Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1225
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
Pink salicylic acid solution
Hi.
I prepared solution of salicylic acid in methanol in the work for several times and it always had pink colour. Why? Salicylic acid is colorless.
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4298
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Iron contamination or oxidation.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
Steam
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 238
Registered: 25-3-2014
Location: Minnesota
Member Is Offline
Mood: Triple Point
|
|
+1 to draconics recommendation. Might also, be some phenol contamination depending on the purity of the sample and its source.
DISCLAIMER: The information in this post is provided for general informational purposes only and may not reflect the current law in your jurisdiction.
No information contained in this post should be construed as legal advice from the individual author, nor is it intended to be a substitute for legal
counsel on any subject matter. No reader of this post should act or refrain from acting on the basis of any information included in, or accessible
through, this post without seeking the appropriate legal or other professional advice on the particular facts and circumstances at issue from a lawyer
licensed in the recipient’s state, country or other appropriate licensing jurisdiction.
|
|
vibbzlab
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 241
Registered: 6-11-2019
Member Is Offline
Mood: Always curious
|
|
If you can tell how you prepared it maybe we can see where did you get the impurity. Last day I made salicylic acid which was perfectly white in
color from aspirin tablets.
Amateur chemist. Doctor by profession
Have a small cute home chemistry lab.
Please do check out my lab in YouTube link below
This is my YouTube channel
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1225
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
I prepared it just by simply dissolving of salicylic acid in methanol.
Salicylic acid was p.a. quality (this means for analysis in CZ). On bottle is list with impurities:
Content: min. 99%
Loss on drying: max. 0,5%
Sulfate ash: max. 0,1%
Chlorides: max. 0,005%
Sulfates: max. 0,02%
Heavy metals (Pb): max. 0,001%
Melting point: 158-161°C
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1225
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
I found one topic on sciencemadness about it:
http://www.sciencemadness.org/talk/viewthread.php?tid=23300
|
|
rockyit98
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 283
Registered: 12-4-2019
Location: The Known Universe
Member Is Offline
Mood: no mood is a good mood
|
|
a picture would help.it could be Iron contamination reacting with salicylic acid (or phenol) and form a complex with ferric ions. it may be taking
time to form because Fe(ii) need air and time to convert Fe(iii) . https://en.wikipedia.org/wiki/Ferric_chloride_test#Chemistry
https://aip.scitation.org/doi/pdf/10.1063/1.4964529
"A mind is a terrible thing to lose"-Meisner
|
|
Abromination
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 432
Registered: 10-7-2018
Location: Alaska
Member Is Offline
Mood: 1,4 tar
|
|
It takes very little iron to discolor your solution. Iron III salicylate is dark purple even in very dilute solutions, so the pink could be attributed
to nearly trace iron in one of your reagents. Using technical grade MeOH, I have always gotten a purple solution when dissolving salicylic acid. I
remember it being acid and base sensitive, so if you add one or the other and the color goes orange, blue or disappears it should act as a
confirmation.
List of materials made by ScienceMadness.org users:
https://docs.google.com/spreadsheets/d/1nmJ8uq-h4IkXPxD5svnT...
--------------------------------
Elements Collected: H, Li, B, C, N, O, Mg, Al, Si, P, S, Fe, Ni, Cu, Zn, Ag, I, Au, Pb, Bi, Am
Last Acquired: B
Next: Na
--------------
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1225
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
I read on the internet that Fe3+ complex with salicylic acid is blue.
|
|
rockyit98
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 283
Registered: 12-4-2019
Location: The Known Universe
Member Is Offline
Mood: no mood is a good mood
|
|
why you go to internet for that? just mix some FeCl3 with salicylic acid that you ready got. feeling lazy? rusty nail would do.
"A mind is a terrible thing to lose"-Meisner
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3631
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Salicylic acid is easy to re-crystalise from water
(and makes interesting long hollow square crystals)
so try purification by re-crystalisation to check if the (suspected) iron contamination is in the salicylic acid, or the methanol.
You could also do a quick distillation of your methanol if required.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
Abromination
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 432
Registered: 10-7-2018
Location: Alaska
Member Is Offline
Mood: 1,4 tar
|
|
Heres a pic for you, it is not blue. Iron III salicylate.
Very very dilute solution containing only milligrams of SA and ferric chloride.
![A11E6655-3939-43BF-9D33-6D784EAC173F.jpeg - 588kB](https://www.sciencemadness.org/whisper/files.php?pid=626375&aid=78023)
[Edited on 11-18-19 by Abromination]
List of materials made by ScienceMadness.org users:
https://docs.google.com/spreadsheets/d/1nmJ8uq-h4IkXPxD5svnT...
--------------------------------
Elements Collected: H, Li, B, C, N, O, Mg, Al, Si, P, S, Fe, Ni, Cu, Zn, Ag, I, Au, Pb, Bi, Am
Last Acquired: B
Next: Na
--------------
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1225
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
Quote: Originally posted by rockyit98 ![](images/xpblue/lastpost.gif) |
why you go to internet for that? just mix some FeCl3 with salicylic acid that you ready got. feeling lazy? rusty nail would do.
|
I don't have salicylic acid in home. It is in my work, so it isn't mine.
Quote: Originally posted by Abromination ![](images/xpblue/lastpost.gif) | Heres a pic for you, it is not blue. Iron III salicylate.
Very very dilute solution containing only milligrams of SA and ferric chloride.[Edited on 11-18-19 by Abromination] |
Thank you.
|
|