| Pages:
1
2 |
learner
Harmless
Posts: 7
Registered: 12-3-2006
Member Is Offline
Mood: No Mood
|
|
Vinegar to Glacial Acetic Acid Via Charcoal
Trying to Find Info On Johann Tobias Lowitz's 1789 method of concentrating Dilute acetic acid by repeatedly passing over charcoal. I can find very
little info other than that he obtained GAA in this manner.
|
|
|
evil_lurker
National Hazard
Posts: 767
Registered: 12-3-2005
Location: United States of Elbonia
Member Is Offline
Mood: On the wagon again.
|
|
Just buy the stuff... its not worth the hassle to make it.
Find the right photo chemistry store and have them order you a coupla gallons for around $35 or so each.
|
|
|
BromicAcid
International Hazard
Posts: 3253
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
Maybe it's not worth the hassel, but maybe it would be fun? Way to shoot someone down right off the bat. Personally I would be interested in this
method. But I don't get how it would work. I really don't know that much about activated carbon, 'one of nature's mysteries' I would explain if
pressed but my first impression is that it would work to remove the acetic acid from the water considering it sucks up all the other oganic stuff you
usually use it to get rid of. So how would it concentrate it, does it absorb water appreciably, I never noticed.
|
|
|
lordmagnus
Hazard to Self
Posts: 92
Registered: 10-1-2006
Location: Webster, TX
Member Is Offline
Mood: No longer annoyed ( I found a new girlfriend)
|
|
Couldn't you distill pickeling vinegar to an extremely high concentrations of acetic acid?
I\'ll kill a man in a fair fight, or if I think he is gonna start a fair fight, or if he\'s bothrn me allot, or if I am getin payed good, or probably
over a good woman.
-Jayne Cobb (Serenity) |
|
|
BromicAcid
International Hazard
Posts: 3253
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
Now there is a huge thread on that somewhere around here, I think at least three pages on if you can distill OTC vinegar to get concentrated acetic
acid, we got hung up on if there was an azeotrope or not and I don't know if anyone came to a consensus on the issue.
|
|
|
leu
Hazard to Others
Posts: 368
Registered: 13-10-2005
Member Is Offline
Mood: No Mood
|
|
CRC's Handbook of Chemistry and Physics lists an azeotrope of acetic acid and water as boiling at 76.6 degrees Centrigrade and being composed of 97%
water and 3% acetic acid. The industrial method for the preparation of glacial acetic acid is distillation using sulfuric acid as a drying agent. An
old post, unfortunately currently unavailable:
lugh
(Moderator)
11-22-02 16:37
No 382358
References
(Rated as: excellent)
A calculated amount of potassium or sodium bisulfate may bee used instead of concentrated sulfuric acid, in producing the so called "soda acid"  Prior to the introduction of synthetic acetic acid, this was the most anhydrous form
of glacial acetic acid available. Some patented methods of distillation are DE220705, US1463209, FR612595, FR449035 and US1196329 Electrolytic purification methods can bee found in US1104978 and US1210792 Some methods of concentration by distillation of acetic acid are GB218271, GB218272,
FR594925, GB204196, GB187603, US1477076, GB230447, GB296794, GB3000923, GB356741 and GB298137 Some non patent references are Chem Ztg 55 881 (1931), Chem and Met Eng 36 657
(1929), Ind Eng Chem 24 722 (1932) & 23 482 (1931) and Z Agnew Chem 20 148 (1916) Concentration of acetic acid by adsorption is disclosed in GB332983 and Z Physikal
Chem 29 326 (1925) Removal of water by selective adsorption is
patented in GB314913, US1492717, US1492718, US1817993, GB338187, DE230171, DE282263 and DE292959 Concentration of acetic acid by freezing is the subject of GB378463 and GB378463 Some more applicable references are US2275802, JACS 54 1429 (1932),
53 2881 (1931) & 58 2585 (1936), JCS 1751 (1910) and Ind Eng Chem 20 1379 (1928) Probably the most effective drying agent available to most bees would be anhydrous
copper sulfate
[Edited on 22-3-2006 by leu]
Chemistry is our Covalent Bond
|
|
|
Darkblade48
Hazard to Others
Posts: 411
Registered: 27-3-2005
Location: Canada
Member Is Offline
Mood: No Mood
|
|
Wow, azeotrope at 97% water and 3% acetic acid? That's surprising, considering that household vinegar is already 5% acetic acid
|
|
|
JohnWW
International Hazard
Posts: 2849
Registered: 27-7-2004
Location: New Zealand
Member Is Offline
Mood: No Mood
|
|
Is the real aim of the exercise then to produce acetic anhydride, for acetylation reactions on alcohols and phenols? That would involve a dehydration,
probably either by reaction with acetyl choride in the presence of pyridine (which forms the hydrochloride), or by (on a solid substrate like AlPO4)
dehydration at 700ºC to ketene which can then react with further acetic cid to form the anhydride.
