Hawkguy
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 326
Registered: 10-10-2014
Location: British Columbia (Canada eh!)
Member Is Offline
Mood: Body is Ready
|
|
OTC Dimethyl Ether
I don't know if this is covered already, but it turns out Dimethyl Ether is sold in grocery stores/ pharmacies for the removal of warts. It seems
pure, but the price isn't great. A little bottle costs just over $20...
|
|
blargish
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 166
Registered: 25-9-2013
Location: Canada
Member Is Offline
Mood: Mode Push
|
|
Wikipedia states that a mixture of dimethyl ether and propane is commonly used to freeze warts (since it is a gas at room temp). So I assume that the
bottle you found it in has a spray nozzle?
BLaRgISH
|
|
Hawkguy
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 326
Registered: 10-10-2014
Location: British Columbia (Canada eh!)
Member Is Offline
Mood: Body is Ready
|
|
Yes, about 30ml in a small bottle with a spray nozzle. When I checked the packaging, it only said it contained Dimethyl Ether, so I assumed I just
found a pretty chill Methylating agent for future reference.
|
|
diddi
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 723
Registered: 23-9-2014
Location: Victoria, Australia
Member Is Offline
Mood: Fluorescent
|
|
I would still go for automotive starter fluid which is generally quite good value for money.
eg (for .au)
http://www.supercheapauto.com.au/online-store/products/CRC-A...
MSDS states 10-30% diethyl ether so about 100grams for 15$
Beginning construction of periodic table display
|
|
BromicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3237
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
For what it's worth diddi, the original poster was talking about di<b>methyl</b> ether, not di<b>ethyl</b> ether. Although I
don't see diemethylether from as being very useful to a home chemist, it is an interesting tidbit of knowledge that it is in an over the counter
product.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
At the moment you can buy this material in pure form as an extraction agent for oils from all kinds of plants. It is sold on eBay, but also by many
other webshops online, at least in the EU. I purchased a gas cylinder of this, with appr. 500 ml of the gas in liquid form. Just search eBay for "DME"
or "dimethyl ether". It is much cheaper than the prices, mentioned in this thread in earlier posts.
I did an interesting experiment with dimethyl ether, in making a solution of an oxonium salt. Dimethyl ether dissolves very well in conc. H2SO4 (1 ml
of H2SO4 certainly dissolves 100 ml of the pure gas and above the resulting liquid there isn't any vapor pressure). I took 5 ml or so of H2SO4 and all
together I think I have dissolved appr. half a liter of the gas in this 5 ml of acid. The volume of the liquid increases considerably and also quite
some heat is produced when the gas dissolves in the acid. I used a small bottle with the acid in it and let the bottle fill with gas and waited till
most of it is absorbed (swirling around the liquid somewhat) and then let is cool down again before letting air in (underpressure!). After three
rounds of letting air in, I added the next amount of gas and repeated this a few times, until absorption of the gas becomes slower.
This liquid I obtained is an ionic liquid, conducting electricity quite well. The compound forms ions:
H3C-O-CH3 + H2SO4 ---> H3C-O(H+)-CH3 + HSO4(-)
So, you get a solution of dimethyloxonium bisulfate in H2SO4.
Dimethyl ether resembles dimethylamine somewhat, which forms dimethylammonium ions. Dimethylammonium ions, however, are more stable than
dimethyloxonium ions.
I also tried diluting the dimethyloxonium bisulfate in water, but that does not work. As soon as the liquid comes in contact with water, it sinks to
the bottom and most of the dimethyl ether is released as gas. This is accompanied with a fairly loud hissing/bubbling sound. Remarkably little heat is
produced in mixing this liquid with water (much less so than mixing conc. H2SO4 with water). The final liquid, however, just is dilute H2SO4 probably
with a little dimethyl ether dissolved as well. I do not think that in water there still is an appreciable amount of the oxonium ion present.
I'll keep around some of this solution. Let's see how stable it is and in the meantime I will look for experiments which I can do with this oxonium
ion. It really is a pity that it is not stable in water, this limits its usefulness in experimenting.
|
|
Pumukli
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 694
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
"found a pretty chill Methylating agent for future reference"
Really? What can be methylated by DME?
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
DME is not a strong methylating agent, it actually is fairly inert at room temperature. At elevated temperatures of a few hundreds C, however, it is
very reactive. This also makes it extremely flammable.
I intend to use it for solution chemistry experiments.
Btw, if you are in the EU, this may be interesting for you: https://420shop.nl/dexso-gas.html
Here I purchased the gas.
|
|