lordcookies24
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 78
Registered: 2-1-2019
Location: pluto
Member Is Offline
Mood: curious
|
|
i have a distillation apparatus but i cant really use it.
my round bottom flask only touches a bit of my hot plate which does not efficiently transfer energy. i know i can get a heating mantle but they are
expensive. does anybody know of anyway to get around this problem?
btw my shift key is broken so that is why i don't have any capital letters
|
|
fusso
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
Put a water/oil bath between the RBF and hotplate.
Both shifts broken?!
|
|
lordcookies24
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 78
Registered: 2-1-2019
Location: pluto
Member Is Offline
Mood: curious
|
|
my laptop getting old rip
|
|
ninhydric1
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 345
Registered: 21-4-2017
Location: Western US
Member Is Offline
Mood: Bleached
|
|
I second what fusso says. You can use a metal pot, fill it with water or oil, put it on top of the hotplate and partially submerge your flask in the
fluid.
Also, welcome to the forum!
The philosophy of one century is the common sense of the next.
|
|
Ubya
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
a sand bath can be used for higher temperatures
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1640
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
How competent are you with making basic things? and what is expensive to you?
|
|
lordcookies24
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 78
Registered: 2-1-2019
Location: pluto
Member Is Offline
Mood: curious
|
|
i don't really know what would be classified as basic, i understand chemistry in theory but am only now getting in practice, i have a low budget since
i already spent around $350 on glassware and a hot plate
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Besides water and oil, baths of metal beads may also be useful.
Also, how did you type the $ sign without a shift key?
|
|
Abromination
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 432
Registered: 10-7-2018
Location: Alaska
Member Is Offline
Mood: 1,4 tar
|
|
I just touch my round bottom flasks to my hotplate and that has always seemed sufficient for me.
Never had a problem.
List of materials made by ScienceMadness.org users:
https://docs.google.com/spreadsheets/d/1nmJ8uq-h4IkXPxD5svnT...
--------------------------------
Elements Collected: H, Li, B, C, N, O, Mg, Al, Si, P, S, Fe, Ni, Cu, Zn, Ag, I, Au, Pb, Bi, Am
Last Acquired: B
Next: Na
--------------
|
|
lordcookies24
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 78
Registered: 2-1-2019
Location: pluto
Member Is Offline
Mood: curious
|
|
Quote: Originally posted by Metacelsus ![](images/xpblue/lastpost.gif) | Besides water and oil, baths of metal beads may also be useful.
Also, how did you type the $ sign without a shift key? |
That response was on my phone. Like this one.
|
|
cyanureeves
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
i always used aluminum foil as insulator.i wrapped the foil around the flask and over the hotplate like a mary poppins skirt.all the heat escaping the
hot plate is directed over and around the round flask.worked awesome and never has my flasks touched the burner.
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1640
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by lordcookies24 ![](images/xpblue/lastpost.gif) |
i don't really know what would be classified as basic, i understand chemistry in theory but am only now getting in practice, i have a low budget since
i already spent around $350 on glassware and a hot plate |
let me rephrase, can you wire a basic electrical circuit, and cut a soup can with out dying?
If so a 1500w light dimmer from local store, and a mantle from daschem for 33 dollars cad and some wire = veritable power heating mantle for about 50
dollars
If you have access to an old oven then you can salvage the high temp wire and the infinite switch from that but will be less precise then a dimmer
Once wired, the soup can was carefully packed with mineral insulating wool to insulate the live wires and to immobilize them inside the can.
If you want to make a separate build thread a great many of us should be able to help you.
![heating mantel.jpg - 515kB](https://www.sciencemadness.org/whisper/files.php?pid=576411&aid=72833)
[Edited on 4-1-2019 by XeonTheMGPony]
|
|
lordcookies24
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 78
Registered: 2-1-2019
Location: pluto
Member Is Offline
Mood: curious
|
|
Quote: Originally posted by XeonTheMGPony ![](images/xpblue/lastpost.gif) | Quote: Originally posted by lordcookies24 ![](images/xpblue/lastpost.gif) |
i don't really know what would be classified as basic, i understand chemistry in theory but am only now getting in practice, i have a low budget since
i already spent around $350 on glassware and a hot plate |
let me rephrase, can you wire a basic electrical circuit, and cut a soup can with out dying?
