Nate
Harmless
Posts: 43
Registered: 2-3-2018
Member Is Offline
Mood: No Mood
|
|
Trying my hand at genetically modifying plants
Hey again! So, as a side project other than school I became more and more fascinated with plants. I also love the idea of changing a plant's color
through GMO. Literally 5 minutes ago I learnt that hydrangea's can change color depending on soil pH. I was wondering how I could do this, would I use
a base plasmid and use gibson assembly to insert the DNA for the dye? I also can't seem to find the gene for the dye, if you could help me look for
this that would be great.
Thanks in advanced!
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
I don't know which one you need to target, but remember there is probably more than one copy.
|
|
Nate
Harmless
Posts: 43
Registered: 2-3-2018
Member Is Offline
Mood: No Mood
|
|
Yeah, probably right. I need to find out which ones though.
|
|
mayko
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1218
Registered: 17-1-2013
Location: Carrboro, NC
Member Is Offline
Mood: anomalous (Euclid class)
|
|
hydrangea pigments are anthocyanins; this looks like a good place to start on their molecular biology (it includes a section on changing petunia
colors via genetic engineering).
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC160913/
al-khemie is not a terrorist organization
"Chemicals, chemicals... I need chemicals!" - George Hayduke
"Wubbalubba dub-dub!" - Rick Sanchez
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
If you want to make white flowers, using RNA interference would be a relatively easy way to suppress the pigment-producing genes. See for example: https://www.ncbi.nlm.nih.gov/pubmed/18369790
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
Probably a good way to go, maybe you can design your RNAi to target a domain specific to your protein
|
|
Nate
Harmless
Posts: 43
Registered: 2-3-2018
Member Is Offline
Mood: No Mood
|
|
I don't want to make white flowers, I want to take the pigment gene and put it inside of another plant.
[Edited on 24-2-2019 by Nate]
|
|
Nate
Harmless
Posts: 43
Registered: 2-3-2018
Member Is Offline
Mood: No Mood
|
|
I found the pigment! I have yet to find the gene for it but I have learned the name of the pigment. As stated before it's a pH-dependent pigment, it's
not a protein like I thought. The compound's name is delphinidin-3- glucoside. I'll continue to look for the gene in the NCBI database.
Edit: Can someone tell me how to prepare Mutashige and Skoog media?
[Edited on 24-2-2019 by Nate]
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
https://en.wikipedia.org/wiki/Murashige_and_Skoog_medium#Ing...
You'll need some way to sterilize it; do you have an autoclave?
|
|
Nate
Harmless
Posts: 43
Registered: 2-3-2018
Member Is Offline
Mood: No Mood
|
|
No, but I do have a pressure cooker. I really need to invest in one.
|
|
RogueRose
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1590
Registered: 16-6-2014
Member Is Offline
|
|
I've been looking into this (on a minimal level b/c I don't fully understand it). What I'm wondering is if you can take a plant that produces some
kind of alkaloid or material (the sap, or material in the sap) and engineer another plant (possibly in the same family/genus) to produce the same
alkaloid or material.
The ones I was most interested in are rubber latex (so rubber can be produced from something other than the rubber tree) and opium poppies.
For the rubber latex, it would be REALLY great if a plant could be engineered that is grown as a perennial crop, like corn, instead of having to rely
on plantations of 7-25yr old trees for production. These plants are a clonal monoculture (all spawns/clones from one source) and are very susceptible
to a blight that could destroy an entire nation or continent's rubber trees. If it was an annual crop, this wouldn't be such a big issue if you loose
one year's crop and if a disease appeared, destroying the crops is much easier than having to destroy a forest that takes 7 years to reach production
stage (and only 15 years of production per tree on average). It would also be great if a plant that could be grown in less tropical climates could be
created so we aren't dependent on Asia for 80-90% of rubber output. If the production amount could also be increased, that would be a HUGE help.
If you want to make SERIOUS moeny (like many billions), then work on finding a way to engineer a blight resistant rubber tree. w/o rubber, our world
would be F'd b/c synthetic rubber is no where near the same properties. Natural rubber is really an amazing substance - you will find it in some high
end electronics (power tools - Matabo, Hilti & maybe some good hot plate stirrers, b/c they are more resistant to higher heat, bending etc, but
the process to make the power cords is much more expensive - you have to mold the cord with molten lead that cools & contracts to be removed once
it is cooled. This acts as a compression to give it perfect form & part of the vulcanization process I believe).
I'm wondering if plants like poison hemlock, milkweed and others that produce a "latex" like material could be modified to produce a "rubber latex"
since they already have similar sap's.
As far as the opium poppy, being able to engineer what alkaloids are produced instead of it producing 7-20 different alkaloids, would be very helpful
in the pharmaceutical industry. If another plant (that grow larger in size) could be made to produce these alkaloids in a perennial crop, that would
also be a huge benefit. All of this would also reduce the funding in drug running and terrorism $$ that comes from the sale of opium from "those
regions", where pharmaceutical companies buy raw opium for production of their products (IDK the %, there are many legit poppy crops like in Turkey,
Tasmania and I think France).
