Pages:
1
2 |
c12h22o11
Harmless
Posts: 4
Registered: 31-1-2006
Member Is Offline
Mood: No Mood
|
|
au out of sea water
u no how 4 every cuibic meter of salt water there is 1 ounce
of au!!
how would u get it out?
could u get the nacl out of the water and melt it and electrolysis the nacl in a down's cell would the gold fall
nere theanode?
|
|
Polverone
Now celebrating 21 years of madness
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3186
Registered: 19-5-2002
Location: The Sunny Pacific Northwest
Member Is Offline
Mood: Waiting for spring
|
|
There is nowhere near an ounce of gold in each cubic meter of ocean water. There is no known economical way to extract gold from seawater, but it is
an interesting theoretical question: given a cubic meter of seawater, how could you recover the minute amount of gold contained in it?
Your written communication skills are atrocious and if you continue to post like that your messages will be deleted without further consideration.
You're composing messages for a forum, not IMs or text messages.
PGP Key and corresponding e-mail address
|
|
c12h22o11
Harmless
Posts: 4
Registered: 31-1-2006
Member Is Offline
Mood: No Mood
|
|
would my idea work thow
|
|
c12h22o11
Harmless
Posts: 4
Registered: 31-1-2006
Member Is Offline
Mood: No Mood
|
|
and how much au is there per cubic meter of sea water
|
|
Polverone
Now celebrating 21 years of madness
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3186
Registered: 19-5-2002
Location: The Sunny Pacific Northwest
Member Is Offline
Mood: Waiting for spring
|
|
According to this ugly but informative page, modern estimates give up to 50 ppt gold in seawater. A cubic meter of seawater has a mass of ~1020 kg. You could
get about 51 micrograms of gold from that cubic meter of seawater. Even if electrolysis is a viable method of metallic gold liberation, you would have
a hell of a time seeing any gold. I would expect it would dissolve in other components of the melt.
Really, do take time to write: the next careless post you make, this thread is going to detritus.
PGP Key and corresponding e-mail address
|
|
darkflame89
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 255
Registered: 1-3-2004
Location: With probability 1, "somewhere" in this
Member Is Offline
Mood: No Mood
|
|
There's a significant amount of gold in the oceans, but the difficult thing is the process required to extract the gold is so much more expensive that
all the gold dredged up from the ocean cant pay for it.
You are nt the only person thinking about it, Haber once thought it too, because he wanted to help his country(Germany) to pay off the heavy debts.
But he did nt succeed. The problem is as said above, the process is too expensive.
Ignis ubique latet, naturam amplectitur omnem.
|
|
JustMe
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 111
Registered: 7-8-2003
Member Is Offline
Mood: No Mood
|
|
I wish, really wish I still had an old magazine. Waaaaaaaay back in the late 1960's/early 1970's I used to have a subscription to Chemistry magazine.
I don't even know if it still exists. It had cutting edge articles on the latest in Chemistry. But I eventually threw out my old issues 20 years ago
or so.
Why am I bringing this up? Because in one of those very issues was an article about this very question. Seems that a chemist had come up with an agent
(chelating, of course) that would selectively extract 100% of the gold from seawater. But at a mere $30 an ounce the process was ludicrous. I remember
reading something like gold would have to reach something like $300 and ounce to even consider the process feasible. So it was just a nice little
theoretical exercise.
Excuse me, but where is gold priced now??? Gosh I wished I had saved that issue! As a side note, he also had come up with an agent that extracted
Uranium, but, of course, that was even less feasible.
So actually, it HAS been done... but, I fear the article has been lost in time. All I remember is that it was in Chemistry magazine, sometime between
1968 and 1974. Microfiche anyone???
|
|
runlabrun
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 172
Registered: 4-12-2004
Member Is Offline
Mood: No Mood
|
|
"Pump the sea water to a vat, then heat the water off, the stuff you are left with try heating up to 1000C(argon atomsphere) to remove O2, then use
magtnics to remove iron materials, then use cynical tubes to remove heavy materials, then use fraction destalion eg.... "
Yes granted you can do that... but the point which has already been made several times in this thread is that the cost of such an excercise would
outweigh the value of the amount of gold obtained.
-rlr
|
|
neutrino
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1583
Registered: 20-8-2004
Location: USA
Member Is Offline
Mood: oscillating
|
|
Quote: | Originally posted by JustMe
But at a mere $30 an ounce the process was ludicrous. I remember reading something like gold would have to reach something like $300 and ounce to even
consider the process feasible. So it was just a nice little theoretical exercise.
