Boffis
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1851
Registered: 1-5-2011
Member Is Offline
Mood: No Mood
|
|
Recovering iodine from copper I iodide
I Recovered some rather impure copper I iodide from a series of experiments I did on converting dicyandiamide into biguanide. These basically involved
heating dicyandiamide with an ammonium halide or other salt. Most salts give a fairly consistent yield of about 15-20% but ammonium bromide and iodide
are supposed to give yields of 30 and 50% respectively. However, the biguanide is precipitated as its copper complex but there is a tendency for the
iodide salts to complicate this precipitation procedure and I was left with a small amount (about 20g) of copper I iodide as a result.
Does anyone have any suggestion as to how best to recover the iodine either as the free element or as an alkali iodide? I was wondering if I could
oxidize the CuI suspended in say 2M sulphuric acid with a layer of DCM or similar to collect the iodine (incase the Cu+ salt doesn't dissolve so the
iodine cant be seperated by filtration).
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1227
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
Maybe HNO3 or acidified H2O2?
|
|
Boffis
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1851
Registered: 1-5-2011
Member Is Offline
Mood: No Mood
|
|
Hi Bedlasky, I thought about nitric acid but I think it will require heating and thus risk vapourizing some of the iodine or, if stronger nitric acid
is used, oxidize it to iodic acid. While the latter is not necessarily a problem if I could separate it from the copper nitrate without it forming
some sparingly soluble copper hydrogen iodate type salt that would require more nitric acid (precious stuff now!).
Another idea I had was to fuse it with sodium hydroxide to give sodium iodide, copper oxide and water.
|
|
Ubya
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
why not adding sulphuric acid and evaporate/sublime the formed iodine to purify it all in one step?
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
Boffis
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1851
Registered: 1-5-2011
Member Is Offline
Mood: No Mood
|
|
@UBya; Because in strongly acidic environments Cu+ act like a reducing agent so I can most of the iodine coming off as HI unless I use conc acid when
I will get SO2 etc as well. Messy
|
|
Ubya
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
Fusion with NaOH seems messy as well, easy and clean doesn't seem doable
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
wg48temp9
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 774
Registered: 30-12-2018
Location: not so United Kingdom
Member Is Offline
|
|
Dissolve the CuI by complexing it with an alkali iodide or ammonia. You can then probably reduce the Cu+ to metal with zinc dust. Then extract the
iodide as iodine or add alkali hydroxide then filter off the zinc hydroxide and you have a solution of alkali iodide.
The CuI can also be complexed with hexamine to form an interesting strongly fluorescent compound.
PS Can anyone tell me what causes the strong color of some transition metal iodides? The only thing I can find is that some are semiconductors,
perhaps its a bandgap effect.
[Edited on 12-5-2019 by wg48temp9]
I am wg48 but not on my usual pc hence the temp handle.
Thank goodness for Fleming and the fungi.
Old codger' lives matters, wear a mask and help save them.
Be aware of demagoguery, keep your frontal lobes fully engaged.
I don't know who invented mRNA vaccines but they should get a fancy medal and I hope they made a shed load of money from it.
|
|
Bedlasky
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1227
Registered: 15-4-2019
Location: Period 5, group 6
Member Is Offline
Mood: Volatile
|
|
Better is precipitate zinc with sodium carbonate or bicarbonate - excess of hydroxide dissolves zinc hydroxide.
Quote: Originally posted by wg48temp9 ![](images/xpblue/lastpost.gif) | PS Can anyone tell me what causes the strong color of some transition metal iodides? The only thing I can find is that some are semiconductors,
perhaps its a bandgap effect. |
Which iodides exactly do you mean? Most of the coloured iodides are salts containing soft Lewis acid and soft Lewis base.
[Edited on 12-5-2019 by Bedlasky]
|
|
CobaltChloride
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 239
Registered: 3-3-2018
Location: Romania
Member Is Offline
|
|
Quote: Originally posted by wg48temp9 ![](images/xpblue/lastpost.gif) |
The CuI can also be complexed with hexamine to form an interesting strongly fluorescent compound.
[Edited on 12-5-2019 by wg48temp9] |
Huh, I didn't know hexamine made any interesting complexes. Do you have a reference on this complex? I'd be interested in reading more about it.
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5111
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by wg48temp9 ![](images/xpblue/lastpost.gif) |
The CuI can also be complexed with hexamine to form an interesting strongly fluorescent compound.
PS Can anyone tell me what causes the strong color of some transition metal iodides? The only thing I can find is that some are semiconductors,
perhaps its a bandgap effect.
[Edited on 12-5-2019 by wg48temp9] |
https://en.wikipedia.org/wiki/Charge-transfer_complex#Trend_...
I found this
https://www.sciencedirect.com/science/article/pii/0022190270...
which confirms that hexamine (one "m") complexes exist.