BTW Perry's Chemical Engineers' Handbook, ch.13, does not seem to list a water-acetic acid azeotrope, although it lists a water-propionic acid one
with 94.7% propionic acid.
|
|
|
MadHatter
International Hazard
Posts: 1346
Registered: 9-7-2004
Location: Maine
Member Is Offline
Mood: Enjoying retirement
|
|
Desiccants
What about other desiccants ? Aren't there other materials that would be suitable in extracting
the H2O out of the mix ? I found that dried out rock salt works well in dehydrating ethanol.
Just a few thoughts.
From opening of NCIS New Orleans - It goes a BOOM ! BOOM ! BOOM ! MUHAHAHAHAHAHAHA !
|
|
|
S.C. Wack
bibliomaster
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
This azeotrope only seems to exist in certain CRC's and nowhere else. I don't think that there are any azeotrope tables in my (23rd, 1939) edition.
Simple distillation of acetic acid of any concentration gives a weaker distillate and a stronger residue, it's that simple.
Anyone with access to the RSC archive can take a look for themselves, this is the article that I referred to in the earlier thread: http://dx.doi.org/10.1039/JS8621500270
|
|
|
evil_lurker
National Hazard
Posts: 767
Registered: 12-3-2005
Location: United States of Elbonia
Member Is Offline
Mood: On the wagon again.
|
|
I didn't mean to intentially shoot down learner this one, but I have BTDT. Sure it can be prepared in the lab, but it just so happens that acetic acid
is one of many chemicals that for all intents and purposes is better left to large scale industrial production. The reason why is because acetic acid
just totally violates the ideal gas law or whatever its called... it can be distilled feasibly, but only when there is a high enough concentration of
acetic acid to begin with... all the water is azeotropically removed first leaving only pure acid remaining.
The only practical home method I used to know of for concentrating vinegar is to add in a alkaline metal carbonate, boil off the water, and then add
that to concentrated sulfuric acid and distill. The catch to that is your basically exchanging one acid for another and it takes forever to boil off
all the water and distill the final product.
However after looking at the US1492718 patent, I think that this might be a much more viable method. You start off with anhydrous sodium sulfate
(which just happens to be cheaper than dog poop) and adding it to vinegar over 38C then cooling it to form Glauber's salt (sodium sulfate decahydrate)
and filtering off the acid. That is good, because anhydrous sodium sulfate can absorb 1.2 times its own weight in water then crystalize out of
solution. I also did not know this, but according to the patent, if Glauber's salt is heated above its crystalization point of 38 degrees, then
supposedly near anhydrous sodium sulfate is precipitated... that means that you could simply heat things up a bit, then filter off the sodium sulfate
and you would be good to go for another round saving massive amounts of time.
Still though it would require over 20 gallons of vinegar to make 1 gallon of GAA once losses are factored in and eat up a lot of time.
|
|
|
garage chemist
chemical wizard
Posts: 1803
Registered: 16-8-2004
Location: Germany
Member Is Offline
Mood: No Mood
|
|
What's up with all the people trying to use vinegar?
Vinegar is possibly the worst precursor to GAA you can use, with about 5% acetic acid content.
There is a product sold for descaling, cleaning and for food use (after dilution of course) that consists of 25% acetic acid and nothing else but
water (it says so on the back). It carries a warning sign saying "Irritant" and "Caution: Do not consume undiluted".
It is called "Essigessenz" in germany, and the appropriate english name for it would most likely be "spirits of vinegar" or "essence of vinegar".
I use this product all the time when aqueous acetic acid is required. Perfect for making sodium acetate by adding Na2CO3, which happens to be sold as
"washing soda" for about 1€ per 500g.
