aromaticfanatic
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 173
Registered: 10-9-2019
Member Is Offline
|
|
Knock out hazards 2.0
I had asked this question a day ago or so but was told to just research what I'm doing. I do that already, however someone mentioned that I was making
a valid point and it moved me to repost here. Here is what I said from the best of my memory:
What are some knock out hazards in the lab? There are obvious ones like chloroform (not like the movies though), ether, anything that can displace
oxygen, and the like. However, I have also discovered some not so well known knock out hazards.
An obvious class of knock out agents are vasolidators. They cause a drop in blood pressure which leads to becoming unconscious. Isopropyl nitrite
fumes have an immediate vasolidation effect. Nitroglycerine is a well known vasolidator. ETN is one as well but since its vapor pressure is much lower
than nitroglycerine, there isn't much risk besides a headache after handling the plastic bare handed for a long time.
So you can already see a difference between the generic vasolidators. Some are much more potent than others and I don't think there is a scale that
helps you figure out how strong of vasolidators they are. In a serious accident where, say, a lot of hot isopropyl nitrite is knocked out of the fume
hood for some reason. The lab space is small and suddenly you have a large fire hazard. As you are cleaning things up you become very light headed and
warm and soon you pass out. You are found dead in your lab the next day. It may sound exaggerated but it's a real possibility for some of us. Or the
perfect experiment for something like this to happen could be during sodium azide synthesis. Hydrazine fumes, temps need monitoring, sodium azide is
well known to be lethal, and the isopropyl nitrite (I have smelled the fumes while making the nitrite and it does cause an almost instant warm feeling
but hasn't knocked me out before, but someone with an already low blood pressure or someone who stands up right after smelling it, may pass out) is a
possibility to render you unconscious.
Some lesser known knock out agents are cyanide and azides. The sodium salts are both highly water soluble and have similar LD50s. I believe they both
act to stop oxygen from being absorbed or transported in the blood stream. Sodium cyanide has a knock out effect and in a Reddit Q&A, CodysLab
actually has mentioned passing out from cyanide even though he had the antidote and took it. Some was kicked up in the air and since it was a fine
dust he inhaled quite a bit on accident. He administered sodium thiosulfate and mentioned he still passed out. This makes sense as the cyanide he
inhaled quickly acted to stop hemoglobin from picking up any oxygen. No oxygen = brain ceases to function properly = unconscious.
Sodium azide's knock out effect is said to be much more potent than cyanide. It has very unpleasant effects at around 20mg and potential to knock you
out in slightly larger doses.
These are scary things. While you would likely survive the less lethal knock out doses, you are in a lab around highly dangerous chemicals. When you
are knocked out, you can't fight a fire, you can't wash chemicals from your eyes, you can't flee the lab from anything. This is obviously extremely
dangerous.
The person who mentioned that my original post was a good idea to keep up and not delete also found out Xenon is an anesthetic and a definite knock
out hazard (not just from displacing the air).
So there are obvious ones, and then there are not so obvious ones and even after a good amount of research, many people may miss that. I knew cyanide
pretty well but I never realized the knock out potential it may have in less lethal amounts despite a good amount of research on the insidious
chemical.
There are varying scales of severity as well.
So, having said that, are there any other knock out chemicals that are lesser known but may be found in amateur chemists' labs?
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3634
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
A list would be too long to remember easily.
Better to research your starting chemicals and expected products and by-products on a case-by-case basis for each experiment.
You can simultaneously research handling, storing and disposal.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
B(a)P
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
Quote: Originally posted by Sulaiman ![](images/xpblue/lastpost.gif) | A list would be too long to remember easily.
Better to research your starting chemicals and expected products and by-products on a case-by-case basis for each experiment.
You can simultaneously research handling, storing and disposal. |
I still think it is interesting to explore. Many aspects of chemistry are too long to remember, getting a consolidated list of this sort of thing is
therefore useful I think.
Arsenic trioxide is one such chemical.
|
|
teodor
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 874
Registered: 28-6-2019
Location: Heerenveen
Member Is Offline
|
|
What is the knock-out effect of As2O3? Could you describe some case to make us better understand the danger?
|
|
B(a)P
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1139
Registered: 29-9-2019
Member Is Offline
Mood: Festive
|
|
Quote: Originally posted by teodor ![](images/xpblue/lastpost.gif) |
What is the knock-out effect of As2O3? Could you describe some case to make us better understand the danger? |
Exposure to As2O3 is via inhalation of dust or dermal contact.