If so a 1500w light dimmer from local store, and a mantle from daschem for 33 dollars cad and some wire = veritable power heating mantle for about 50
dollars
If you have access to an old oven then you can salvage the high temp wire and the infinite switch from that but will be less precise then a dimmer
Once wired, the soup can was carefully packed with mineral insulating wool to insulate the live wires and to immobilize them inside the can.
If you want to make a separate build thread a great many of us should be able to help you.
[Edited on 4-1-2019 by XeonTheMGPony] |
Yea I can do that without dying. Do you use nichrome wire for heating?
Edit: a accidentally uploaded a pic
[Edited on 4-1-2019 by lordcookies24]
|
|
Ubya
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
no need for nichrome wire, on ebay you can buy the already made heating element woven with glass fiber in a cup shape
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
Amos
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1406
Registered: 25-3-2014
Location: Yes
Member Is Offline
Mood: No
|
|
Heat rises off the hot plate. 80% of the distillations I do use nothing but a centimeter or two of air between the flask and hot plate. If you want to
increase the heating efficiency just put a cone of foil around the boiling flask (narrow at the neck and as wide as the hot plate itself at the
bottom)
|
|
Heptylene
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 319
Registered: 22-10-2016
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Ubya ![](images/xpblue/lastpost.gif) | no need for nichrome wire, on ebay you can buy the already made heating element woven with glass fiber in a cup shape |
Sometimes they only sell the glass sleeve without heating element (and they count on people not seeing this), so make sure to read the listing before
buying. Maybe winding a heating element from nichrome would feasible anyway if you have a glass sleeve.
|
|
happyfooddance
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 530
Registered: 9-11-2017
Location: Los Angeles, Ca.
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by cyanureeves ![](images/xpblue/lastpost.gif) | i always used aluminum foil as insulator.i wrapped the foil around the flask and over the hotplate like a mary poppins skirt. | Quote: Originally posted by Amos ![](images/xpblue/lastpost.gif) | If you want to increase the heating efficiency just put a cone of foil around the boiling flask (narrow at the neck and as wide as the hot plate
itself at the bottom) |
Same great advice, but have to say I like cyanureeves' characterization a little better
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1640
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
https://www.ebay.ca/itm/500ml-250W-Inner-Sleeve-use-for-500m...
here is the link too
[Edited on 5-1-2019 by XeonTheMGPony]
|
|
lordcookies24
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 78
Registered: 2-1-2019
Location: pluto
Member Is Offline
Mood: curious
|
|
does not really matter cause i just broke half of my apparatus like a retard, i am getting new glassware tho
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1640
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
Go slow and gentle with your glass wear, but breaking it is part of the learning, when ever practical get two of every thing just for that reason.
Good quality silicon grease goes a long way, I use a type meant for water filters but have found it holds up good to most things.
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
I prefer sandbaths, no sticky oil on your flask and it absorps chemicals in case of a brake, and you can go above a hundred degrees.
Also the flask won't start floating when it goes empty.
|
|
DrP
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 625
Registered: 28-9-2005
Member Is Offline
Mood: exothermic
|
|
That is the normal suggested solution that they teach you at school.
Clamp it. You are supposed to clamp these things as a safety precaution anyway.
So - yea - oil/water/sand bath on the hot plate is standard. Always clamp it as standard.
\"It\'s a man\'s obligation to stick his boneration in a women\'s separation; this sort of penetration will increase the population of the younger
generation\" - Eric Cartman
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1640
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
If not too late keep the broken pieces, crush to repetitively moderate size (6-10mm) sieve to remove fines and save them as boiling chips. Trust me
when I say you will be needing them as you pursue the art of distillation.
|
|