geffmov
Harmless
Posts: 5
Registered: 22-1-2019
Member Is Offline
|
|
production of hydrochloric acid via 'underwater fireworks'
In the synthesis of hydrogen chloride, chlorine gas and hydrogen gas when mixed and exposed to sunlight or UV light react to produce hcl(g)
I assume a DIY combustion chamber to collect the formed hcl is unworkable.
I wanted to know as i cant find any information on this, what if the hydrogen and chlorine gases was mixed and bubbled through a solution of
water/hydrochloric acid while been exposed to strong UV light?
I was wondering if theyd still react and form hcl underwater, once the solutions saturated the water would be fuming hydrochloric acid and changed?
The nearest reaction i could find is acetylene and chlorine 'underwater fireworks'
https://youtu.be/1Y5aCSOSQgU
Im looking for a total synthesis for either hydrochloric acid ( which i dont think there is whats practical) WITHOUT needing sulfuric acid,
Or a synthesis of sulfuric acid what doesnt consume hydrochloric acid, as with plenty of sulfuric acid getting hydrochloric acid is easy.
many thanks
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1640
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
My very first throw at making a chemical plant was a chloro-alkalie cell, at the time I needed sodium hydroxide, but what to do with the H2 and Cl2?
well I learned they'd burn to make HCl.
So using a very big jar, some check valves and larg needles (16gauge) and a bbq sparker I set off. drilled the bottom to put the needles in, hooked up
the bbq sparker and lead the exhaust into a 5g bucket of tap water. Much to the amusement of adults it worked.
So you can simply burn it to make HCl, and generate sodium hydroxide while at it.
the design did eventually grow to a much safer and fine tunable system, but at the core it was the same thing as described.
Just do not smell the tube to see if it is working!
|
|
rockyit98
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 283
Registered: 12-4-2019
Location: The Known Universe
Member Is Offline
Mood: no mood is a good mood
|
|
You dont have to mix H2 and Cl2
Cl2 + H2O <------> HCl + HOCl
but under UV light
Cl2(aq) + H2O ---(UV)---> HCl(aq) + O2(g)
this prevent explosions
|
|
Ubya
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
any reference for that?
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
wg48temp9
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 774
Registered: 30-12-2018
Location: not so United Kingdom
Member Is Offline
|
|
The OP should look at this video of hydrogen burning in chlorine.:
https://www.youtube.com/watch?v=MtygiCwnEzw
or and search using "hydrogen burning in chlorine"
I am wg48 but not on my usual pc hence the temp handle.
Thank goodness for Fleming and the fungi.
Old codger' lives matters, wear a mask and help save them.
Be aware of demagoguery, keep your frontal lobes fully engaged.
I don't know who invented mRNA vaccines but they should get a fancy medal and I hope they made a shed load of money from it.
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
Per a prior comment:
where I would rapidly remove the CuO presence from the starting cold hypochlorous acid to limit cupric creation.
With respect to the required cupric oxide, a path to CuO per one of my prior threads at https://www.sciencemadness.org/whisper/viewthread.php?tid=84... .
Also, a path to HOCl from the action of CO2 gas (from say vinegar acting on baking soda) acting on a mix of chlorine bleach (say 6% NaOCl) and DampRid
(dry CaCl2) via the reactions:
CaCl2 + 2 NaOCl <--> Ca(OCl)2 + 2 NaCl
H2CO3 + Ca(OCl)2 --> CaCO3 (s) + 2 HOCl
Distilling half the mix, due to the volatile nature of the hypochlorous acid, brings over largely all the HOCl/Cl2O, so 6% is now around 10% HOCl.
Source, see Watts' Dictionary of Chemistry, Volume 2, page 16, the concentration of Hypochlorous Acid on a single distillation can be nearly doubled,
to quote from Watts:
"A dilute solution of HClO may be distilled with partial decomposition, the distillate is richer in HClO; Gay-Lussao found that, on distilling a
dilute solution to one-half, the distillate contained five-sixths of the total HClO (C. R. 14, 927)"
Repeat again to further concentrate but do not (for safety reasons relating to decomposition) bring the concentration of hypochlorous acid over say
20%.
Note, as requested, no employment of any strong acid to create an acid, and interestingly, the presence of the divalent salt CuCl2 in the acid mix,
actually increases the activity coefficient of the acid solution!
-----------------------------
Burning H2 in Cl2 is an actual commercial process to very high purity HCl. However, for most it is an expensive and problematic path.
