Pages:
1
2
3
4 |
pastor
Harmless
Posts: 27
Registered: 12-12-2018
Member Is Offline
|
|
What is wrong with MDMA production nowdays?
Hello Science Madness,
I have been in discussion with an international collaboration of individuals in a drug harm reduction forum, who have noticed significant variation
between MDMA batches that have all tested as MDMA through GCMS lab analysis. These variations have been confirmed by multiple people and under a wide
variety of circumstances. Variation includes lack of traditionally observable physical phenomena such as mydriasis and profuse sweating, as well as a
lack of traditional sensory enhancement and euphoria. Before you assume the answer is user tolerance, please note that the variation has also been
noted in "virgin" users of MDMA. To simplify our discussion of this phenomena we have been calling traditional product with typical results "magic"
and non-traditional product with muted results "meh."
Our own research has revealed a few possibilities for what may be occurring, but we would like to get some more scientific feedback.
Here are some of the research articles that we read while considering this issue:
This research article seems to indicate that there are structurally similar compounds that could masquerade as MDMA to GCMS testing: http://etd.auburn.edu/bitstream/handle/10415/1304/AWAD_TAMER...
This article shows that some synthesis byproducts could have an impact on transporters and also on the effect of MDMA: https://sci-hub.tw/https://doi.org/10.1124/jpet.105.084426
These articles discuss variations in synthesis methods, and how those variations produce different byproducts:
1. Sci-Hub | A review of impurity profiling and synthetic route of manufacture of methylamphetamine, 3,4-methylenedioxymethylamphetamine, amphetamine,
dimethylamphetamine and p-methoxyamphetamine. Forensic Science International, 224(1-3), 8–26 | 10.1016/j.forsciint.2012.10.040
2. Sci-Hub | Determination of synthesis method of ecstasy based on the basic impurities. Forensic Science International, 152(2-3), 175–184 |
10.1016/j.forsciint.2004.08.003
3. Basic and neutral route specific impurities in MDMA prepared by different synthesis methods Comparison of impurity profiles
Currently, it seems to us that variations in MDMA synthesis methods result in variations of product due to either a) presence of active impurities or
b) substitution of structurally similar compounds. Is this probable? Would synthesis techniques result in enough product variation to alter the end
user experience in a significant way? If so, since GCMS testing does not appear to be detecting what is occurring, any ideas for how to identify these
impurities? Also, any theories on what these impurities could be (specifically)?
The original thread is located at https://www.bluelight.org/xf/threads/what-is-wrong-with-the-...
I would like to emphasize that the main focus of the above discussion is not having better highs or which synth works best, but rather aiming to find
what's happening and which substances and procedures are responsible, so to possibly formulate and make available a test like the various Marquis,
Mandelin etc.
Thanks for your help!
[Edited on 12-1-2020 by pastor]
|
|
dextro88
Hazard to Self
Posts: 60
Registered: 20-10-2018
Location: In the lab
Member Is Offline
Mood: loading...
|
|
i dont know if its the right place to ask this question, since chemist here dont produce MDMA or altest the major of them, i think the problem is with
your MDMA, maybe its purity is lower than previsous batches you had and with the growing of the tolerance you think you have lost the magic, one of
the good thinks abaut mdma is the tolerance developed dont kill the magic so try with a higher dosage or try another stuff from enterly different
places, the availability of precursors to MDMA now are very hot and usualy the stuff comersialy available is the cleanest from decades.
[Edited on 12-1-2020 by dextro88]
|
|
S.C. Wack
bibliomaster
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
No mention of optical rotation eh. Throw some MDA, MDPV, etc. at the lab and see if they say it's MDMA.
|
|
pastor
Harmless
Posts: 27
Registered: 12-12-2018
Member Is Offline
|
|
Sorry just to be crystal clear, not asking about any input related to MDMA production as no one is producing illegal substances here.
Please have a look in the thread posted above if you have some spare time.
tests show that meh product is racemic as it should be, not an optical isomer issue
the "meh" product seems to produce sickness later on, and it may be dangerous and with unknown long term effects. Users are seeing the MDMA result
from testing companies and assuming everything is ok, but something is not normal. Also some testing companies provide percentages of strength and
that even 85% MDMA with no other detected compounds is producing the meh results, and that taking more to compensate does not seem to make a
difference.