Is there a name for trying to get a plant to produce an alkaloid other than what it normally produces? Might it be easier if the alkaloid that it
already produces is similar in molecular makeup to the desired compound, or does it really matter if it is being engineered from the ground up.
[Edited on 2-25-2019 by RogueRose]
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Quote: Originally posted by RogueRose ![](images/xpblue/lastpost.gif) |
As far as the opium poppy, being able to engineer what alkaloids are produced instead of it producing 7-20 different alkaloids, would be very helpful
in the pharmaceutical industry. If another plant (that grow larger in size) could be made to produce these alkaloids in a perennial crop, that would
also be a huge benefit. All of this would also reduce the funding in drug running and terrorism $$ that comes from the sale of opium from "those
regions", where pharmaceutical companies buy raw opium for production of their products (IDK the %, there are many legit poppy crops like in Turkey,
Tasmania and I think France). |
See this paper from 3 years ago which uses yeast: https://www.ncbi.nlm.nih.gov/pubmed/26272907
I was at a seminar given by Prof. Smolke last year and she mentioned her lab is working on some improvements to the process. (Also see here: http://smolkelab.weebly.com/research.html)
|
|
karlos³
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1520
Registered: 10-1-2011
Location: yes!
Member Is Offline
Mood: oxazolidinic 8)
|
|
Quote: Originally posted by RogueRose ![](images/xpblue/lastpost.gif) |
Is there a name for trying to get a plant to produce an alkaloid other than what it normally produces? Might it be easier if the alkaloid that it
already produces is similar in molecular makeup to the desired compound, or does it really matter if it is being engineered from the ground up.
[Edited on 2-25-2019 by RogueRose] |
This is simply called biotechnology ![:D](./images/smilies/biggrin.gif)
It involves all the processes being used to enslave some organism to produce an organic chemical, be it a pharmaceutical, an intermediate, even the
precursors to pharmaceuticals.
It depends on the organism of course, also the ability can be engineerded into an organism, but some produce already unengineered some precursors
which is unrelated to compounds produced by them, usually if something unrelated to it is added to a culture of them.
For example amino alcohols being made from a precursor produced by yeast(famous for l-PAC, less famously for example (S)-3-chlorophenylpropanol from
the corresponding ketone).
|
|
DrRadium
Harmless
Posts: 17
Registered: 30-11-2021
Member Is Offline
|
|
You have an autoclave. Autoclaves are just specialized pressure cookers. You put some water in the bottom of the pressure cooker. Put all the
components of the desired media plus agar mixed with water in a suitable bottle or erlenmeyer flask, cover top with aluminum foil or loose cap. Put
top on pressure cooker, heat up until water boiling and steam blowing out vent. Put the weight on the vent or activate whatever the mechanism is for
holding the steam in under pressure. Heat to 15psi, hold there for 20 minutes, shut off heat, let cool until pressure back at atmospheric and below
boiling. Cool to about 65-70°C. This is cool enough you can just barely keep your hand on the flask indefinitely. Take out flask/bottle, swirl, add
any antibiotics or other heat sensitive components needed for plates. These should be filter sterilized through a syringe filter or similar filter
for sterilization. swirl to mix, then pour as any of the many video examples on you tube such as this one:
https://www.youtube.com/watch?v=ey19jM6y7-c
That's it for autoclaving and pouring agar plates.
|
|
Chalo
Harmless
Posts: 15
Registered: 31-7-2017
Member Is Offline
Mood: Hopeful
|
|
Don't be discouraged, but it is rare to have a single gene make a pigment. For example, human melanin production requires at least eight genes. You
should also be aware that many plants are poyploid (have more than a pair of each chromosome). For example, potatos are tetraploid which makes the
result of changing one gene unpredictable.
I am ettaching an excelent general guide to plant biotechnology for you.
|
|
Chalo
Harmless
Posts: 15
Registered: 31-7-2017
Member Is Offline
Mood: Hopeful
|
|
OOps, messed up the attachment but here it is now
Attachment: agrobook 03 plant biotech.pdf (441kB) This file has been downloaded 261 times
|
|
Mateo_swe
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 526
Registered: 24-8-2019
Location: Within EU
Member Is Offline
|
|
If you want some info about DIY sterile teqniques look at the mushroom growing comunity, they got all info about pressure cooker sterilizations, glove
boxes, sterile flow hoods etc.
There are also many pdf ebooks about sterile plant growing, modifying plants and similar such things.
I attach a PDF about tissue culture growing.
