Refinery
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 371
Registered: 17-2-2014
Member Is Offline
Mood: Still
|
|
Effect of impure reagents on reactions?
This is a huge generalization, but what is the effect on using impure reagents for synthesis?
Obvious are side effects, and through that, yield losses, especially if reagents are not compensated for losses, but also side reactions could occur
that could even hinder the main reaction. A dangerous side effect could be if some side product react with one of the reagents violently. The
impurities could also cause cumulative losses in yields?
Probably one of the major fields where impure reagents are used is in clandestine chemistry, where isolation and purification steps are often skipped
due to savings in time and equipment, and looking at the results, the reactions can still be carried through for the most part. Industry does also a
lot of optimizing between purity and efficiency, finding some sort of compromise. Compositions of fuel and even bulk steel can have quite a large
tolerances.
I have also seen a compromise where multi-step synthesis is carried out so that the leading steps involving cheap feedstock are done with maximum
efficiency, usually using the resulting batch directly for second step, and only the end product resulting from these steps is processed with effort
to yield the maximum purity.
Some reactions produce a lot of impurities and at least isolating the wanted component is essential by the most efficient method suitable, which can
be as simple as filtering and drying, but possibly the result can be pure enough to be used as is. I've seen many legitimate sources cite that a
resulting reagent not needing further purification for use.
Some reactions are carried out in sole purpose of obtaining the wanted substance, for example simply for wanting to have it on your shelf, and in this
instance the time and yield losses are secondary next to obtaining the purest form possible.
So, how important it is to get highly pure reagent for synthesis use?
|
|
mackolol
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 459
Registered: 26-10-2017
Member Is Offline
Mood: Funky
|
|
I can tell you a nice example. Of course it's more of a curiosity. I'll copy this from wikipedia:
"In 1976, a 23-year-old graduate student in chemistry named Barry Kidston was searching for a way to make a legal recreational drug. Having read the
paper by Ziering and Lee, he deduced that he could make a drug with pethidine's effects without its legal restrictions, since desmethylprodine is a
different molecule and had never been addressed by law. Kidston successfully synthesized and used desmethylprodine for several months, after which he
suddenly came down with the symptoms of Parkinson's disease and was hospitalized. Physicians were perplexed, since Parkinson's disease would be a
great rarity in someone so young, but L-dopa, the standard drug for Parkinson's, relieved his symptoms. L-dopa is a precursor for dopamine, the
neurotransmitter whose lack produces Parkinson's symptoms. It was later found that his development of Parkinson's was due to a common impurity in the
synthesis of MPPP called MPTP (1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine), a neurotoxin that specifically targets dopamine producing neurons."
https://en.wikipedia.org/wiki/Desmethylprodine
|
|
morganbw
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 561
Registered: 23-11-2014
Member Is Offline
Mood: No Mood
|
|
@mackolol
gave you a very good example.
If you are going to ingest, please research what bad cooties could come from your synth.
|
|
Refinery
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 371
Registered: 17-2-2014
Member Is Offline
Mood: Still
|
|
That's a good point. Substances meant for ingestion should be paid extra caution, although this does not seem to be of priority in recreational use. I
personally do not ingest anything, except food I make in kitchen.
My priority was more on reaction yields and stability.
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3633
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Almost every reaction that an amateur chemist is likely to perform has been done before, many times, and documented.
If there are any special requirements for purity, or removal of specific common impurities, it will be documented.
Purification / work up by filtering, distillation, crystalisation, solvent extraction ...
is a common requirement as co/by-products are produced in most chemical reactions,
checking purity of results by b.p. or m.p. is common.
If you create your own experiment(s) then it is often very difficult to analyze your results/products,
as evidenced by the many questions similar to "WTF did I just make ?"
It would be nice to have access to 99.99999% pure reactants,
but for me, half of the fun is in the unexpected
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
karlos³
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1520
Registered: 10-1-2011
Location: yes!
