snow
Harmless
Posts: 1
Registered: 23-3-2006
Member Is Offline
Mood: No Mood
|
|
KCLO3 -> KCLO4
hello all
you have any ideas of how to convert passtium chlorate to passtium prechlorate with out electrolisis
|
|
|
Nerro
National Hazard
Posts: 596
Registered: 29-9-2004
Location: Netherlands
Member Is Offline
Mood: Whatever...
|
|
heat it....
It shall decompose into KClO4 and KCl
|
|
|
Darkblade48
Hazard to Others
Posts: 411
Registered: 27-3-2005
Location: Canada
Member Is Offline
Mood: No Mood
|
|
Can you simply heat it? From an MSDS:
Hazardous Decomposition Products:
Above the melting point it decomposes into perchlorate and oxygen. Emits toxic fumes of chlorine and potassium oxide when heated to decomposition.
The melting point that I found (from the same MSDS) was 368 C too.
|
|
|
woelen
Super Administrator
Posts: 8013
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
It must be heated very carefully. When it starts to melt, then continue, until it just becomes liquid and very slowly bubbles of oxygen are produced.
When it is kept at a constant temperature, then after a while it solidifies again. If the solid has solidified, then it consists of a mix of KClO4 and
KCl. By crushing it and separation by means of large difference in solubility in cold water you have KClO4.
Keep in mind though, that this is not the safest way of making KClO4. Molten KClO3 is very unstable and when accidently some organics (e.g. a hair, a
speck of dust) enter the molten KClO3, then you can get a very violent reaction. So, perform the experiment with very small quantities.
|
|
|
vulture
Forum Gatekeeper
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
This topic has been discussed ad nauseam.
Use the searchfunction.
Closed.
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