Attachment: Plants_From_Test_Tubes_Complete.pdf (3.6MB) This file has been downloaded 298 times
Attachment: Tissue culture of ornamental cacti.pdf (1.9MB) This file has been downloaded 285 times
|
|
DrRadium
Harmless
Posts: 17
Registered: 30-11-2021
Member Is Offline
|
|
Quote: Originally posted by Metacelsus ![](images/xpblue/lastpost.gif) | Quote: Originally posted by RogueRose ![](images/xpblue/lastpost.gif) |
As far as the opium poppy, being able to engineer what alkaloids are produced instead of it producing 7-20 different alkaloids, would be very helpful
in the pharmaceutical industry. If another plant (that grow larger in size) could be made to produce these alkaloids in a perennial crop, that would
also be a huge benefit. All of this would also reduce the funding in drug running and terrorism $$ that comes from the sale of opium from "those
regions", where pharmaceutical companies buy raw opium for production of their products (IDK the %, there are many legit poppy crops like in Turkey,
Tasmania and I think France). |
See this paper from 3 years ago which uses yeast: https://www.ncbi.nlm.nih.gov/pubmed/26272907
I was at a seminar given by Prof. Smolke last year and she mentioned her lab is working on some improvements to the process. (Also see here: http://smolkelab.weebly.com/research.html) |
Let me dust off my copy of the Necronomicon and get the candles and my black robe out. Threads only 4 years old, only MOSTLY dead really, hardly even
a necropost....
A more accessible target for psychopharmaco-biotechnology is the pathway making psilocybin. Only 4 genes, all cloned, with proof that simple
co-expression of all 4 results in biosynthesis of the desired product.
https://pubmed.ncbi.nlm.nih.gov/28763571/
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7232020/
This makes possible something that absolutely no one should actually do without appropriate licensure by pertinent authorities but with which I came
up with as a thought experiment. In the early 1990's while drinking homebrew with other grad students, we were talking about prodrugs and musing over
'hallucinogen-ogens' (or a preprodrug and thus a hallucinogen-ogen-ogen). I cooked up a way to use yeast biology to produce 2 transgenic yeast
strains that only produce psilocybin when mixed together... a hallucinogen-ogenic yeast. When apart, they don't make anything subjectively
psychoactive except alcohol.
You just use standard lab haploid strains, one that is constitutively "a" in mating type and another that is "alpha' mating type. Half the pathway in
one strain, half in the other. Since there are 4 gene products in the pathway, Put two genes in one strain, two in the other, with each gene under
its own promoter/enhancer and with its own polyA site. Put the two transcriptional units one after the other as a cassette that insertionally
inactivates the URA3 gene on a cloning vector with the chromosmal URA3 locus and flanking DNA needed for recombination. These are commercially
available. Transform the yeast with the linearized construct and select with 5-FOA in minimal media plates for ura3- colonies. Most will be
recombinants with the disrupted URA3 gene expressing the two psilocybin synthesis genes. Inserting the transgenes in this way is vastly more stable
in the absence of selection pressure than any type of plasmid or even an artificial chromosome. Especially in haploids where there is no functional
copy of URA3 on a second chromosome 5 with which to recombine. Recombinants are the way to go when stable yeast transgenics are grown on rich media.
Just as everyone uses URA3 because negative selection with 5-FOA is so easy. Thus the components being commercially available.
Mating type "a" strain will express psiH (tryp-4-monooxygenase, usual substrate tryptamine, product 4-OH tryptamine) and psiM (transmethylase, usual
substrate phospho-4-OH-tryptamine, product is psilocybin). Mating type 'alpha' strain will express psiD (decarboxylase, usual substrate tryptophan,
product tryptamine), and psiK (4-OH tryp-kinase, usual substrate 4-OH tryptamine, product phospho-4-OH-tryptamine). They grow fine that way and each
strain will not produce psilocin, psilocybin, or baeocystin. 4-OH tryptamine isn't psychedelic (it will probably be produced in strain "a" due to
endogenous aromatic amino acid decarboxylases).
But mix the two strains together and they will immediately mate to form diploids. Diploids grow faster than the haploids, and will rapidly take over
the culture; They also possess the entire psilocybin biosynthetic pathway. Diploids will produce psilocybin, and thus will make psychedelic beer,
wine, and bread. The diploid strain can be propagated indefinitely on rich media and will only sporulate under starvation. Though it may start to
produce less psilocybin as is continually cultured since recombination may start to inactivate psi genes in some some cells.
There are ways to increase yield, but other expression systems are probably better for trying to maximize raw yield. As I said, a this was a thought
experiment, it only became something possible to do in 2017 when the genes in the pathway were cloned.
Please do not try this at home, or in a lab, or anyplace else without licenses and approval from whatever your local version of The Man happens to be.
If you do, remember I told you not to. Even if legal where you are and prison isn't a concern for you, this yeast will look like any other yeast and
someone consuming it accidentally could be harmed, at least psychologically. I can't and won't provide any more details about how to do this, at
least to anyone who doesn't have the necessary DEA (or your local equivalent) license to do so. I know....I'm a killjoy. I tell you it's possible
how to make psilo-beer and bread then tell you not to do it. What can I say, I'm old and like keeping the government licenses that allow me to make a
living.
OTOH, I swear that if a single gene or similar simple method for introducing high level spider mite resistance in edible plants is published, I will
make my own bioengineered french fillet green bean cultivar. I am that sick of spider mites destroying my f-ing bean plants every year. If only there
was a version of BT parasporal crystal protein that killed them, I'd already be on it.
|
|