[Edited on 12-1-2020 by pastor]
|
|
Corrosive Joeseph
National Hazard
Posts: 915
Registered: 17-5-2015
Location: The Other Place
Member Is Offline
Mood: Cyclic
|
|
This sounds like the classic safrole vs PMK Glycidate debate..... I have no experience with this, but many people seem to think that ever since
safrole was replaced by Chinese Glycidate as the main ecstacy precursor, about, hmmm, maybe 10 or more years ago now, well apparently ever since then
it just has not been the same.
I'm too busy to post links now but there are surely some threads about this on Bluelight.
/CJ
Being well adjusted to a sick society is no measure of one's mental health
|
|
sodium_stearate
Hazard to Others
Posts: 255
Registered: 22-4-2011
Location: guard duty at the checkpoint
Member Is Offline
Mood: No mask.
|
|
what is wrong with it?
Maybe it's because it's being cooked
somewhere in a garage, in a garbage can lid.
"Opportunity is missed by most people
because it is dressed in overalls and it
looks like work" T.A. Edison
|
|
dextro88
Hazard to Self
Posts: 60
Registered: 20-10-2018
Location: In the lab
Member Is Offline
Mood: loading...
|
|
they both produce MDP2P from both safrole or PMK glycidate and use the old fucking leuckard to produce the same reacemic MDMA, but in the Safrole days
they were aminating iodosafrole too, but iodo/bromo safrole or even safrole contamination cant provide any benefits for the effects, maybe the safrole
that they have used have had myristicin,elemicin or other esential oils in it even in minor percentages and that makes the differences, because the
MDMA now is pure than ever.
|
|
pastor
Harmless
Posts: 27
Registered: 12-12-2018
Member Is Offline
|
|
quite likely, this stuff is being produced in thousands of kilos around the globe..
|
|
Corrosive Joeseph
National Hazard
Posts: 915
Registered: 17-5-2015
Location: The Other Place
Member Is Offline
Mood: Cyclic
|
|
Yes...... But on a huge scale by a small number of producers.
/CJ
Being well adjusted to a sick society is no measure of one's mental health
|
|
Cou
National Hazard
Posts: 958
Registered: 16-5-2013
Member Is Offline
Mood: Mad Scientist
|
|
This thread better not be placed in detritus.
it dismays me how many chemists frown upon discussion of recreational drug synthesis.
they're too serious. they can't take a joke.
there's a difference between talk, and actual doing.
even if i will never take the risk of making MDMA, it's fun to know that if i really really ever wanted to make some for myself, i could do it, if i
wanted to.
|
|
S.C. Wack
bibliomaster
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
That's a pretty hot precursor for like 15 years now, maybe people have switched and are ordering something wrong or something is getting lost in
translation. I'd look for things like Shulgin's methyl-j.
|
|
karlos³
International Hazard
Posts: 1520
Registered: 10-1-2011
Location: yes!
Member Is Offline
Mood: oxazolidinic 8)
|
|
Nah I did methyl-j, and it feels totally different, but even better than MDMA, no way someone can mistake that for it.
|
|
sodium_stearate
Hazard to Others
Posts: 255
Registered: 22-4-2011
Location: guard duty at the checkpoint
Member Is Offline
Mood: No mask.
|
|
street drugs
The simple answer is that anyone can make anything
and sell it named whatever they want.
There is absolutely no quality control.
Make it in some garage somewhere in a garbage
can lid.
Or maybe in a big factory somewhere in a huge
open rusty kettle of some sort.
Then you buy it. Then you take it. Then you die.
Any questions?
"Opportunity is missed by most people
because it is dressed in overalls and it
looks like work" T.A. Edison
|
|
pastor
Harmless
Posts: 27
Registered: 12-12-2018
Member Is Offline
|
|
You are missing the point of the thread.
This substance test as MDMA, not only on Marquis and other reagents, but it fools even testing companies that use GC/MS and other tools to determine
substance composition.
