Pages:
1
..
85
86
87
88
89
..
104 |
mackolol
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 459
Registered: 26-10-2017
Member Is Offline
Mood: Funky
|
|
No it won't. Even in some procedures it says that you use "tetrahydrofuran freshly distilled from sodium".
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
How dry do you need your THF?
|
|
gluon47
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 81
Registered: 20-9-2015
Location: oceania
Member Is Offline
Mood: fluorinated and dying
|
|
So the other day I made quite a large amount of bromine from NaBr/HCl/TCCA. I plan to use it to brominate vanillin to 5-bromovanillin. Problem is, the
bromination requires dry/anhydrous bromine and I'm out of sulfuric acid which is the obvious choice for drying bromine.
So my question is: is it likely anhydrous MgSO4/CuSO4/CaCl2 would be effective for drying bromine?
EDIT: why the hell this pictures here I cant work out, can't get rid of it. It's not related...![:mad:](./images/smilies/mad.gif)
[Edited on 20-8-2018 by gluon47]
[edit by moderator]
Offending picture removed (hopefully).
[Edited on 20-8-2018 by j_sum1]
reality is an illusion
|
|
karlos³
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1520
Registered: 10-1-2011
Location: yes!
Member Is Offline
Mood: oxazolidinic 8)
|
|
I have a short question I wonder about lately, and can't seem to find anything conclusive for.
Is it possible to prepare bromine in some solvent to use that instead of doing a distillation for purification of the bromine?
Since I would need a solution of bromine in a solvent anyway, I thought that it could be possible to directly prepare the bromine solution, in-situ
one could say?
Anything similar to overcome the need to do a distillation of the bromine would be helpful.
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
Woelen has a writeup on his site where he prepares bromine without distillation. I think MrHomeScientist has a video of the process.
|
|
karlos³
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1520
Registered: 10-1-2011
Location: yes!
Member Is Offline
Mood: oxazolidinic 8)
|
|
Thanks JJay, for your knowledge, I overcame that problem by iodinating my substrate instead, even in much higher yield ![:)](./images/smilies/smile.gif)
Sadly I have a stupid question again...
Right now, I need a Cu(II) salt and only have the metal.
The last attempt using 30% H2O2+H2SO4 and NaCl+Oxone both weren't that fruitful, also wasteful or obnoxious...
Quite a lot of possibly useful chemicals for this are on hand, but what is in the chemical cabinet is lacking in the head...
In short, I do not know what would be a fast, effective and least annoying(i.e. possibly no evaporation of lots of water, least gasses as possible
involved, things like that) way to make the piece of copper to a neatly handled Cu(II) salt?
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4299
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Electrolysis of copper wire in a an acid solution. Hydrogen peroxide and hydrochloric acid (or NaCl and sulphuric). Precipitate the copper with
sodium carbonate, and dissolve in your choice of acid.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
RogueRose
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1590
Registered: 16-6-2014
Member Is Offline
|
|
Slow crystal formation on recrystalization of FeSO4
I am trying a recrystalization of FeSO4 and I'm wondering why it is taking so long. I had about 120g of heptahydrate and it lists the solubility at
51.35g/100ml @ 54C, so I used 210ml of water, dissolved and filtered 2x. It has cooled to below room temp and is in the fridge but no crystals.
Do some comounds take a lot longer to form crystals? When I would work with things like Ca(NO3)2 and (NH4)2SO4 I would dissolve in boiling water
until saturated and then they would fall out very quickly as it cooled. Pretty much the same with CuSO4 but a little slower due to lesser solubility,
but it is very close to FeSO4.
|
|
SHADYCHASE54
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 150
Registered: 16-12-2010
Location: CaNaDay!
Member Is Offline
Mood: No Mood
|
|
pid power supply question
I bought a used thermolyne 21100 tube furnace one of the old analog types, unfortunately the pyrometer is broken and completely useless. Anyway, at
first I was going to swap the pyrometer for the same or a similar model. However, I soon found, what I thought would be a simple swap, was cost
prohibitive. Thusly, it is my intent to hollow out the base and install a pid with a SSR-40AA relay.
