Elemental Phosphorus
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 184
Registered: 11-11-2016
Location: Is everything
Member Is Offline
Mood: No Mood
|
|
Nitration and acetone
About 2 years ago, I had an accident in which I mixed a small amount of fuming nitric acid and acetone inside a graduated cylinder. The mixture
quickly began bubbling and fuming, and within a few seconds, the contents of the cylinder were ejected onto my ceiling, leaving a nasty blotch. I had
wondered why this happened, so today I revisited it, adding acetone to a test tube containing fuming nitric acid. This time, it wasn't as violent
(maybe because I added acetone to RFNA, and last time I added RFNA to acetone) but the reaction was still vigorous, ejecting plenty of RFNA and
acetone from the test tube, after copious bubbling and production of nitrogen dioxide. Luckily, I worked outside this time. Anyhow, I was wondering if
anyone has some sort of insight into how this happens, I'd be interested to hear it. All over the internet, there are reports of injuries and
accidents involving acetone and nitric acid. So my question is: is the acetone being oxidized, or is it being nitrated? Is it oxidized directly to
carbon dioxide, water and nitrogen, or is there an intermediate?
Finally, I seem to recall that I heard some reference to nitric acid being able to convert acetone to a powerful and sensitive explosive. I thought I
saw that on this board. I plan to do a test in which I will attempt to see what product may be produced if I add very cold nitric acid to very cold
acetone under strong stirring, and then evaporate the solution. I'll try and post some pictures/videos of the acetone/nitric acid, and this test when
I get around to it. Anyway, any response or insight would be appreciated.
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3631
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Nitric acid plus acetone = formic acid plus acetic acid plus heat
if allowed to heat up then https://www.youtube.com/watch?v=uFwiZYfEsuY
Conc. nitric acid is very oxidising when hot, less so when cool (and/or diluted),
so reactions often start very slowly then suddenly run away.
(usually producing lots of NO2)
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
Pumukli
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 694
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
Isn't formic acid oxidized further immediately? (CO2, H2O, more heat)
|
|
Microtek
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 849
Registered: 23-9-2002
Member Is Offline
Mood: No Mood
|
|
According to US3491160A, acetone can be destructively nitrated to nitroform be fuming nitric acid. I have used this method myself from time to time.
|
|
Elemental Phosphorus
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 184
Registered: 11-11-2016
Location: Is everything
Member Is Offline
Mood: No Mood
|
|
Now THAT’S what I’m talking about. I’ll try it tomorrow. I’m just worried about an accident or runaway.
|
|
Microtek
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 849
Registered: 23-9-2002
Member Is Offline
Mood: No Mood
|
|
Just add the acetone gradually. The reaction is quite violent (I think I preheated the nitric acid when I did it, but it was quite some years ago, so
I'm not entirely certain), and I think I remember some alternate methods, possibly from other patents, which aimed to tame the reaction a little.
|
|
Yamato71
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 68
Registered: 8-2-2012
Member Is Offline
Mood: Resigned
|
|
I would think that nitric acid would initially go after the alpha carbons and oxidize the ketone to the gem diol. Once that happens, the diol
alcohols would undergo esterification, resulting in a mixture of nitromethane, nitroform and tetranitromethane. Very bad juju. I remember performing
this only once with 68% HNO3 and watching with fascination as the mixture went through several distinct color changes like a clock reaction before
spraying all over the fume hood.
|
|
Boffis
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1850
Registered: 1-5-2011
Member Is Offline
Mood: No Mood
|
|
The reaction of fuming nitric acid with organic materials is complex and the results very diverse. The results range from an instantaneous whoosh
( ) to some remarkable complex derivatives of such things as furoxan. The later
compounds are probably produced by the dimerisation of nitrile oxides (fulminic acid derivatives). Certainly one of the original routes into the
so-called fulminuric acids (C3N3H3O3 isomers) was via the oxidation of diethyl-acetonedicarboxylate or ethyl acetoacetate to furoxandicarboxylic acid
diethyl ester. From this latter compound a bewildering array of heterocyclics can be produced. Some years ago I did a great deal of work on the
fulminic and fulminuric acids and I hope hope someday to post it on SM but its a beast already and nowhere near complete. Having tried this route into
the fulminuric acid I can see why it was never popular! However, none of the other routes are easier or safer; large amounts of silver or mercury
fulminate + large amounts of sodium amalgam etc etc... you get the picture!
I am not sure whether acetone would give the simple furoxan (C2N2H2O2); by extension of the reactions above it ought to but furoxan is actually harder
to prepare than its derivatives (its usually prepared via the oxidation glyoxal dioxime) the the various patents mentioned above also suggest
otherwise.
|
|
Elemental Phosphorus
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 184
Registered: 11-11-2016
Location: Is everything
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Yamato71 ![](images/xpblue/lastpost.gif) | I would think that nitric acid would initially go after the alpha carbons and oxidize the ketone to the gem diol. Once that happens, the diol
alcohols would undergo esterification, resulting in a mixture of nitromethane, nitroform and tetranitromethane. Very bad juju. I remember performing
this only once with 68% HNO3 and watching with fascination as the mixture went through several distinct color changes like a clock reaction before
spraying all over the fume hood. |
This is interesting, I remember that I said I would try a reaction to produce nitroform and post the results, of course I never did, because I
chickened out of making nitroform, and reading your post that says that tetranitromethane may also be produced has made me glad I never did.
