Refinery
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 371
Registered: 17-2-2014
Member Is Offline
Mood: Still
|
|
TCCA purification, strange things happen
I have TCCA that has 50-75% of it and 25-50% of NaCO3.
I attempted to purify it by powdering the tablets, and dissolving 100g of powder with 200ml of acetone.
A white, milky sludge formed, that filtered clear at first. The sludge quickly clogged the filter.
Then, the solution began turning greenish and bubbles started to evolve. When I had filtered part of it, the filtrate was noticeably green, and it
darkened as time passed. I crashed 1:1 volume of water to filtrate, and white mass instantly formed. When I re-filtered this, more white mass formed
in the second filtrate, and I thought to test and add more water, and more of it formed. Strange is, the more water I added, the more it expanded like
a sponge.
Then I started to feel burning in my eyes, and I decided to abort and discard the whole process.
So, was there cloroacetone formed?
I thought purifying TCCA was an easy task, but I once again lost my faith in my skills. What should be the right way to do it? I could not find
descriptions on purifying TCCA properly, only just claims that it is one of the most easily available otc chemical. But what can you do with it when
it's all impure?
EDIT: now that I think it (before bed), couldn't I just have crushed the tabs, dissolve the whole junk in water, let it settle/filter it and let it
evaporate to dryness? There is this other brand that dictated it has ~5% copper sulfate, ~5% Al sulfate and min 89% of TCCA. Should there be issues
with water purification?
I need it for styrene oxidation.
[Edited on 27-4-2020 by Refinery]
|
|
morganbw
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 561
Registered: 23-11-2014
Member Is Offline
Mood: No Mood
|
|
Process for purifying trichlorocyanuric acid
I have never purified TCCA so cannot offer real advise other than the link.
One possibility is to pulverize it and slurry it in H2O. The water should dissolve the Na2CO3 leaving most of the TCCA undissolved. Strain it through
a piece of cloth or filter and dry what you have.
You possibly made some chloroacetone.
[Edited on 4/27/2020 by morganbw]
|
|
Refinery
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 371
Registered: 17-2-2014
Member Is Offline
Mood: Still
|
|
It appears to me that Al and Cu sulphate do not interfere with the reaction, hence the other brand tablets could be used directly, possibly with
minimal decanting, due to them being insoluble in acetone. Any residues would react with NaOH phase and turn into water and sodium sulphates.
|
|
njl
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 609
Registered: 26-11-2019
Location: under the sycamore tree
Member Is Offline
Mood: ambivalent
|
|
I'm not too aware of the process, but I don't think any appreciable amount of Chloroacetone was formed both due to the lack of an acid in the solution
and because it is a strong lachrymator that you would likely notice in the air.
|
|
Refinery
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 371
Registered: 17-2-2014
Member Is Offline
Mood: Still
|
|
I had to leave the proximity due to my eyes burning. So, something was there.
|
|
UC235
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 565
Registered: 28-12-2014
Member Is Offline
Mood: No Mood
|
|
I've always just used TCCA for chlorine generation with HCl, for which contaminants are mostly irrelevant except carbonate would introduce CO2 to the
gas stream. Some brands are 99% and I think it's worth trying to track down because the stuff is a potent oxidant and reacts with lots of the things
you'd like to try purifying it with.
If you really need it pure, I am under the impression that it is not that hard to produce by leading chlorine gas into a solution of trisodium
cyanurate. Cyanuric acid itself can be recrystallized from boiling water (though very large volumes are needed since its solubility is low even at
boiling) but probably the white paste left from a chlorine generator can be boiled with some HCl (outside!) once or twice, and after a water wash be
more than good enough.
[Edited on 28-4-2020 by UC235]
|
|
Fyndium
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
There are brands that contain a very large amount of sodium carbonate as filler. It does something weird with acetone indeed. Perhaps there was also
something else.
Other brand contains about 10% of copper sulfate and other acetone insoluble stuff that leaves behind when TCCA is dissolved. It is easy to filter out
to result in crystal clear solution. This could be used to crystallize pure TCCA, but I've always prepared this solution in situ and used immediately
after determining the amount of impurities above. If these are the impurities, they have nil effect on chlorine production.
|
|
NitratedKittens
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 131
Registered: 13-4-2015
Location: In the basket with all the other kittens
Member Is Offline
Mood: Carbonated
|
|
Quote: Originally posted by morganbw ![](images/xpblue/lastpost.gif) | Process for purifying trichlorocyanuric acid
I have never purified TCCA so cannot offer real advise other than the link.
One possibility is to pulverize it and slurry it in H2O. The water should dissolve the Na2CO3 leaving most of the TCCA undissolved. Strain it through
a piece of cloth or filter and dry what you have.
You possibly made some chloroacetone.
[Edited on 4/27/2020 by morganbw] |
Have just carried out the procedure in the link on some hot tub TCCA tablets. No noticeable hydrogen chloride was evolved. Got a very low yield (9g of
TCCA from 100g of tablets) because i did not crush my tablets fine enough and the binders they put in them to make them slow release mean they don't
dissolve readily unless crushed to a very fine powder.
Basket of kittens for you ........BOOM
|
|
macckone
Dispenser of practical lab wisdom
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Get pure cyanuric acid. Put it in solution. Bubble chlorine from the tcca through the pure stuff.
Otherwise, sodium carbonate is much more soluble than tcca in water.
Yes even tiny amounts of chloroacetone are a lacramator.
|
|
Fluorite
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 133
Registered: 26-12-2018
Location: United Arab Emirates
Member Is Offline
|
|
cyanuric acid should also be mixed with sodium hydroxide to make sodium hypochlorite in situ?
|
|
macckone
Dispenser of practical lab wisdom
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Fluorite,
Base of your choice.
Probably do not want excess base.
Just enough to keep in neutral.
|
|
Fyndium
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1192
Registered: 12-7-2020
Location: Not in USA
Member Is Offline
|
|
The pool tablets are hard af, and when I handled them ages ago, I just took pliers and crushed them to granular consistency and put them in handheld
blender to pulverize it. Tip: use an actual respirator mask, because you will be breathing what is like powdered chlorine that goes everywhere, and
the odor will linger your nose for a long. Non-powdered TCCA will take forever to dissolve in acetone, and boiling it seem to encourage chloroacetone
formation, perhaps because by a catalysis caused by presence of metal ions. If TCCA powder smells nasty, even trace amounts of chloroacetone will just
burn your eyes and nose and make you run away from the place.
There seem to be a brand that consists over 90% of TCCA and rest of some chlorides and sulfates, which do not go into acetone and can be removed fully
by simple filtration.
|
|