Excuse me, but where is gold priced now??? |
$113/ounce, adjusted for inflation to 1970.
That article might still be worth looking at. That regent may have dropped in price if its precursors got cheaper.
|
|
JustMe
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 111
Registered: 7-8-2003
Member Is Offline
Mood: No Mood
|
|
Thanks for the math!
Yeah, you'd have a lot of issues of the magazine to go through (if they still exist someplace). Still, krypton and xenon are extracted from air even
though they are not exactly abundant - they just get caught in the process.
So with a chelating agent that selectively binds to gold all you've gotta do is just keep running the water through it (like zeolites???) and wait,
and wait and wait. What is "practical?"
Oh, I'm not saying it is really viable, still it isn't much different than a fractioning column, is it?
Anyway, maybe one brave soul will try and track down that article to see if this old time chemistry enthusiast's memory is right.
|
|
DeAdFX
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 339
Registered: 1-7-2005
Location: Brothel
Member Is Offline
Mood: @%&$ing hardcore baby
|
|
You could extract other things from sea water to make it worth your time. However table salt NaCl isn't exactly the most sought after compound by
women. Then and again you will probably have to sell your gold that you collect from the water to stay in bussiness.
I think the only viable way towards easier gold is to get your pan out and do some sifting...
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Gold is something like $550 per ounce.
That's about $17 per gram.
Each cubic metre of seawater contains something like 50 micrograms.
That's worth $0.00088
Where I live electrical power costs the equivalent of about $0.10 per KWHr
That's $0.000000027 per Joule.
Let's say I build my "gold mine" 10 metres above sea level (otherwise it may be washed away by the tide).
Pumping each tonne of water up to my factory will take (E= Mgh) 98000J and cost me 0.0027$
I spend $0.003 to recover $0.0009 worth of gold.
I'm losing money before I look at efficiency, capital costs, labour, R+D or anything else.
Can we please stop wasting bandwidth talking about this?
|
|
Microtek
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 849
Registered: 23-9-2002
Member Is Offline
Mood: No Mood
|
|
But when you are done with the water and pump it back into the sea, you can use a large percentage of the work to suck up more water. In total you
will only be paying for the frictional work in your pipelines ( and whatever process you would be using ).
I imagine a process conceptually like a blue whale sifting through the oceans to get the plankton.
|
|
Mr. Wizard
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1042
Registered: 30-3-2003
Member Is Offline
Mood: No Mood
|
|
Wasn't that mention of the quantity of Gold in sea water for a cubic mile?
|
|
densest
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 359
Registered: 1-10-2005
Location: in the lehr
Member Is Offline
Mood: slowly warming to strain point
|
|
Mr. Sucrose is a troll or can't handle decimal points.
According to the CRC Handbook of Chem & Phys., there are some interesting and expensive elements which are orders of magnitude more abundant than
Au. All values in ug/L:
Au: 0.004
Cr: 0.3
Cs: 0.3
Co: 0.02
Ge: 0.05
In: 20.
Mo: 10.
U:3.2
V: 2.5
Indium and Vanadium look like interesting candidates.
Instead of filtering ordinary seawater, what about investigating salt mines? There the seawater has already been fractionally crystallized...
|
|
Marvin
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 995
Registered: 13-10-2002
Member Is Offline
Mood: No Mood
|
|
Personally, I think we've allready been given a model that works by nature. Iodine only gets extrated from seawater (60ug/l random webpage) cost
effectivly by burning seaweed (and selling it at a higher price to meth heads). I think most of these elements will only come into their own from
seawater when we genetically engineer the chelating agent into a marine plant.
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
"But when you are done with the water and pump it back into the sea, you can use a large percentage of the work to suck up more water."
An admirable point, except that you can't do it the easy way because of outgassing. (At the plant, the system would be under a fairly good vacuum,
which is why I ignored this- I'm not saying it's impossible- it's just rather more difficult). The more slowly you run the plant, the more nearly you
can recover the potential energy, on the other hand, your income gets smaller so you can't pay the interest on the capital that you used to build the
plant.
You also run into potential problems of local depletion, but these might get solved as they have been for Br2 from seawater.
|
|
Ephoton
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 463
Registered: 21-7-2005
Member Is Offline
Mood: trying to figure out why I need a dark room retreat when I live in a forest of wattle.
|
|
has this been done
I remeber reading about that dude who tried it as stated
above.
what if one was rather than extract only au but
to do a full extraction of elements obtainable from the sea.
then the au would just be kind of iceing.