Tetranitromethane is just one of those compounds that I try and avoid. Interesting that you mention color changes, the only color change I noticed was
the pale yellow fuming nitric acid and the clear acetone turned immediately to an angry red color, almost like that of a solution of bromine in DCM.
Immediately there was bubbling which I assumed was the production of copious amounts of NO2 gas. Bad juju indeed.
Quote: Boffis:
The reaction of fuming nitric acid with organic materials is complex and the results very diverse. The results range from an instantaneous whoosh
( ) to some remarkable complex derivatives of such things as furoxan. The later
compounds are probably produced by the dimerisation of nitrile oxides (fulminic acid derivatives). Certainly one of the original routes into the
so-called fulminuric acids (C3N3H3O3 isomers) was via the oxidation of diethyl-acetonedicarboxylate or ethyl acetoacetate to furoxandicarboxylic acid
diethyl ester. From this latter compound a bewildering array of heterocyclics can be produced. Some years ago I did a great deal of work on the
fulminic and fulminuric acids and I hope hope someday to post it on SM but its a beast already and nowhere near complete. Having tried this route into
the fulminuric acid I can see why it was never popular! However, none of the other routes are easier or safer; large amounts of silver or mercury
fulminate + large amounts of sodium amalgam etc etc... you get the picture!
I am not sure whether acetone would give the simple furoxan (C2N2H2O2); by extension of the reactions above it ought to but furoxan is actually harder
to prepare than its derivatives (its usually prepared via the oxidation glyoxal dioxime) the the various patents mentioned above also suggest
otherwise.
[End Quote]
I do think that this is interesting, and I would love to someday read your research on fulminic and fulminuric acids. Maybe I will have to revisit
this experiment after all.
I have some videos of the reaction between acetone and the acid, and it really impressed me just how much NO2 is produced. I have tried to attach the
video and this is even after the reaction had slowed down just slightly, and there really is an impressive quantity of red fumes.
Edit: I seem to have messed up the quotes. Also, the file is low quality, maybe I can post it on a video site and put a link.
Attachment: Acetone-and-RFNA (615kB) This file has been downloaded 335 times
[Edited on 16-3-2021 by Elemental Phosphorus]
|
|
zed
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2281
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Mmmm..... The way I remember it, Formic Acid can abruptly decompose, in a rather ominous manner.
HCOOH, when you balance the equation of break down, doesn't equal CO2 + H2O.
HCOOH, breaks down to CO + H2O. I'm not sure how often that happens, but CO ain't compatible with lifeforms that utilize Hemoglobin.
https://en.wikipedia.org/wiki/Formic_acid
Catalyzed by Pt, you might get H2 + CO2
Catalyzed by H2SO4, you get H2O + CO
Sorry, but I was unable to read your file. My Mac doesn't understand the format.
[Edited on 18-3-2021 by zed]
[Edited on 18-3-2021 by zed]
|
|
njl
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 609
Registered: 26-11-2019
Location: under the sycamore tree
Member Is Offline
Mood: ambivalent
|
|
Formic acid does decompose to CO over time, or via dehydration with H2SO4. Pt, Pd, Ni, etc can all yield H2 and CO2 depending on conditions.
Reflux condenser?? I barely know her!
|
|
Elemental Phosphorus
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 184
Registered: 11-11-2016
Location: Is everything
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by zed ![](images/xpblue/lastpost.gif) | Mmmm..... The way I remember it, Formic Acid can abruptly decompose, in a rather ominous manner.
HCOOH, when you balance the equation of break down, doesn't equal CO2 + H2O.
HCOOH, breaks down to CO + H2O. I'm not sure how often that happens, but CO ain't compatible with lifeforms that utilize Hemoglobin.
https://en.wikipedia.org/wiki/Formic_acid
Catalyzed by Pt, you might get H2 + CO2
Catalyzed by H2SO4, you get H2O + CO
Sorry, but I was unable to read your file. My Mac doesn't understand the format.
[Edited on 18-3-2021 by zed]
[Edited on 18-3-2021 by zed] |
No worries about the file, it’s just a (low quality) video of the reaction in a test tube. I am aware that formic acid decomposes to CO and water,
but I did not see any evidence of the evolution of CO. Possibly it could be oxidized by another equivalent of nitric acid, but either way, I was
really just wondering about the reaction and why it was so violent, because usually nitric acid does not react so vigorously with organic compounds at
room temperature, except maybe nitrogen-containing compounds or alkenes. I was really just curious, that’s all, and while Boffis had interesting
insight I think I’ll stick to nitric acid oxidations that don’t produce highly toxic or explosive compounds.
|
|
Diachrynic
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 222
Registered: 23-9-2017
Location: western spiral arm of the galaxy
Member Is Offline
Mood: zenosyne
|
|
Rename it and append .mp4 and it will play. The file extension just got lost.
As per the reaction, the following paper gives some insight into it. The end product seems to be carbon dioxide and minor amounts of acetic acid.
Rubtsov, Y. I., Kazakov, A. I., Sorokina, T. V., & Manelis, G. B. (2008). Critical phenomena in acetone oxidation by nitric acid. Russian Chemical
Bulletin, 57(10), 2065–2071. doi:10.1007/s11172-008-0280-8
Attachment: rubtsov2008.pdf (309kB) This file has been downloaded 385 times
[Edited on 18-3-2021 by Diachrynic]
we apologize for the inconvenience
|
|