So besides the fact that you may die it should be interesting from a chemical point of view why a substance test as another one, but its effects and
dosage are totally different?
|
|
j_sum1
Administrator
Posts: 6335
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
You say that it has the same profile as MDMA in gas chromatography mass spectroscopy. You also say that you have identified the product as racemic
(although you did not mention how). Your third test is anecdotal physiological effect, which is really insufficient for any kind of conclusion:
although it has caused you to raise the question. A scientific approach requires you to be a lot more systematic than swapping stories.
Logically your next step is NMR.
Posters are right: a street drug could have all manner of junk in there. Even though different sources describe similar properties, this is in no way
a guarantee that you are all describing the same thing. That is the nature of illicit drugs.
There are limitations to the efficacy of the harm reduction philosophy. Lack of quality control and lack of proper identification are but two.
Inability to address the nature of addiction and dependence is a third.
|
|
morganbw
National Hazard
Posts: 561
Registered: 23-11-2014
Member Is Offline
Mood: No Mood
|
|
As Sir @j_sum1 stated NMR needs to be done and then read by someone who can understand the results.
If still confusing then go from carbon NMR to proton NMR. Someone in the field can say exactly what the compound is.
I am so happy that I do not have to suffer the effects of the market.
|
|
sodium_stearate
Hazard to Others
Posts: 255
Registered: 22-4-2011
Location: guard duty at the checkpoint
Member Is Offline
Mood: No mask.
|
|
contaminated stuff
If it was made in a proper lab, using properly
pure and unadulterated ingredients, and performed
by properly trained people using the proper procedure,
it would have the correct properties.
Only someone with the knowledge and the background
of Shulgin would be able to answer this question
and find the exact answer to "what's wrong?".
The short answer is someone's obviously using bad
ingredients or using a bad procedure which allows
contamination.
Street drugs can be anything.
"Opportunity is missed by most people
because it is dressed in overalls and it
looks like work" T.A. Edison
|
|
Assured Fish
Hazard to Others
Posts: 319
Registered: 31-8-2015
Location: Noo Z Land
Member Is Offline
Mood: Misanthropic
|
|
@pastor
You have made an unsubstantiated claim and then expected us to disucss it as if it were unfalsifyable.
The references you have posted do not support your claim but instead suggest solution to your unsubstantiated claim.
The bluelight thread is pretty much all anecdotal evidence as j_sum pointed out.
Do you really expect us to believe you have put together a culmination of reports where people have taken street drugs and analytically analysed them
to find them all relatively pure before ingesting and accurately recording data on the effects.
You haven't provided us with any evidence that any of this has occurred. If you were to actually find some new scientific observation like the one you
claim, then the first thing you would do is scrupulously analyse the methods to find flaws or mistakes that would have changed your results from the
predicted theory.
You cannot even do this with what little information you have provided, for all we know you could be talking out your asshole.
If i didn't know any better id assume this as another exotic ploy to get us to spill our dirty little secrets on how to make drugs.
[Edited on 13-1-2020 by Assured Fish]
Sufficiently advanced science is indistinguishable from madness.
|
|
clearly_not_atara
International Hazard
Posts: 2800
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
My pet theory is still that old ecstasy was spiked with amphetamine (duration 3-6 hours) and today's ecstasy is either not or it's got methamphetamine
(duration 10-20 hours). Methamphetamine's half-life is mismatched with MDMA which makes it a poor adjuvant, but it's more likely to be synthesized in
clandestine labs these days than regular old d-amph.
|
|
Corrosive Joeseph
National Hazard
Posts: 915
Registered: 17-5-2015
Location: The Other Place
Member Is Offline
Mood: Cyclic
|
|
https://www.reddit.com/r/Drugs/comments/3v5m3n/are_there_2_t...