Member Is Offline
Mood: oxazolidinic 8)
|
|
Hey wait, what makes you think that clandestine chemists use less pure reagents? ![:o](./images/smilies/shocked.gif)
First, clandestine chemists are well connected among each other, I would even bet most of them are able to access some things you would be envious
about.
Second, the things they have to make themselves... reagent purification is something everyone can and should do, and they really put effort into this.
Otherwise you throw willingly product away, with the resulting less product also being less pure initially and requiring more work for purification.
Thats a stupid calculation not to purify the precursor, and then instead using twice as long to purify half as much product? ![:o](./images/smilies/shocked.gif)
I don't know what people you have in mind, but they do not belong to us.
Maybe you talk about cooks or something like that, or the people who run mafia scale operations, whatever.
But those are not chemists and I refuse to have me and my friends put into the same category as such people.
And also, if someone is able to run a reaction sequence without intermediate purifications, AND all that without resulting in like two third lesser
yield, than this has not much to do with the purity of his precursors(and if, then they must be pretty pure), if someone is able to do this, with
shortcuts and all and ultimately ending up with a yield as good as the normal length way to do this....
Then this is someone who mastered the art of organic chemistry.
I can guarantee you that 8-9 of 10 people wouldn't be able to make use of well thought out shortcuts without causing more problems than its worth.
Someone who can do this, knows his reactions very well and knows what he is doing in great detail.
[Edited on 24-6-2020 by karlos³]
|
|
dawt
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 74
Registered: 9-5-2016
Location: EU
Member Is Offline
Mood: fluorescent
|
|
In some cases impurities also improve the reaction:
Quote: |
At first, we attempted the decarboxylation according to the peroxide method using cyclohexanol as the solvent. However, it was difficult to establish
a general method because both the reaction time and amount of catalyst required varied to complete the decarboxylation even under the same scale
reaction. For instance, when 4-hydroxy-L-proline was treated with peroxide catalyst (tert-butyl peroxide or tetralin hydroperoxide) in cyclohexanol
under reflux, the peroxide consumed ranged between 3% and 10% and decarboxylation took between 7 h and 28 h to complete. This variation was found to
greatly depend on the quality of the cyclohexanol used. Strangely, the decarboxylation rate gradually decreased in proportion to increase in the
purity of the cyclohexanol. For example, in the case of 99.3% purity cyclohexanol, it took 28 h reaction time and the addition of 10% peroxide.
However, with 98.1% purity cyclohexanol, the reaction was completed in 7 h by the addition of only 3% peroxide. These results suggest that there was
some effective substance contained in the cyclohexanol. The most effective way to determine this substance was by the use of its UV spectrum.
cyclohexanol of 99% purity has no peak between 200 to 320 nm, but 98% purity cyclohexanol showed a strong peak at 225 nm. Only 2-cyclohexen-1-one has
a peak at 225 nm within some impurities contained in cyclohexanol. Quantitative analysis by gas chromatography showed that it makes up less than 0.1%
in 99% purity cyclohexanol but more than 0.3% in 98% purity cyclohexanol.
|
https://erowid.org/archive/rhodium/chemistry/trp.decarbox.en...
|
|
outer_limits
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 139
Registered: 3-3-2020
Member Is Offline
Mood: hybridized
|
|
There are chemists and "chemists". The latter are people without the knowledge, skills and experience especially when it comes to extraction and
purification.
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
Quote: Originally posted by morganbw ![](images/xpblue/lastpost.gif) | @mackolol
gave you a very good example.
If you are going to ingest, please research what bad cooties could come from your synth. |
He ran the reaction too hot which caused the dehydration of a tertiary alcohol intermediate.
|
|
Refinery
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 371
Registered: 17-2-2014
Member Is Offline
Mood: Still
|
|
This was said more out of respect for being able to pull off complex processes from impure junk.
|
|