As2O3 causes tachycardia, reducing blood pressure and potentially leading to a loss of consciousness.
|
|
teodor
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 874
Registered: 28-6-2019
Location: Heerenveen
Member Is Offline
|
|
Most descriptions which says "inhalation of dust" I believe are referring to some factory conditions where the dust is everywhere and the whole day. I
always puzzled how this rule could be applied to a case like opening a bottle and get few spatulas of the chemical or collecting scattered powder, so
the condition we usually have in lab.
|
|
Fyndium
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
What are the go-to antidotes for cyanide poisoning and are they available otc?
|
|
njl
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 609
Registered: 26-11-2019
Location: under the sycamore tree
Member Is Offline
Mood: ambivalent
|
|
An organic nitrite, vitamin b, and sodium thiosulfate if I recall correctly. All of which are OTC.
|
|
itsallgoodjames
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 276
Registered: 31-8-2020
Location: America Lite
Member Is Offline
|
|
According to Wikipedia:
The United States standard cyanide antidote kit first uses a small inhaled dose of amyl nitrite, followed by intravenous sodium nitrite, followed by
intravenous sodium thiosulfate
|
|
aromaticfanatic
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 173
Registered: 10-9-2019
Member Is Offline
|
|
Quote: Originally posted by Sulaiman ![](images/xpblue/lastpost.gif) | A list would be too long to remember easily.
Better to research your starting chemicals and expected products and by-products on a case-by-case basis for each experiment.
You can simultaneously research handling, storing and disposal. |
You don't need to memorize a list, you can write it down and scan the list for the chemical you are researching as a pre check. Many don't know about
cyanide's or azide's knock out potential, they just know at around 200mg both will kill a grown man. But, the extremely rapid action of them as well
as the knock out effect at lower doses are often overlooked in chemistry, especially the azides.
|
|
paulll
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 102
Registered: 1-5-2018
Member Is Offline
Mood: It's fine. Really.
|
|
This would be on my mind if I was doing anything that might release Hydrogen Sulfide.
|
|
Deathunter88
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 514
Registered: 20-2-2015
Location: Beijing, China
Member Is Offline
Mood: No Mood
|
|
I think for most of the "knock out" hazards you mention you're really referring to "you're dead" hazards. There are very few compounds we work with
which knock you out fast without causing significant permanent damage so I don't really thing the list would be too useful.
|
|
OldNubbins
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 136
Registered: 2-2-2017
Location: CA
Member Is Offline
Mood: Comfortably Numb
|
|
A list might be an interesting novelty but in no way, shape, or form should be referred to as a matter of safety. If a substance has the capability
to 'knock out' a person with little or no warning, brain damage has probably already occurred and will likely continue as the victim lies unconscious.
To me, that seems like more poor preparations and faulty procedures used rather than the substance's inherit dangers. Lists can lead to insufficient
information and complacency. Maybe it's a good starting point if your goal is to knock yourself or someone else out, but a better overall
understanding of the process and all chemicals involved is more responsible.
'Knock out' potential just seems oddly specific, since there are so many other ways chemicals can incapacitate or kill you.
|
|
teodor
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 874
Registered: 28-6-2019
Location: Heerenveen
Member Is Offline
|
|
I personally think such a list is very important.
If you will try to use ANY published value of danger, you never can discover that you should be more careful, let say, with HCN than with HBr, because
the HCN has IDLH 50 ppm and HBr has 30 ppm.
[Edited on 14-10-2020 by teodor]
|
|
Fyndium
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
I thought very long ago how one could make an ex tempore setup for working with extremely toxic stuff. The idea was to make a tent, which is on
negative pressure, and lead a tube with air pump into full body suit, including face, to generate overpressure so any leaks will go outwards.
Just as a thought, but if I'd had the space and need/want to work with something that I consider too dangerous, it doesn't sound too impossible to do.
|
|
zed
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2281
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
https://www.sciencemadness.org/whisper/viewthread.php?tid=15...
Fyndium. Positive pressure protection, is something I know a fair amount about.
I just posted on the matter, a few minutes ago. You have the link.
[Edited on 18-10-2020 by zed]
[Edited on 18-10-2020 by zed]
|
|