/CJ
Being well adjusted to a sick society is no measure of one's mental health
|
|
draculic acid69
International Hazard
Posts: 1371
Registered: 2-8-2018
Member Is Offline
|
|
Quote: Originally posted by karlos³ | Nah I did methyl-j, and it feels totally different, but even better than MDMA, no way someone can mistake that for it. |
I got arrested once for possession of xtc tablets.they were mbdp or methyl-j which is far superiority to mdma but the lab report said it was mdma.so
whether they ran a gcms or whatever and knew it was mbdp and just ran with the mdma cause they could or they only confirmed it was a md amine of some
sort of if they didn't do more than a presumptive feild test i don't know.and a few wks ago they found 700kgs of mdma and said it's the purest they've
ever seen.
|
|
draculic acid69
International Hazard
Posts: 1371
Registered: 2-8-2018
Member Is Offline
|
|
Quote: Originally posted by clearly_not_atara | My pet theory is still that old ecstasy was spiked with amphetamine (duration 3-6 hours) and today's ecstasy is either not or it's got methamphetamine
(duration 10-20 hours). Methamphetamine's half-life is mismatched with MDMA which makes it a poor adjuvant, but it's more likely to be synthesized in
clandestine labs these days than regular old d-amph. |
In my country ppl stopped adding meth to pills when mdma became cheaper than meth 13 yrs ago.around the same time as psuedoephedrine became hard to
get.and while there was always ppl mixing mdma and meth in xtc pills it wasn't more common than 'occasionally happened'.
|
|
pastor
Harmless
Posts: 27
Registered: 12-12-2018
Member Is Offline
|
|
Quote: Originally posted by j_sum1 | You say that it has the same profile as MDMA in gas chromatography mass spectroscopy. You also say that you have identified the product as racemic
(although you did not mention how). Your third test is anecdotal physiological effect, which is really insufficient for any kind of conclusion:
although it has caused you to raise the question. A scientific approach requires you to be a lot more systematic than swapping stories.
Logically your next step is NMR. |
Not only testing companies were involved but also private labs. I'm reporting their findings.
NMR has been done, check it here: https://www.bluelight.org/xf/threads/what-is-wrong-with-the-...
Quote: |
A "meh" sample was submitted for testing. The testers ran NMR 1H and 13C along with MALDI.
The MALDI came up 193.25 g/mol the mol weight of MDMA.
This batch of MDMA is a mixture of something that has practically the same NMR spectra as MDMA (both 1H and 13C) which means it has to contain the
same carbon backbone and the same structural features, it cannot be an isomer because there are no isomers of MDMA which have the same mass and the
same NMR spectrum.
1H NMR showed the issue on peak 9. Also, there is a mini peak at 207. Perhaps an an aldehyde or ketone. Overall, the sample has carbonyl impurities.
The structure seems very close to what MDMA should look like in NMR but not quite. |
@Assured Fish
Quote: | Do you really expect us to believe you have put together a culmination of reports where people have taken street drugs and analytically analysed them
to find them all relatively pure before ingesting and accurately recording data on the effects.
If i didn't know any better id assume this as another exotic ploy to get us to spill our dirty little secrets on how to make drugs.
|
Many individuals has gotten their substance analyzed by the many companies that does substance testing, both european and north american.
range of purity (from what i can recall, it's a 180 pages long thread) is from 85 to 95%.
You can check the bluelight thread if you want.
there's plenty of info around (including here!) on how to make mdma, not my goal.
|
|
karlos³
International Hazard
Posts: 1520
Registered: 10-1-2011
Location: yes!
Member Is Offline
Mood: oxazolidinic 8)
|
|
There is no way that some enantiomer mixture is achieved, it is either racemic(always) or enantiopure(never).
The only people who resolve enantiomers are curious home laboratorists.
And their produced enantiopure compound never makes it on the black market.
In short, be it safrole or the glycidate, MDMA is always made from piperonyl ketone.
So it should not differ at all from each other.
I even know people who got other routes to work(i.e. the halosafrole one), but it is just the same of course.
My opinion is, these are just plain urban myths, as the usual drug users do spread for most of the time, simply because they don't know better.
I don't give a damn about their unverified ramblings.
[Edited on 13-1-2020 by karlos³]
|
|
j_sum1
Administrator
Posts: 6335
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
Let's see if I have your story correct.
Here are a bunch of lab results from an assortment of samples of unknown origin. (They are all bona fide. Honest.)
Here are pages of uncorrelated anecdotal evidence on a message board.
My junkies are unhappy.
Guess what crap is in the pills.
|
|
Pages:
1
2
3
4 |