Draeger
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 185
Registered: 31-1-2020
Location: North-Rhine Westfalia, Germany
Member Is Offline
Mood: Slowly getting ready for new projects
|
|
Removing HCl from CuCl2 solution
So, I made some copper(II) chloride today. Problem is excess HCl and only things I can think of to neutralize it is sodium hydroxide and sodium
bicarbonate, and I imagine that sodium bicarbonate would be the best choice, but I don't know.
[Edited on 12-6-2020 by Draeger]
Collected elements:
Al, Cu, Ga, C (coal), S, Zn, Na
Collected compounds:
Inorganic:
NaOH; NaHCO3; MnCl2; MnCO3; CuSO4; FeSO4; aq. 30-33% HCl; aq. NaClO; aq. 9,5% ammonia; aq. 94-96% H2SO4; aq. 3% H2O2
Organic:
citric acid, sodium acetate, sodium citrate, petroleum, mineral oil
|
|
Lion850
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 517
Registered: 7-10-2019
Location: Australia
Member Is Offline
Mood: Great
|
|
Can you boil out the excess HCl?
|
|
Draeger
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 185
Registered: 31-1-2020
Location: North-Rhine Westfalia, Germany
Member Is Offline
Mood: Slowly getting ready for new projects
|
|
I forgot to mention: I have little to no ventilation, so that would be pretty risky.
Collected elements:
Al, Cu, Ga, C (coal), S, Zn, Na
Collected compounds:
Inorganic:
NaOH; NaHCO3; MnCl2; MnCO3; CuSO4; FeSO4; aq. 30-33% HCl; aq. NaClO; aq. 9,5% ammonia; aq. 94-96% H2SO4; aq. 3% H2O2
Organic:
citric acid, sodium acetate, sodium citrate, petroleum, mineral oil
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Dry it in a desiccator over NaOH (or even NaHCO3, if that's all you have).
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1225
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
If you have only slightly excess of HCl, just let it slowly evaporate. It should be fine.
[Edited on 11-6-2020 by Bedlasky]
|
|
Draeger
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 185
Registered: 31-1-2020
Location: North-Rhine Westfalia, Germany
Member Is Offline
Mood: Slowly getting ready for new projects
|
|
The solution no longer smells stinging, so maybe I could heat it up a little. I could maybe attach a ph test strip above the beaker so that I am
warned if dangerous amounts of HCl are being evolved.
Collected elements:
Al, Cu, Ga, C (coal), S, Zn, Na
Collected compounds:
Inorganic:
NaOH; NaHCO3; MnCl2; MnCO3; CuSO4; FeSO4; aq. 30-33% HCl; aq. NaClO; aq. 9,5% ammonia; aq. 94-96% H2SO4; aq. 3% H2O2
Organic:
citric acid, sodium acetate, sodium citrate, petroleum, mineral oil
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3027
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
I think the pH test strip will turn red soon, even with small amounts of HCl. I think you can trust your nose in this one, once you start to smell the
HCl it is time to stop, by that time most likely nothing dangerous evaporated yet.
Be aware of HCl's astonishing power to corrode (stainless) steel though! It will leave a dull grey to dirty brown staining on anything made with iron
in it, and will do so quickly.
|
|
Syn the Sizer
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 591
Registered: 12-11-2019
Location: Canada
Member Is Offline
|
|
I agree with Tsjerk, I had pH paper sitting on the counter nest to my bottle of HCl which I stupidly left open for an hour or so and my whole book of
pH paper turned acidic. Your nose is your best piece of equipment.
If you have the equipment you could use a ground joint flask with a gas takeoff and bubble the fumes through a NaOH bath, of course having a trap to
catch any suck back.
I would avoid neutralizing with anything, I made some CuCl2 with some basic copper (II) carbonate that I didn't wash fully and the residual
sodium salts left were a pain to remove. they would form clusters around the nice CuCl2 crystals as well the sodium salts also climb the
side of the crystallization vessel, green of course showing a loss in yield of CuCl2.
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1225
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
Quote: Originally posted by Syn the Sizer ![](images/xpblue/lastpost.gif) |
I would avoid neutralizing with anything, I made some CuCl2 with some basic copper (II) carbonate that I didn't wash fully and the residual
sodium salts left were a pain to remove. they would form clusters around the nice CuCl2 crystals as well the sodium salts also climb the
side of the crystallization vessel, green of course showing a loss in yield of CuCl2. |
I once try if I can grow Na2[CuCl4] crystals from CuCl2+NaCl solution. This was failure, I had only mix of CuCl2 and NaCl. So I recrystallized CuCl2
from ethanol - this is good way how to remove NaCl contamination.
|
|
Syn the Sizer
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 591
Registered: 12-11-2019
Location: Canada
Member Is Offline
|
|
I feel stupid, I knew CuCl2 was soluble in ethanol but NaCl was not. I will need to keep that in mind if I encounter this again.
|
|