fishfrys
Harmless
Posts: 2
Registered: 22-6-2019
Member Is Offline
|
|
Failure to make Chloroform - help
When I try to make the chloroform, after adding the acetone to the bleach carefully and wait all I have is a cloudy mixture with no chloroform at the
bottom, the container becomes warm so clearly, a reaction occurs. Could any of these ingredients in the bleach interfere with the reaction?
Non-ionic surfactants
Anionic sufactants
Perfume
Limonene
thanks
[Edited on 22-6-2019 by fishfrys]
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3647
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Chloroform is soluble in water ! (about 10 g/litre)
so you need to either;
. distill-off the chloroform (I've not tried due to fear)
. use a more concentrated bleach solution. (with good cooling and patience)
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
wakatutu
Harmless
Posts: 31
Registered: 23-2-2017
Member Is Offline
Mood: Mostly Harmless
|
|
The process I've employed is generally to first make a bleach slushy - you pour off enough bleach from the gallon bottle to leave room for the liquid
to expand as it freezes, then put it in a freezer for about 24 hours.
Then, you add a stoichiometric amount of acetone for the concentration of your bleach (it's not hard to figure out, just calculate how many moles of
NaOCl you have in your liquid and add 1/3rd the amount of moles of acetone. I usually do it all at once, then give it a vigorous shaking, and leave
it in the freezer with the cap loose to prevent pressure buildup for another 24 hours.
At this point, the aqueous layer is completely transparent and colorless, and the organic layer is readily accessed. I would definitely recommend
distilling it afterward because there will be some things in there that are not chloroform.
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Quote: Originally posted by fishfrys ![](images/xpblue/lastpost.gif) | When I try to make the chloroform, after adding the acetone to the bleach carefully and wait all I have is a cloudy mixture with no chloroform at the
bottom, the container becomes warm so clearly, a reaction occurs. Could any of these ingredients in the bleach interfere with the reaction?
Non-ionic surfactants
Anionic sufactants
Perfume
Limonene
|
Yeah, the surfactants will definitely mess it up. Distillation is your only option, but watch out for foam. You might just want to start over with
pure bleach.
|
|
draculic acid69
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1371
Registered: 2-8-2018
Member Is Offline
|
|
Bottled bleach is fine for tiny amounts of chloroform but if you want a decent amount
(More than 20ml) you need to switch to 10% pool chlorine and if you want more than a cup start with calcium hypochlorite.usually the cheapest no
name brand of bleach is the best as it has no additives
[Edited on 23-6-2019 by draculic acid69]
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3647
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
I have successfully used 35% sodium hypochlorite to make a small quantity of chloroform,
what is the (relative) benefit of using calcium hypochlorite ?
EDIT: the hypochlorite solution was not 35%, more like 14% to 15% ...
[Edited on 23-6-2019 by Sulaiman]
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
fusso
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
is 35% Na hypochlorite really a thing?
|
|
Boffis
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1851
Registered: 1-5-2011
Member Is Offline
Mood: No Mood
|
|
If your bleach is dilute (less than 10%) try adding salt to the reaction mixture to reduce the solubility of chloroform in water. Also remember that
commercial bleach contains excess NaOH which will hydrolyse the chloroform if the mixture becomes too hot.
[Edited on 23-6-2019 by Boffis]
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3647
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Probably not ![:(](./images/smilies/sad.gif)
Sorry, I had a brain fart,
I just checked and what I used was
"Sodium hypochlorite, 14%-15% chlorine eq."
Well caught !
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1640
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
Dairy uses 22% solution, so try looking at some industrial cleaner suppliers or local agricultural suppliers
|
|
Ubya
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
the surfactants clearly are the culprit. use bleach with no additives, and the more concentrated is the bleach the better
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
Swinfi2
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 131
Registered: 19-2-2018
Location: England
Member Is Offline
Mood: Catalytic
|
|
Tried this with the cheapest bleach available in asda (england) and all I got was cloudy gelatinous... Not chloroform. How best to dispose of
chlorinated waste?
I'm thinking of making a hypochlorite/chlorate cell to make some relatively concentrated hypochlorite and start there but I need to get a regulated
power supply first. Every electrochemical experiment f**ks up on me and eats the electrodes...
|
|
draculic acid69
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1371
Registered: 2-8-2018
Member Is Offline
|
|
The reason for using caocl is price and concentration.bleach is 5%naocl isn't it and pool chlorine is 10%naocl,with caocl it can be more
concentrated.ive never seen naocl at more than 10-11% .
|
|
Ubya
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
add a sodium hydroxide solution to the chloroform emulsion/solution, let it react for as long as possible (a fee days?) then you can drain it in the
sink (the end products should be formate and chloride)
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
Keras
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 856
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
Quote: Originally posted by Ubya ![](images/xpblue/lastpost.gif) |
add a sodium hydroxide solution to the chloroform emulsion/solution, let it react for as long as possible (a fee days?) then you can drain it in the
sink (the end products should be formate and chloride) |
Can’t you treat the waste with hydrogen peroxide? It should oxidise the Cl- ion into free Cl2 and after a few hours you can safely dispose of the
rest?
[Edited on 24-6-2019 by Keras]
|
|
Ubya
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
Quote: Originally posted by Keras ![](images/xpblue/lastpost.gif) | Quote: Originally posted by Ubya ![](images/xpblue/lastpost.gif) |
add a sodium hydroxide solution to the chloroform emulsion/solution, let it react for as long as possible (a few days?) then you can drain it in the
sink (the end products should be formate and chloride) |
Can’t you treat the waste with hydrogen peroxide. It should oxidise the Cl- ion into free Cl2 and after a few hours you can safely dispose of the
rest? |
Only at really low ph chloride is oxidized by concentrated hydrogen peroxide, in basic solution nothing happens. Plus, chlorides are not a concern,
why bothering to make nasty Cl2 gas to remove them?
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
Keras
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 856
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
I was just attempting to suggest something in the vein of Fenton's reagent. But you may well be right.
Buon pomeriggio nel caput mundi!
|
|