Junk_Enginerd
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 250
Registered: 26-5-2019
Location: Sweden
Member Is Offline
|
|
Super simple sulfuric acid from bisulfate->pyrosulfate->hydrolysis?
I've read some discussions here about trying convert sodium bisulfate to sulfuric acid and from what I gather it's regarded as difficult and
discussion usually seems to end up with SO3.
But in the wiki I see that sodium bisulfate is quite easily pyrolyzed to sodium pyrosulfate, which according to the wiki hydrolyzes to sulfuric acid.
This seems excessively simple.
Just make pyrosulfate and add it to water. Presumably heat would drive the reaction to completion, and also drive off excess water for concentrated
sulfuric acid.
Though I just realized I forgot the sodium. What does the sodium end up forming? Is it an inseparable contaminant or easily dealt with?
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7998
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Adding sodium pyrosulfate to water simply leads to formation of sodium bisulfate:
Na2S2O7 + H2O --> 2 NaHSO4
The reaction is slightly more complicated, because the Na2S2O7 dissolves:
Na2S2O7 --> 2 Na(+) + S2O7(2-)
S2O7(2-) in turns reacts with water: S2O7(2-) + H2O --> 2 HSO4(-)
------------------------------------------------------------------------------------
This method hence is not suitable for making H2SO4. If you really want to make H2SO4, then you need to heat NaHSO4 to well over 1000 C. At 300 C or so
you get Na2S2O7 and you drive off water from the NaHSO4 (the reverse of the reaction, I give at the start of my post). This reaction can be done with
moderate equipment. In order to get sulfuric acid, you need to drive off SO3 from the Na2S2O7 and that requires heating to 1000 C or 1100 C. That is
very hot and is not easily done. Besides that, handling the super hot and super corrosive SO3 vapor is another issue.
|
|
Junk_Enginerd
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 250
Registered: 26-5-2019
Location: Sweden
Member Is Offline
|
|
Quote: Originally posted by woelen ![](images/xpblue/lastpost.gif) | Adding sodium pyrosulfate to water simply leads to formation of sodium bisulfate:
Na2S2O7 + H2O --> 2 NaHSO4
The reaction is slightly more complicated, because the Na2S2O7 dissolves:
Na2S2O7 --> 2 Na(+) + S2O7(2-)
S2O7(2-) in turns reacts with water: S2O7(2-) + H2O --> 2 HSO4(-)
------------------------------------------------------------------------------------
This method hence is not suitable for making H2SO4. If you really want to make H2SO4, then you need to heat NaHSO4 to well over 1000 C. At 300 C or so
you get Na2S2O7 and you drive off water from the NaHSO4 (the reverse of the reaction, I give at the start of my post). This reaction can be done with
moderate equipment. In order to get sulfuric acid, you need to drive off SO3 from the Na2S2O7 and that requires heating to 1000 C or 1100 C. That is
very hot and is not easily done. Besides that, handling the super hot and super corrosive SO3 vapor is another issue. |
This makes sense, but the wiki on sodium pyrosulfate does not agree. Is the wiki wrong then?
The wiki also states that SO3 is liberated starting at 400°C. Is this also wrong, or do you say 1000-1100°C because it is required to get a decent
rate in the reaction?
Heat I have no problems generating... Amongst my other hobbies is glassworking, metal casting and pottery. Should it ever be needed, I should be able
to get a solid 1300°c any time. But what on earth would be the reactor vessel for something like that? Steel would be eaten alive, no?
|
|
plastics
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 141
Registered: 6-11-2009
Member Is Offline
Mood: No Mood
|
|
941 Celsius - reaction complete
|
|
draculic acid69
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1371
Registered: 2-8-2018
Member Is Offline
|
|
Quote: Originally posted by Junk_Enginerd ![](images/xpblue/lastpost.gif) | I've read some discussions here about trying convert sodium bisulfate to sulfuric acid and from what I gather it's regarded as difficult and
discussion usually seems to end up with SO3.
But in the wiki I see that sodium bisulfate is quite easily pyrolyzed to sodium pyrosulfate, which according to the wiki hydrolyzes to sulfuric acid.
This seems excessively simple.
Just make pyrosulfate and add it to water. Presumably heat would drive the reaction to completion, and also drive off excess water for concentrated
sulfuric acid.
Though I just realized I forgot the sodium. What does the sodium end up forming? Is it an inseparable contaminant or easily dealt with?
|
Any sodium present would obviously just reattach to any sulfuric acid formed.woelen is right
|
|
draculic acid69
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1371
Registered: 2-8-2018
Member Is Offline
|
|
What exactly are we looking at? Tube furnace? Reaction?
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7998
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Wikipedia is notalways right when it comes to specific properties of chemicals. I have corrected quite a few pages (e.g. wrong colors mentioned in the
text, wrong properties about being hygroscopic or not, and several other things). Websites are parroting each other. One website says something wrong
and after a while many other websites say the same wrong thing :-(
|
|
Junk_Enginerd
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 250
Registered: 26-5-2019
Location: Sweden
Member Is Offline
|
|
Is the reactor borosilicate or something exotic like fused silica?
Makes sense. So perhaps saying it hydrolyzes to sulfuric acid is correct then, but it leaves out the fact that it also immediately forms bisulfate
after...
Quote: Originally posted by woelen ![](images/xpblue/lastpost.gif) | Wikipedia is notalways right when it comes to specific properties of chemicals. I have corrected quite a few pages (e.g. wrong colors mentioned in the
text, wrong properties about being hygroscopic or not, and several other things). Websites are parroting each other. One website says something wrong
and after a while many other websites say the same wrong thing :-( |
Of course, but I didn't mean wikipedia, I meant the sciencemadness wiki. I'd correct it myself, but I'm not confident enough that I'm correct...
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3027
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
The sciencemadness wiki is wrong even more often, because it is checked by way fewer people.
I don't see a reason to assume the hydrolyzation of pyrosulfate goes via H2SO4.
[Edited on 10-7-2020 by Tsjerk]
|
|