RogueRose
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1590
Registered: 16-6-2014
Member Is Offline
|
|
Which should I use H2O2 of NaOCl to clean/sterilize virgin fibers/silk
I have some fiberous material that is similar to cotton, in that it comes from a plant (milkweed), but is more silky and fluffy - and is a great
insulator very similar to goose/duck down. The problem is that there are some tiny bugs mixed in from harvest as well as some very minor mildew/mold
on some ends of the strands (invisible unless under magnification & causes slight discoloration). The stuff is pretty water repellent/resistant
but it will take on water if the air is pressed out of the fiber while under water.
I figured I might soak the fibers in a "bleach" solution of either NaOCl or H2O2 with a little soap. I'm wondering which of these would be less
likely to cause any damage to the fibers. I'm wondering if using pure 3% H2O2 would be fine b/c it doesn't seem to damage clothing when I apply it,
but 3% bleach will definately damage the fabric - so IDK why the hypochlorite is more effective/damaging in bleaching.
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
Try some aqueous CuSO4 whose prep I have explored in one of my threads (see http://www.sciencemadness.org/talk/viewthread.php?tid=151055... ) where I employed a piece of copper metal, widely available NaHSO4, along with 3%
H2O2, some NaCl and a source of carbon.
But why a soluble copper salt?
Because copper ions, even in tiny amounts, are highly toxic to microorganisms.
Unfortunately, fish and other small animals find copper problematic, so be careful in your application and discarding excess solution (apply Washing
Soda, Na2CO3).
-------------------------------------------------------------------
Bleach approach is possible in very dilute amounts, but may still damage the fiber.
|
|
arkoma
Redneck Overlord
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1761
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
https://patents.google.com/patent/US5480788A/en
Interesting patent. Sez H2O2 in an alkaline solution (above pH 8.3) is effective
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3650
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Online
|
|
OxiClean (and competitors similar products) domestic powdered bleach is H2O2 complexed with Na2CO3 ...
sodium percarbonate.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
I do NOT recommend OxiClean, if you want a friendly agent. However, per the comments below, you likely have a PAA mix that I recall is recommended for
biological warfare decontamination (see my comments and references cited at https://www.sciencemadness.org/whisper/viewthread.php?tid=77... ), so possibly great when employed with tap water rich in Mn, but do read the
warning labels and discussion at a prior thread, extract below, link: https://www.sciencemadness.org/whisper/viewthread.php?tid=73... :
Quote: Originally posted by AJKOER ![](images/xpblue/lastpost.gif) | First, unlike Sodium perborate, Sodium percarbonate is chemically just an addition compound of Na2CO3 and Hydrogen peroxide.
Also, while Sodium carbonate and Sodium percarbonate (basically Na2CO3 and 3Na2CO3.2H2O2) are often listed as the main ingredients in typical chlorine
free bleach, an additive, TAED, which acts as a key activator (see, for example, https://en.m.wikipedia.org/wiki/OxiClean ) is not even listed on the label. TetraAcetylEthyleneDiamine is apparently commonly employed as a bleach
activator in many laundry products (see https://en.m.wikipedia.org/wiki/Tetraacetylethylenediamine ). TAED reacts with H2O2 in alkaline conditions (referred to as perhydrolysis)
creating, in part, Peracetic Acid. The latter PAA is actually preferred over sluggish H2O2 for bleaching. In other words, it is not the H2O2 as the
active bleaching agent, but PAA created in situ. So, other than possibly misleading implying that eco friendly hydrogen peroxide is the active agent,
it is, in reality, PAA, a probematic compound with associated health concerns (see Marquand, E. C.; et al. , 2007. "Asthma Caused by Peracetic
Acid-Hydrogen Peroxide Mixture". J. Occup. Health. 49 (2): 155–158.). Here is a MSDS on an actual PAA mix ( 76-61% water, PAA 20-35%, 3% Acetic acid
and 1% H2O2): https://www.google.com/url?sa=t&source=web&rct=j&... which is far from friendly but does eventually totally decompose into harmless O2,
CO2, H2O,...
As such anyone using a commercial percarbonate product should at least be aware of safety issues and that one is likely employing a Peracetic acid
mix.
Legally, I find it is interesting that one can list main ingredients and not actualy cite active agents. The warning labels on the product are
certainly ample and displayed in different languages, and should not be dismissed under the misconception that this is just a harmless washing soda
and H2O2 mix (that is, absent TAED, which it may approach under totally dry condtions) but apparently, in the presence of TAED, moisture (like in ones
lungs), water vapor or in water solutions, it may no longer be quite so friendly.
[Edited on 23-4-2017 by AJKOER] |
[Edited on 19-10-2019 by AJKOER]
|
|
clearly_not_atara
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2732
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
Hypochlorite is more damaging than H2O2 because it has a lower barrier to reaction (activation energy). OxiClean is H2O2 with some catalysts that
lower the activation energy, putting it between H2O2 and bleach.
But I don’t see why simply baking it in an oven at about 80 C wouldn’t work?
|
|
|