Opylation
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 131
Registered: 30-8-2019
Member Is Offline
|
|
CS2 preparation via 1,3,5-trithiane and S2Cl2 per translated German paper
Hello all. I’ve decided to do some research on carbon disulfide preparations and there have been some very reports and videos of preparing this
using sulfur and activated carbon. This process however uses very high temperatures and produces very little for the amount of time spent on setup and
synthesis. The ease of preparing 1,3,5-trithiane seems like a decent alternative as one can use formaldehyde, hydrogen sulfide - made from FeS or any
alternative route, and hydrogen chloride. Trithiane can then be reacted with sulfur chloride according to this paper which I have spent the better
part of a day translating and editing to format decently. As I do not speak German I have resulted to using google translate and meticulously proof
read the copies text for scanned errors. That being said, there may be a few errors that slipped through the cracks however I tried to read it a
reword sentences to the best of my ability. Well anyways, take a look.
Attachment: bloch1922.pdf (298kB) This file has been downloaded 306 times
Attachment: About symmetrical dichlorodimethyl sulfide (dichloromethyl sulfide).pdf (76kB) This file has been downloaded 261 times
[Edited on 22-7-2020 by Opylation]
|
|
Opylation
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 131
Registered: 30-8-2019
Member Is Offline
|
|
I don’t know if anybody noticed, but the bis(chloromethyl) sulfide co-product can be reacted with water to form bis(hydroxymethyl) sulfide, which
itself breaks down into formaldehyde, thioformaldehyde, and water. Thioformaldehyde instantly cyclizes back into 1,3,5-trithiane! Also, there is a
preparation of mustard gas that uses ethylene and SCl2 instead of the original S2Cl2 synthesis. I would assume that S2Cl2 could be replaced with SCl2
like as in the mustard gas preparation which would remove sulfur from being a co-product as well. It may be a slow and tedious process but it seems
like the products are recyclable and it’s low temp. Could be a nice way to produce CS2 without needing 1100C+ temps
[Edited on 23-7-2020 by Opylation]
[Edited on 23-7-2020 by Opylation]
|
|
DavidJR
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 908
Registered: 1-1-2018
Location: Scotland
Member Is Offline
Mood: Tired
|
|
Hmm, be careful! I bet bis(choromethyl)thioether is nasty shit.
|
|
Opylation
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 131
Registered: 30-8-2019
Member Is Offline
|
|
Yeah, definitely! I was worried about it at first but the difference in b.p. compared to CS2 is about 100C. The paper states reacting the sulfide with
water produces bis(hydoxymethyl) sulfide which can be isolated and reverted back to 1,3,5-trithiane. If methyl mustard is left in the reaction flask
and then neutralized after CS2 production I would say the risk is minimal
|
|