My first question is will I burn out the heating tube if I use the SSR-40AA when the furnace is a 110v 50/60hz AC 12-15 amp system? I, as you may have
concluded from the content I have provided thus far, am relatively new to electronics. Therefore I ask some indulgences on what might be your frayed
patience, as I sincerely appreciate any help or advice offered, if it will aid my project and expand my understanding.
I am also confused with how amperage effects a system when V is in line with specs. Obviously it is good form to match everything as closely as
possible to the (V) (I) requirements. However I also know that sometimes exact matches are not possible and at other times unnecessary. although in
this case I suspect a difference +25 amp might be testing the limits of tolerance a tad. In either case, I ask for some guidance. Should I buy a
SSR-15AA or will the 40AA model work as is. If neither of these will work and the pid for ac control is a shit plan altogether, pleas offer your
assessment as well as an explanation. thank you in advance of any replies.
Attachment: download.jfif (163kB) This file has been downloaded 796 times
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3634
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
The original controller would have been able to go to near 'full' power,
i.e. you could connect the heating element directly across the ac supply for full power.
An SSR controller cannot supply more than full power,
so should cause no harm.
________________________
Generally electronic components are rated for maximum allowable limits to variables,
so if you use a lower voltage/current/power than specified for the semiconductors,
usually there will be no problem.
In this specific case I would use an SSR with the highest rating practicable,
and a little spare,
so a 40A SSR is quite suitable for a 15A load,
I would choose it over a 15A SSR
either a 15A or 40A SSR should be 'heatsinked'.
I use a 40A SSR for my 1.6 A heating mantle.
If you go to extremes then secondary considerations such as leakage currents may become significant,
but not in this case.
[Edited on 7-10-2018 by Sulaiman]
|
|
SHADYCHASE54
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 150
Registered: 16-12-2010
Location: CaNaDay!
Member Is Offline
Mood: No Mood
|
|
thank you very much for your reply I will get it up and working today.
|
|
Ubya
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
does silica gel desiccant expires?
i found some old desiccant packets in my university lab, it clearly says "blue=active pink=activity reduced" so i suppose is the kind with cobalt
chloride. i removed the powdered silica gel from the packets and put it into a beaker, i then heated it to 110-120°C with stirring, but after about 1
hour just a few crystals were blue, most of them were this orange/pink (more on the orange side) color, i kept heating but nothing happened, just a
few crystals turned blue, the 95% of them kept their original color, so my question is: can i regenerate old silica gel? am i doing something wrong?
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
S.C. Wack
bibliomaster
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
I would not cheapskate and get an SSR without a heat sink...you may even want a small fan.
More heat and time.
|
|
Mesa
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 264
Registered: 2-7-2013
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Ubya ![](images/xpblue/lastpost.gif) | does silica gel desiccant expires?
i found some old desiccant packets in my university lab, it clearly says "blue=active pink=activity reduced" so i suppose is the kind with cobalt
chloride. i removed the powdered silica gel from the packets and put it into a beaker, i then heated it to 110-120°C with stirring, but after about 1
hour just a few crystals were blue, most of them were this orange/pink (more on the orange side) color, i kept heating but nothing happened, just a
few crystals turned blue, the 95% of them kept their original color, so my question is: can i regenerate old silica gel? am i doing something wrong?
|
remove the beads from soln. spread on a ceramic tray. bake in oven at 200*c+ for a few hours(until pink beads turn blue again.)
voila. regenerated silica gel dessicant.
|
|
Sydenhams chorea
Harmless
Posts: 29
Registered: 16-8-2009
Member Is Offline
Mood: No Mood
|
|
I found a reference for a Czech journal that is stated as:
Bohumil, P., Unsaturated androstanes. Czech. 127,564, 1968;
Bohumil P. Chem Abstr 1969;70:68637.
Anyone have any idea what the full name of this "Czech" journal is?
Il n'y a point de sots si incommodes que ceux qui ont de l'esprit.
