Wrecking Bereserker
Harmless
Posts: 25
Registered: 2-4-2019
Member Is Offline
|
|
Alkynyl Magnesium Halide:Grignard's reagent
Is Alkynyl Magnesium Halide a Grignard's reagent?
I mean something like ethynyl magnesium halide
If so can we use it to prepare an alkyne?rather than using Alkyl Halides
|
|
|
Pumukli
National Hazard
Posts: 705
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
Yes, it is a Grignard.
We can prepare an alkyne from it, yes.
"rather than using Alkyl Halides"
It is a bit hard for me to understand.
Do you think of the alkyl halide -> alkene -> vic. alkyl halide -> alkyne route?
Anyway, you would need an alkyne halide at first to make that alkyne Grignard. But how could you get to the alkyne halide? Wouldn't it be easier to
get to the alkyne through a different approach?
What is the target compound, if not something top secret?
[Edited on 9-6-2019 by Pumukli]
|
|
|
Wrecking Bereserker
Harmless
Posts: 25
Registered: 2-4-2019
Member Is Offline
|
|
Yeah i meant the vic.alkyl halide method
Nothing top secret
I was just wondering because we usually mention alkyl magnesium halide as grignard but not the alkynyl magnesium halide.
Thanks for the reply!
|
|
|
DraconicAcid
International Hazard
Posts: 4333
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Alkynyl magnesium halides aren't generally used as Grignard reagents because 1-haloalkynes aren't stable, so RCCBr + Mg --> RCCMgBr isn't feasible.
You could make them using a terminal alkyne plus a regular Grignard, though....RCCH + R'MgBr --> RCCMgBr + R'H. But it's just as easy to use an
alkyllithium to deprotonate the terminal alkyne.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
fusso
International Hazard
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
Why is 1 haloalkyne unstable? What will it turn into?
|
|
|
DraconicAcid
International Hazard
Posts: 4333
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Read the second sentence of this paper:
https://pubs.acs.org/doi/abs/10.1021/jo00824a003
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Quote: Originally posted by DraconicAcid  | | Alkynyl magnesium halides aren't generally used as Grignard reagents because 1-haloalkynes aren't stable, so RCCBr + Mg --> RCCMgBr isn't feasible.
You could make them using a terminal alkyne plus a regular Grignard, though....RCCH + R'MgBr --> RCCMgBr + R'H. But it's just as easy to use an
alkyllithium to deprotonate the terminal alkyne. |
In my old lab at the University of Minnesota, we regularly used ethynylmagnesium bromide, which is commercially available (you can buy it from
Sigma-Aldrich). It's produced by reaction of acetylene with ethylmagnesium bromide.
However, that was the only alkynyl Grignard we used. For all other alkynes, we lithiated them with nBuLi, but doing this with acetylene would have
been a bit tricky.
Also, 1-bromoalkynes in general are definitely stable. I've made quite a few (by bromination of an alkyne with NBS and catalytic silver salt in the
dark). Haloacetylenes are the problem. (However, bromo(trimethylsilyl)acetylene can usually be substituted, followed by deprotection.)
[Edited on 2019-6-10 by Metacelsus]
|
|
|
DraconicAcid
International Hazard
Posts: 4333
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
| Quote: Originally posted by Metacelsus | | Quote: Originally posted by DraconicAcid | | Alkynyl magnesium halides aren't generally used as Grignard reagents because 1-haloalkynes aren't stable, so RCCBr + Mg --> RCCMgBr isn't feasible.
You could make them using a terminal alkyne plus a regular Grignard, though....RCCH + R'MgBr --> RCCMgBr + R'H. But it's just as easy to use an
alkyllithium to deprotonate the terminal alkyne. |
In my old lab at the University of Minnesota, we regularly used ethynylmagnesium bromide, which is commercially available (you can buy it from
Sigma-Aldrich). It's produced by reaction of acetylene with ethylmagnesium bromide.
However, that was the only alkynyl Grignard we used. For all other alkynes, we lithiated them with nBuLi, but doing this with acetylene would have
been a bit tricky.
Also, 1-bromoalkynes in general are definitely stable. I've made quite a few (by bromination of an alkyne with NBS and catalytic silver salt in the
dark). Haloacetylenes are the problem. (However, bromo(trimethylsilyl)acetylene can usually be substituted, followed by deprotection.)
[Edited on 2019-6-10 by Metacelsus] |
Thanks for the correction. I thought they were unstable as a large group.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
AlteredState
Harmless
Posts: 1
Registered: 22-6-2019
Member Is Offline
|
|
| Quote: Originally posted by Metacelsus | | Quote: Originally posted by DraconicAcid | | Alkynyl magnesium halides aren't generally used as Grignard reagents because 1-haloalkynes aren't stable, so RCCBr + Mg --> RCCMgBr isn't feasible.
You could make them using a terminal alkyne plus a regular Grignard, though....RCCH + R'MgBr --> RCCMgBr + R'H. But it's just as easy to use an
alkyllithium to deprotonate the terminal alkyne. |
In my old lab at the University of Minnesota, we regularly used ethynylmagnesium bromide, which is commercially available (you can buy it from
Sigma-Aldrich). It's produced by reaction of acetylene with ethylmagnesium bromide.
However, that was the only alkynyl Grignard we used. For all other alkynes, we lithiated them with nBuLi, but doing this with acetylene would have
been a bit tricky.
Also, 1-bromoalkynes in general are definitely stable. I've made quite a few (by bromination of an alkyne with NBS and catalytic silver salt in the
dark). Haloacetylenes are the problem. (However, bromo(trimethylsilyl)acetylene can usually be substituted, followed by deprotection.)
[Edited on 2019-6-10 by Metacelsus] |
Working with acetylene sucks, but you can always substitute it for TMS-acetylene, which is not a gas. But yeah, if you're already going to buy a
grignard, you might as well buy directly the HCCMgX.
From Latest Research Highlights To Home Chemistry Experiments at Chemistry Hall
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