I have heard that a product consisting of 60% acetic acid is sold for use in commercial kitchens, though apparently it is only sold to commercial
users.
If you need GAA, go to the pharmacy and let them order a liter for you. It is absolutely not worth the effort to make it yourself, even when you have
25 or 60% acetic acid.
I tried to distill the 25% AcOH through a column once, and the boiling point remained constant at 100°C. The distillate contained as much acetic acid
as the residue!
I think it was due to my column being ineficient, since the liquid didn't wet the glass but condensed as small droplets inside it. I think it was
contaminated with silicone oil, I heard that silicone oil does this and renders the column ineffective for fractionation of watery liquids.
|
|
|
jack-sparrow
Hazard to Others
Posts: 130
Registered: 30-11-2005
Location: Ask Big Brother
Member Is Offline
Mood: ahoy!
|
|
1) Couple months ago , I prepared about 2.3 kg of acetic acid containing about 1-2 percent water. You can distill out water over a glass helices
column (1 inch wide * 6 feet tall) then distill out acetic acid. The temperature change is drastic from 100 to 115 degC when the water is gone. I did
not check however if the distilled water contained acetic acid because GC columns dont like water. If you have a little bit of water in acetic acid,
there is no problem to remove it.
2) Darkblade48 : Household vinegar is simply made from diluting industrial glacial acetic acid which is produced by the Monsanto process consisting in
the carbonylation of methanol.
3) Evil_lurker : I would be afraid that sodium sulfate would also trap the acetic acid in the crystalline clusters and you would lose a considerable
amount of it.
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Re: 2) -- you sure of that? I think most products have to be as natural as possible, i.e., why they don't allow industrial ethanol in alcoholic
drinks -- legally has to be fermented. Vinegar is a fermented product, too. Seems to me there's a faint odor of ethanol in vinegar, too (despite
being distilled?) although I might be remembering wrong or confusing the smell.
Tim
|
|
|
jack-sparrow
Hazard to Others
Posts: 130
Registered: 30-11-2005
Location: Ask Big Brother
Member Is Offline
Mood: ahoy!
|
|
I would not put my hand in the fire but the Monsanto process is THE cheapest way to make bulk acetic acid. You get methanol from the water-syngas
process which is a cheap process too. The fermentation process seems to be a long one which is limited by the scaleup possibility. Acetic acid is one
of the most mass produced chemical in the world. You need a fast and efficient way to generate huge quantities. I would think that it is the best
source to make 5% aa solution for domestic market. By the way, Eastman offers food grade, Kosher glacial acetic acid !!!
look here http://www.eastman.com/Product_Information/ProductHome.asp?P...
In the case of ethanol, there are a lot of process to make it. In alcoholic drinks, it always come from the fermentation of natural sugars which
generates also other flavors along with alcohol. Making a drink with absolute ethanol and fruit juice is a anti-gastronomic way to get hungover. 
By the way, "natural" is a very confusing word because people tends to forget that there are no differences between natural and artificial chemicals
when isolated in a pure form. Fermentation produced ethanol or synthetic ethanol is the same molecule. If it is pure, there are no possible
distinctions. Same thing for vanilla, vitamin C or sodium bicarbonate.
|
|
|
evil_lurker
National Hazard
Posts: 767
Registered: 12-3-2005
Location: United States of Elbonia
Member Is Offline
Mood: On the wagon again.
|
|
Unfortunately here in the USA, most phamacies only carry only pre-made stuff and compounding phamacies don't want to fool around with amateur
chemists. Thats the reason why ppl want to use vinegar is because it is the most readily available acetic acid source there is.... the 20%+ stuff can
be fairly difficult to find and if you had to order it would cost just as much to ship as the glacial due to extra water weight.
IIRC, the clear vinegar in the stores is actually the dark stuff that has been filtered over activated charcoal to remove impurities.
|
|
|
S.C. Wack
bibliomaster
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
No studur, all vinegar (by definition) is made by fermentation.
