artemov
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 181
Registered: 22-8-2018
Member Is Offline
|
|
Diy PTFE Boiling Chips
Bought a cheap ptfe rod, intend to cut it to small pieces to use as boiling chips. Wondering if they would be effective. Can they be washed and
recycled for repeated use?
One thing I dun understand, ain't boiling chips supposed to be rough and porous? Ptfe is anything but, even those expensive ptfe boiling chips seem
fairly smooth
![](https://www.yodarubber.com/wp-content/uploads/2018/01/extruded-ptfe-rods-1.jpg)
|
|
Deathunter88
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 513
Registered: 20-2-2015
Location: Beijing, China
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by artemov ![](images/xpblue/lastpost.gif) | Bought a cheap ptfe rod, intend to cut it to small pieces to use as boiling chips. Wondering if they would be effective. Can they be washed and
recycled for repeated use?
One thing I dun understand, ain't boiling chips supposed to be rough and porous? Ptfe is anything but, even those expensive ptfe boiling chips seem
fairly smooth
![](https://www.yodarubber.com/wp-content/uploads/2018/01/extruded-ptfe-rods-1.jpg)
|
Yeah all PTFE seems to have an almost magical effect in being able to facilitate smooth boiling. Most stir bars are smooth yet they are a good
substitute for boiling chips.
|
|
markx
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 645
Registered: 7-8-2003
Location: Northern kingdom
Member Is Offline
Mood: Very Jolly
|
|
As far as I know solid PTFE parts are produced by pressing and sintering the virgin powder, so I guess at the microscopic level it is kind of uneven
and perhaps also somewhat porous on the surface. It is a very slippery substance so this gives the illusion of it being very uniform and smooth.
Also it is for practical purposes pretty much indestructible by chemical means (apart from interactions with molten alkalies or media that require
extremely high temperatures in excess of +300C), so yes, the chips can be washed and used indefinitely.
[Edited on 9-9-2019 by markx]
Exact science is a figment of imagination.......
|
|
fusso
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
But will the smaller oligomer molecules leach out during boiling solvents?
|
|
Deathunter88
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 513
Registered: 20-2-2015
Location: Beijing, China
Member Is Offline
Mood: No Mood
|
|
Probably wouldn't be too big a deal as I doubt tetrafluoroethane would be very reactive.
|
|
teodor
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 874
Registered: 28-6-2019
Location: Heerenveen
Member Is Offline
|
|
I never tried PTFE rods, only pieces of PTFE tapes. I can say PTFE tape is not as effective as porcelain chips (also it is not sitting on the bottom
but floating). I use porcelain chips made from a plate - I smashed a thick plate by a hammer. After boiling 85% H2SO4 and constant boiling point HBr
with them the glaze was totally dissolved, so I got a totally unglazed chips. They work very well - I forgot about bumping at all.
[Edited on 9-9-2019 by teodor]
|
|
happyfooddance
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 530
Registered: 9-11-2017
Location: Los Angeles, Ca.
Member Is Offline
Mood: No Mood
|
|
Silica gel kitty litter works great and is cheap.
PTFE might look smooth and porous; the naked eye is a poor judge of such properties, however. Silica gel (or aerogels for that matter) look like
perfectly smooth glass when carefully prepared, but air passes right throught them and they have more holes than they have solid space ![:o](./images/smilies/shocked.gif)
[Edited on 9-10-2019 by happyfooddance]
|
|