reactofurnace
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 76
Registered: 17-7-2015
Member Is Offline
Mood: Volatile
|
|
Diacetone alcohol synthesis
Guys i'm going to attempt the condensation reaction of acetone to give diacetone alcohol. The procedures i've read calls for a soxhlet extractor with
a barium hydroxide catalyst under reflux.
I do not have a soxhlet extractor so i was wondering if it is possible to conduct the reaction without it by just placing the barium hydroxide
directly into the reaction flask and letting it reflux.
Would this work? What yield should I expect?
The article on the synthesis: http://www.prepchem.com/synthesis-of-diacetone-alcohol/
|
|
bobm4360
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 59
Registered: 18-4-2011
Location: On a wretched little island.
Member Is Offline
Mood: No Mood
|
|
Slightly different procedure, but much better notes and background:
OrgSyn
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Quote: Originally posted by reactofurnace ![](images/xpblue/lastpost.gif) | i was wondering if it is possible to conduct the reaction without it by just placing the barium hydroxide directly into the reaction flask and letting
it reflux.
Would this work? |
Not very well. Think carefully about equilibrium and vapor pressure of the reactants vs. products, and you'll see why they put the catalyst in the
extractor and not the main reaction flask.
edit: if you're stumped, an explanation is in note 5 of the OrgSyn procedure
[Edited on 2019-7-1 by Metacelsus]
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3027
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
I can imaging you could make some sort of improvised soxhlet by hanging a tea bag filled with BaOH in a reflux column, might be inefficient but also
might work, refluxing acetone shouldn't cost too much energy anyway.
Edit: maybe hanging the teabag below the condensor but above the liquid would work, as the temperature is probably a bit higher there it would react a
bit faster compared to the soxhlet, which does a cold "extraction".
[Edited on 1-7-2019 by Tsjerk]
|
|
VSEPR_VOID
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 719
Registered: 1-9-2017
Member Is Offline
Mood: Fullerenes
|
|
It is an equilibrium process I think, so you need to keep diaacetone alcohol off of the barium hydroxide. This is why a soxhlet is used. The more
volatile acetone boils off and is sent to the catalyst, well the product stays in the boiling flask.
I attempted doing this using a separator funnel and reflux condenser, the ghetto method, for 20 hours of reflux, but with no success. I think you
really need to do this for a hundred hours at least. Make sure to use a condenser with a high efficiency and to regularly top off the reaction
solution with fresh acetone.
Within cells interlinked
Within cells interlinked
Within cells interlinked
|
|
reactofurnace
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 76
Registered: 17-7-2015
Member Is Offline
Mood: Volatile
|
|
Quote: Originally posted by VSEPR_VOID ![](images/xpblue/lastpost.gif) | It is an equilibrium process I think, so you need to keep diaacetone alcohol off of the barium hydroxide. This is why a soxhlet is used. The more
volatile acetone boils off and is sent to the catalyst, well the product stays in the boiling flask.
I attempted doing this using a separator funnel and reflux condenser, the ghetto method, for 20 hours of reflux, but with no success. I think you
really need to do this for a hundred hours at least. Make sure to use a condenser with a high efficiency and to regularly top off the reaction
solution with fresh acetone. |
20 hours and no success!! wow that must have been a real bummer. Yes , perhaps this reaction needed to be conducted for long periods.
Were your reagents dried?
[Edited on 2-7-2019 by reactofurnace]
|
|