I must agree I cant see this being finatualy feasable.
there is a lot of info on sea extraction of au but I have
yet to see anyone ever make a buck from it.
|
|
Microtek
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 849
Registered: 23-9-2002
Member Is Offline
Mood: No Mood
|
|
Unionised:
Why would the system be under reduced pressure ? Are you thinking of a specific extraction process that requires a vacuum ?
The pump would have to be placed below sea level ( and so would be generating an overpressure to pump the water up ) precisely in order to avoid
boiling the water ( which would likely wreck the pump ).
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Imagine you get 2 pipes, one in and one out. Both dipping in the sea and reaching 10 M up to your plant.
Between them you put you gadget the extracts Au- say some magic absorbtion column.
Then you fill the system with sea water (say, you put bung in the bottom of each pipe and pour it in through a hole in the top, then close the hole
and remove the bungs).
When you remove the bungs the water at the base of the pipes will be near atmospheric pressure. The stuff at the top will be at a pressure of 1
atmopsphere minus the water head. For 10 M head that's pretty near a vacuum.
If the water were not volatile, and didn't have any air in it then even the weakest pump would push water through the system.
You could put a pump down near the sea to ensure the whole system was under pressure (near 2 bar abs at the bottom and near atmospheric at the top).
In fact, if you did that the system would be easy- you could just drain away the water from the plant- but you would lose all that energy. In order to
recover the energy, you would need to close the system and install a turbine at the bottom of the outlet pipe. All perfectly possible but awkward.
What you can't do is just "syphon" the water through- helped along by a little pump.
|
|
neutrino
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1583
Registered: 20-8-2004
Location: USA
Member Is Offline
Mood: oscillating
|
|
How about this: build the plant at or below sea level. Many such places exist (New Orleans, much of the Netherlands, etc.) so you could pump water
through easily with almost no loss, as long as it didn't have to go above around 10m. How high are the dykes and dams in the Netherlands and New
Orleans? I imagine they aren't that high.
|
|
Microtek
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 849
Registered: 23-9-2002
Member Is Offline
Mood: No Mood
|
|
OK I see your point, but I'm not quite convinced. Let's say you had an empty 10 m high narrow siphon ( and we'll just ignore for the moment why you
would want to build it so high above sea level ) with a pump at sea level. You then start pumping water into one end of the pipe and as the water
level rises, the pump has to deliver more and more force. Surely when the water reaches the top and starts to descend the other side, the pump will
experience less strain....
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
"Surely when the water reaches the top and starts to descend the other side, the pump will experience less strain.... "
Yes, precisely.
At the point where the water reaches the top of the syphon, the pump is working at its hardest. Once the descending leg starts to fill it sucks the
water so the pump's job gets easier. That suction will pull air out of solution from the water.
Let's face it, extraction of bromine from sea water is marginally ecconomical. Bromine is rather less valuable than gold (about 3 orders of magnitude
in a rather old catalogue I just looked in)but it's about 7 orders of magnitude more dilute. This is, pending some remarkable new discovery, not going
to work.
|
|
Microtek
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 849
Registered: 23-9-2002
Member Is Offline
Mood: No Mood
|
|
Oh, I have no doubt it won't be economically feasible. At least not as a huge plant for brute force extraction. I still think it should be (
conceptually ) possible to make a submarine field of some sort of sea weed or a synthetic analog which could fixate the minute concentration of gold.
Then you would "harvest" the field to work up the gold.
The point of our discussion ( from my point of view ) was just to indulge in a thought experiment.
When you say "That suction will pull air out of solution from the water." do you think of atmospheric air dissolved in the water ? I was under the
impression that you were talking about cavitation at the pump ( if it was placed at the top ) or at the top of the siphon.
If the former was the case then I don't think that there will be that much gas dissolved in sea water.
|
|
12AX7
Post Harlot
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
You'd be suprised. I always see gas bubbles on fresh containers of water sitting out, and that's ground water, not sea water. You'd have to
continuously pump out the air -- which, once you get a current going, might create a convection current.
Addmittedly, the ground is all dolomite around here, so a lot of that gas might be CO2. It sure keeps the Ca and Mg ions floating, until you boil it.
Tim
|
|
Pages:
1
2 |