------------------------------
If you view any of the online videos on the explosion of H2/Cl2 mixtures, it should be apparent that it is far too energetic path to HCl.
[Edited on 14-7-2019 by AJKOER]
|
|
rockyit98
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 283
Registered: 12-4-2019
Location: The Known Universe
Member Is Offline
Mood: no mood is a good mood
|
|
https://www.quora.com/How-does-chlorine-react-with-water
http://www.sciencemadness.org/talk/viewthread.php?tid=13828
|
|
geffmov
Harmless
Posts: 5
Registered: 22-1-2019
Member Is Offline
|
|
Thankyou very much all for the replies. I didnt know the hydrogen flame could simply burn in the chlorine, i thought it detonated.
The safety issue about the flame, to keep it reliably lit do you think a mantle like out of a tilly lamp can be employed as a burner? or would whats
in a tilly mantle negatively react causing sidereactions.
Employing something like a mantle if it worked would give much more stable control over how fast the gases was fed through. I think initially the
mantle contains metal oxides which may get burnt off once the mantles in place and first used.
"The mantles are a ceramic mesh that encase the flame produced by the lantern. Typical mantles look like this: Mantles start out as silk fabric sacks
impregnated with different oxides. The standard for decades has been the Welsbach mantle, which uses a mixture of thorium oxide, cerium oxide and
magnesium oxide."
If mantles could be used thered be so much more control over production and still keep the apparatus compact.
I have followed up other suggestions made too, its just i was going to make a chloroalkali cell anyway so the byproducts if i could make hydrochloric
acid this way would be the most convenient.
Im also looking into suitable diaphragms and membranes for chloroalkali cell. Ive come across some teflon membranes very cheap are these suitable
for such a cell? https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.eb...
Also would they be suitable in electrolysis cells to keep anode/cathode free of slimes from each other?
Im not sure if the fact theyre 'hydrophobic' actually becomes a barrier for ion exchange.
[Edited on 21-7-2019 by geffmov]
|
|
geffmov
Harmless
Posts: 5
Registered: 22-1-2019
Member Is Offline
|
|
Quote: Originally posted by XeonTheMGPony ![](images/xpblue/lastpost.gif) | My very first throw at making a chemical plant was a chloro-alkalie cell, at the time I needed sodium hydroxide, but what to do with the H2 and Cl2?
well I learned they'd burn to make HCl.
So using a very big jar, some check valves and larg needles (16gauge) and a bbq sparker I set off. drilled the bottom to put the needles in, hooked up
the bbq sparker and lead the exhaust into a 5g bucket of tap water. Much to the amusement of adults it worked.
So you can simply burn it to make HCl, and generate sodium hydroxide while at it.
the design did eventually grow to a much safer and fine tunable system, but at the core it was the same thing as described.
Just do not smell the tube to see if it is working! |
I would be immensely grateful if you would share more details of your later experimentation and setup?
In particular your chlorine chamber with hydrogen flame.
Id like to build a cell capable of producing say a couple of kg per day of 36% hydrochloric acid, or more.
Im not sure yet in my imagination what a practical build would be. Sometimes i overcomplicate things.
Im trying to visualise the combustion chamber. I am assuming it must really be either borosilicate or graphite due to nature of the reagents, and heat
generated in the reaction . The example industrially i saw was graphite.
Possibility of chlorine detonation by light leads me away from using glass... but Ive the thought of a large 10-15l rbf upturned, partially filled
with constantly pumped water to catch the hcl and dissapate heat as the gases then run through a bubbler system.
Running the hydrogen and chlorine inside isnt problematic in itself.
Ive not yet looked into a reliable spark source.
My other thought was a graphite crucible one used in furnaces, upturned and sealed by been sat in water. Even possibly totally immersed in water in a
large bucket 20l lid sealed on with a bubbler to allow waste gas escape, or in the case of chlorine il bubble it through naoh, naocl always comes in
handy as a chlorinator.
I cant find any DIY examples online to go from, usually theres a selection and its possible to select and build upon others great ideas. This ones
very vague.
And id love to know about the diaphragm/membrane i mentioned in previous comment if itd be suitable for the chloroalkali cell.
If members know of good literature in electrolysis cells, different builds and types of cell, particularly chloroalkali, sulfuric acid
regeneration-production please point the way, this isnt my usual area but i learn fast.
thanks a lot guys for the replies, this is something i am in process of gathering materials to build
|
|