But I wonder if there may be confusion with hexammine (two "m"s) complexes.
|
|
wg48temp9
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 774
Registered: 30-12-2018
Location: not so United Kingdom
Member Is Offline
|
|
Below is a copy of the note describing the fluorescent copper(I) iodide hexamine (Hexamethylenetetramine) complex.
Attachment: hexamine-complexes-copper-iodide-hardt1975.pdf (412kB) This file has been downloaded 349 times
I am wg48 but not on my usual pc hence the temp handle.
Thank goodness for Fleming and the fungi.
Old codger' lives matters, wear a mask and help save them.
Be aware of demagoguery, keep your frontal lobes fully engaged.
I don't know who invented mRNA vaccines but they should get a fancy medal and I hope they made a shed load of money from it.
|
|
Boffis
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1851
Registered: 1-5-2011
Member Is Offline
Mood: No Mood
|
|
I have found that is the cuprous iodide is finely ground and suspended in fairly strong (battery acid c 30%) sulphuric acid and hydrogen peroxide is
added (30%) iodine is slowly liberated as a solid. I am waiting to see if all of the iodide dissolves, if so I will filter of the ppt of iodine. If
not then....
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
A definite simple path (see first page citing free Iodine and H2O2 at https://pubs.acs.org/doi/10.1021/j100266a038), apply sonolysis (SN) to the acidified aqueous iodide in dilute H2O2 (or pumped in air, see also
'Free radical formation from sonolysis of water in the presence of different gases' by Masahiro Kohno, et al, https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3171683/). In the case of CuI, add NH3 first to complex, then add O2/H2O2 with acid, say HI. This
results in an aquaammine cupric salt: [Cu(NH3)k(H2O)(6-k)]I2, where k depends on NH3 concentration employed.
The underlying sonolysis reaction is:
H2O + SN --> H• + OH•
And, per chemistry below both of these radicals react with H2O2 to form, in steps at pH < 4.88, the hydroperoxyl radical (HO2•). The latter
radical eventually, is reported with sonolysis to result in the liberation of free iodine (with the likely not so simple chemistry noted below) and
even some H2O2 creation per cited reference.
-----------------------------------------------------------------
No sonolysis available, try using a microwave acting on graphite rods (like used in pencils) on H2O2 with an acidified aqueous iodide.
Based on this related work with free bromine formation (and not complexed), see 'Hydroperoxyl radical (HO2•) oxidizes dibromide radical anion
(•Br2−) to bromine (Br2) in aqueous solution: Implications for the formation of Br2 in the marine boundary layer', see the work by Brendan M.
Matthew, et al, fully available (for free) at: https://agupubs.onlinelibrary.wiley.com/doi/full/10.1029/200... , one probably needs something like HO2• to remove the likely persistent I2•-
radical.
Assuming the iodine chemistry is in line bromine chemistry (see https://pubs.acs.org/doi/10.1021/j100398a045), we want hydroxyl radicals (OH•) and therefrom perhydroxyl radical (HO2• ) in acidic conditions,
producing the following reaction system interacting with bromide (or, in the current case, iodide) and H2O2 per the cited reference reaction system:
Br- + OH• --> BrOH•-
BrOH•- --> Br- + OH• (the reversible reaction of above)
BrOH•- + H+ --> Br• + H2O
OH• + H2O2 --> H2O + HO2•
Br• + Br• --> Br2
Br• + Br- --> Br2•-
Br2•- + Br2•- --> 2 Br- + Br2
Br2•- + HO2• --> Br2 + HO2-
And apparently concurrently with the above:
Br2•- + HO2• --> 2 Br- + O2 + H+
H+ + HO2- = H2O2
Now, as to best path to HO2•, based on my recent experiments, I recommend the action of the microwave (MV) on carbon (as graphite rods, and not
activated charcoal which absorbs iodine), which may form surface zones containing a deficiency and excess of electrons:
C(surface) + MV → C(+) + e-
which together with an acid source of H+ and H2O2, may produce a one electron reduction of the hydrogen peroxide, as follows:
In the cathodic Zone:
H2O2 ⇌ H+ + HO2-
e- + H+ = H•
followed by an attack on the H2O2 leading to radical formations (see http://www.ipb.pt/~htgomes/FCT110088-%5B2%5D.pdf equations (3) and (4), in particular).
My take is as follows:
H• + HO2- = OH- + OH•
OH• + H2O2 ---> HO2• + H2O (see https://pubs.acs.org/doi/abs/10.1021/jp100204z )
resulting in the required HO2•, which in the presence of an acidified aqueous iodide salt, say KI, may result in the liberation of free I2 and not
some iodine complex.
I do not recommend the use of H2SO4, as it effectively scavenges the OH• to create sulfate radicals:
OH• + HSO4- = •SO4- + H2O
[Edited on 24-6-2019 by AJKOER]
|
|