François de La Rochefoucauld.
|
|
clearly_not_atara
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2725
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
From the list:
http://images.webofknowledge.com/images/help/WOS/C_abrvjt.ht...
the only chemical journal containing "Czech" is the Collection of Czechoslovak Chemical Communications, but that seems to be a miss. A search
on Google Scholar turns up a few works by a "Bohumil, Provaznik" who may be Czechoslovakian:
https://patents.google.com/patent/US3340961A/en
but this could just be a coincidence.
|
|
Frankie1
Harmless
Posts: 1
Registered: 2-11-2018
Member Is Offline
|
|
Benzocaine synthesis
Hi i am looking for help on a test I am running would it be possible to recrystallise benzocaine using diethy ether and Hydrochloric acid
[Edited on 3-11-2018 by Frankie1]
|
|
Texium
|
Threads Merged 3-11-2018 at 09:29 |
ninhydric1
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 345
Registered: 21-4-2017
Location: Western US
Member Is Offline
Mood: Bleached
|
|
Is it viable to prepare stearoyl chloride by chlorinating stearic acid with triphenylphosphine dichloride?
I'd rather not deal with (the difficulty of obtaining) phosphorus chlorides and (the mess that is) thionyl chloride, so I would like some expert input
on if the chlorination reaction above is possible.
The philosophy of one century is the common sense of the next.
|
|
ninhydric1
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 345
Registered: 21-4-2017
Location: Western US
Member Is Offline
Mood: Bleached
|
|
Can you dry THF with calcium chloride? I know that alcohols, ketones, etc. can't, but there hasn't been anything on using it to try THF.
The philosophy of one century is the common sense of the next.
|
|
wg48
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 821
Registered: 21-11-2015
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by ninhydric1 ![](images/xpblue/lastpost.gif) | Can you dry THF with calcium chloride? I know that alcohols, ketones, etc. can't, but there hasn't been anything on using it to try THF.
|
See http://delloyd.50megs.com/moreinfo/drying.html
Borosilicate glass:
Good temperature resistance and good thermal shock resistance but finite.
For normal, standard service typically 200-230°C, for short-term (minutes) service max 400°C
Maximum thermal shock resistance is 160°C
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3634
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
The document pointed to above suggests 4A molecular sieves to dry THF,
I'd use 3A sieves ... because I have 3A sieves and they are cheap and generally re-usable.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
S.C. Wack
bibliomaster
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
Quote: Originally posted by Sydenhams chorea ![](images/xpblue/lastpost.gif) | I found a reference for a Czech journal that is stated as:
Bohumil, P., Unsaturated androstanes. Czech. 127,564, 1968;
Bohumil P. Chem Abstr 1969;70:68637.
Anyone have any idea what the full name of this "Czech" journal is? |
That of the Czech patent office.
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
I second the recommendation to use molecular sieves. 3Å or 4Å will both work fine and they can get the THF quite dry. Molecular sieves are a good
investment, since they're reusable. They can be regenerated by heating in a microwave oven (I think there's a thread about this here on
Sciencemadness).
|
|
Amphoteria
Harmless
Posts: 1
Registered: 6-1-2019
Member Is Offline
|
|
Hey peeps,
So I'm planning to do a blanc chloromethylation reaction, but unfortunately my formaldehyde seems a bit outta wack. The bottle says it's a 37%
solution, but it is very old and there's a lot of white residue in the bottle. I assume this is paraformaldehyde that formed over time. So I'm
wondering how to redissolve the paraformaldehyde as formaldehyde so i can trust i actually have a 37% solution?
Any advice would be appreciated. This CH2O shit is causing me pains!
|
|
TheMrbunGee
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 364
Registered: 13-7-2016
Location: EU
Member Is Offline
Mood: Phosphorising
|
|
Quote: Originally posted by Amphoteria ![](images/xpblue/lastpost.gif) | Hey peeps,
So I'm planning to do a blanc chloromethylation reaction, but unfortunately my formaldehyde seems a bit outta wack. The bottle says it's a 37%
solution, but it is very old and there's a lot of white residue in the bottle. I assume this is paraformaldehyde that formed over time. So I'm
wondering how to redissolve the paraformaldehyde as formaldehyde so i can trust i actually have a 37% solution?
Any advice would be appreciated. This CH2O shit is causing me pains! |
wiki:
Paraformaldehyde can be depolymerized to formaldehyde gas by dry heating and to formaldehyde solution by water in the presence of a base or heat. The
high purity formaldehyde solutions obtained in this way are used as a fixative for microscopy and histology.
The resulting formaldehyde gas from dry heating paraformaldehyde is flammable.
|
|
Pages:
1
..
85
86
87
88
89
..
104 |