead poisoning but didn't stopped until
he was placed in a hospital in very serious condition.
It was performed without any PPE using propane burner. No fumes extractor, just the wind from time to time.
|
|
Fyndium
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
They had a discussion about this on a reloaders forum:
http://castboolits.gunloads.com/showthread.php?121103-Lead-F...
They investigated that if lead is heated too much (over 500C), it will start to release significant amount of fumes. Lead dust has also been confirmed
as a cause for elevated lead blood.
I'd be curious to measure my lead blood after I handled some lead acetate multiple weeks ago. I did everything by the safety standards, so I don't
expect there to be any noticeable increase.
|
|
B(a)P
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
I have my blood analysed every 6 months (work requirement) for a range of heavy metals, other contaminants and health indicators.
Despite doing a lot of work on lead contaminated sites over the years and regularly working with lead at home in my lab, I have never returned a
detectable concentration of lead or any other contaminant. If you know the element/compound/reaction you are working with, are careful, and use PPE
appropriately, you are quite safe.
|
|
Pages:
1
2 |