[Edited on 22-3-2006 by S.C. Wack]
|
|
|
jack-sparrow
Hazard to Others
Posts: 130
Registered: 30-11-2005
Location: Ask Big Brother
Member Is Offline
Mood: ahoy!
|
|
SC Wack is right
SC Wack : You are right. I went on the Heinz website and they state that their distilled white vinegar comes from corn. Which is known source of
ethanol.
http://www.heinz.com/jsp/consumer_faq.jsp
In wikipedia, they state another process :
| Quote: | | Most vinegar today is made in submerged tank culture, first described in 1949 by Otto Hromatka and Heinrich Ebner. In this method, alcohol is
fermented to vinegar in a continuously stirred tank, and oxygen is supplied by bubbling air through the solution. Using this method, vinegar of 15%
acetic acid can be prepared in only 2–3 days. |
http://en.wikipedia.org/wiki/Acetic_acid
The Monsanto process is for the industrial glacial acetic acid
|
|
|
garage chemist
chemical wizard
Posts: 1803
Registered: 16-8-2004
Location: Germany
Member Is Offline
Mood: No Mood
|
|
In Germany, pharmacies only carry pre- made stuff too.
If you want a chemical, they will always have to order it for you.
The catch is that pharmacies can order it (since they are authorised to do so) and are also authorised to sell chhemicals to the public if they have
no reason for being suspicious of illegal use of the chemical. The worst they can do is to decline the request.
If you are old enough and don't order stupid shit like e.g. KNO3 (no pharmacy is going to sell you that! They know exactly that most people who want
chemicals are trying to make illegal fireworks) chances are good that you will get what you want.
It is advantageous to tell the pharmacy from which supplier they should order, because it can get very expensive otherwise (they don't search for the
cheapest supplier).
|
|
|
chromium
Hazard to Others
Posts: 284
Registered: 27-6-2005
Member Is Offline
Mood: reactive
|
|
| Quote: | Originally posted by evil_lurker
You start off with anhydrous sodium sulfate (which just happens to be cheaper than dog poop) and adding it to vinegar over 38C then cooling it to form
Glauber's salt (sodium sulfate decahydrate) and filtering off the acid. That is good, because anhydrous sodium sulfate can absorb 1.2 times its own
weight in water then crystalize out of solution. |
I once did similar thing with magnesium sulfate. It works but almost all acetic acid gets absorbed by drying agent. You probably need some special
device to press acetic acid out of that powder. I did not find a way to do this. So i gave up and decided to use sulfuric acid and sodium acetate
route.
|
|
|
leu
Hazard to Others
Posts: 368
Registered: 13-10-2005
Member Is Offline
Mood: No Mood
|
|
Unless one is unable to obtain GAA, there's no reason to consider purifying vinegar by such means, it's just too expensive in terms of time and energy
 Just because an azeotrope isn't listed in a particular edition of CRC or Perry's
Handbook doesn't mean it can't exist in our universe Many combinations of
compounds exhibit azeotropic behavior even though Lecat or Horsley don't list them, let alone such abbreviated lists as are in the Handbooks  According to Kushner, Tatsievskaya, Babich & Serafimov Zh Fiz Khim
40 3010 (1966); CA 66 39364b; acetic acid and water don't form an azeotrope at 50 mm Hg 
Chemistry is our Covalent Bond
|
|
|
learner
Harmless
Posts: 7
Registered: 12-3-2006
Member Is Offline
Mood: No Mood
|
|
Reacting vinegar with sodium bicarbonate and boiling off the water to get sodium acetate. What does it typically look like as it boils down, It
started of quite clear but as it is getting less and less it is getting darker and darker and I can't imagine it leaving white crystals of sodium
acetate. The vinegar was distilled cane sugar variety, very clear, and the boiling vessel is large stainless steal pot.
Edit, its not as dark as I thought just looked dark in dark kitchen, but it is quite yellow is that normal.
[Edited on 23-3-2006 by learner]
|
|
|
neutrino
International Hazard
Posts: 1583
Registered: 20-8-2004
Location: USA
Member Is Offline
Mood: oscillating
|
|
Are you sure of the neutrality of the solution? If the solution was acidic the steel might have been attacked slightly.
|
|
|
learner
Harmless
Posts: 7
Registered: 12-3-2006
Member Is Offline
Mood: No Mood
|
|
It was neutral but has become slightly on the basic side as it has become concentrated.
|
|
|
praseodym
Hazard to Others
Posts: 137
Registered: 25-7-2005
Location: Schwarzschild Radius
Member Is Offline
Mood: crazy
|
|
Wait, why would it be basic? What is it that have caused this increase in pH?
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
