GrayGhost-
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 61
Registered: 31-10-2017
Location: Argentina
Member Is Offline
Mood: No Mood
|
|
potassium cyanide
I tempt synth potassium cyanide from termic process KNO3 + 4C = KCN + 3 CO , Carbon was obtain from sugar calcinated, like grain was coarse I
grindin in my mortar ( and pestle obvious) , mixture both components and warm with my oxyacetileic torch.
1) first run performed y little recipient of iron and was ignited with much smoke.
2) second run performed in this artefact.
![7xrQVp3.jpeg - 289kB](https://www.sciencemadness.org/whisper/files.php?pid=527583&aid=69789)
and same result mixture ignited again.
The artefact is composed by long tube is reaction chamber, glass with oil actuate like valve avoid intake oxygene, the short tube is security chamber
is when cool down suck oil and remain in this chamber and avoid contaminate of final product.
Im thinking in use carbon of coarse grain for avoid ignite again.
I m need suggestions please.
[Edited on 5-8-2018 by GrayGhost-]
|
|
Foeskes
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 156
Registered: 25-2-2017
Member Is Offline
Mood: No Mood
|
|
Maybe use excess carbon and purify the product with CH3OH
|
|
GrayGhost-
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 61
Registered: 31-10-2017
Location: Argentina
Member Is Offline
Mood: No Mood
|
|
I used excess carbon, but ignite.
The residue pour in water, carbon was precipitated, the liquid clear mixtured with diluited muriatic acid, and fizzing. Is this CNH? I dont have
courage for smell .
in 3° test use wet mixture, because steam displace oxigen of chamber, and again ignite.
I think use more coarse grain of carbon.
[Edited on 7-8-2018 by GrayGhost-]
|
|
Foeskes
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 156
Registered: 25-2-2017
Member Is Offline
Mood: No Mood
|
|
To be honest I think if you heating a mix of carbon and KNO3 long enough, it'll always ignite. It's likely carbon dioxide from the formed potassium
carbonate. The main problem about this reaction is that Cyanide's are reducing agents and your melting it with a oxidizing agent maybe if you heat the
ignited mix with charcoal even longer. Maybe you should use the urea method.
|
|
GrayGhost-
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 61
Registered: 31-10-2017
Location: Argentina
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Foeskes ![](images/xpblue/lastpost.gif) | To be honest I think if you heating a mix of carbon and KNO3 long enough, it'll always ignite. It's likely carbon dioxide from the formed potassium
carbonate. The main problem about this reaction is that Cyanide's are reducing agents and your melting it with a oxidizing agent maybe if you heat the
ignited mix with charcoal even longer. Maybe you should use the urea method. |
the next idea
4 run charcoal coarse grain.
5 run mineral carbon type coke.
The urea methode is for ferrocyanide or is other more direct?
[Edited on 8-8-2018 by GrayGhost-]
|
|
WGTR
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 971
Registered: 29-9-2013
Location: Online
Member Is Offline
Mood: Outline
|
|
There is an extensive discussion and good information on the various methods of cyanide production, including the urea method, in this thread:
http://www.sciencemadness.org/talk/viewthread.php?tid=23
I would not recommend heating a mixture of potassium nitrate and carbon/charcoal in a semi-sealed metal tube. The mixture is like sulfur-less black
powder, and the metal tube is like a pipe bomb if it gets clogged. Very dangerous.
|
|
GrayGhost-
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 61
Registered: 31-10-2017
Location: Argentina
Member Is Offline
Mood: No Mood
|
|
Well i find the patent of Mr Kellner, he use arc electric furnace, melt previosly the nitrate and mix with carbon for produce nitrite, then go to
electric furnace.
US patent 579988. citaded by Polverone.
|
|
Boffis
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1850
Registered: 1-5-2011
Member Is Offline
Mood: No Mood
|
|
Could you dilute the K nitrate with potassium hydroxide to reduce the tendency to deflagrate. Then leach the residue with a small amount of alcohol to
preferentially remove the excess KOH.
Alternatively how about using potassium cyanurate and charcoal?
K<sub>3</sub>C<sub>3</sub>N<sub>3</sub>O<sub>3</sub> + 3C → 3KCN + 3CO
K3C3N3O3 + 3C -> 3KCN + 3CO
Does anyone know why all of a sudden the subscripts won't display correctly in HTML
[Edited on 8-8-2018 by Boffis]
[Edited on 8-8-2018 by Boffis]
|
|
GrayGhost-
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 61
Registered: 31-10-2017
Location: Argentina
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Boffis ![](images/xpblue/lastpost.gif) | Could you dilute the K nitrate with potassium hydroxide to reduce the tendency to deflagrate. Then leach the residue with a small amount of alcohol to
preferentially remove the excess KOH.
Alternatively how about using potassium cyanurate and charcoal?
K<sub>3</sub>C<sub>3</sub>N<sub>3</sub>O<sub>3</sub> + 3C → 3KCN + 3CO
K3C3N3O3 + 3C -> 3KCN + 3CO
Does anyone know why all of a sudden the subscripts won't display correctly in HTML
[Edited on 8-8-2018 by Boffis]
[Edited on 8-8-2018 by Boffis] |
The trick is NO2K not NO3K according to patent. I dont have acces to KOH, NaOH . Is forbidden and /or restricted here.
Can preparate cyanurate with DCCA ?
|
|
Foeskes
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 156
Registered: 25-2-2017
Member Is Offline
Mood: No Mood
|
|
https://youtu.be/xz7i11XC9wk
|
|
Chem Science
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 122
Registered: 30-7-2018
Location: Argentina
Member Is Offline
|
|
Quote: Originally posted by GrayGhost- ![](images/xpblue/lastpost.gif) |
The residue pour in water, carbon was precipitated, the liquid clear mixtured with diluited muriatic acid, and fizzing. Is this CNH? I dont have
courage for smell .
[Edited on 7-8-2018 by GrayGhost-] |
O MY GOD ... DON'T TRY TO ADD ACID TO CYANIDES. THAT'S NOT A GOOD TEST !! Use iron chlorides in dilute conditions !! The Prussian Blue test
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
Here is a good historical account of methods, mostly at elevated temperatures, see https://www.911metallurgist.com/blog/how-to-make-cyanide .
-------------------------------
Did come up with a 'radical' idea based on the possible action of the hydrogen atom radical on cyanate at low pH absence oxygen. Likely paths include:
.H + OCN- = OH- + .CN
Or: .H + OCN- = .OH + CN- (most probable being reverse of Eq (12) in the Haynes reference below)
Or: .H + OCN- = .OHCN- (which could interestingly be akin to the chlorine .OHCl- radical anion)
If .CN is created, possible further reactions:
.CN + .CN --> (CN)2
(CN)2 + H2O --> H2C2O4 + NH3 (which could produce an insoluble oxalate precipitate)
.H + .CN = HCN
.CN + H2O = .OH + HCN
......
Some background on the cyano radical see https://en.wikipedia.org/wiki/Cyano_radical and https://www.sciencedirect.com/science/article/pii/0010218077... Also, see https://aip.scitation.org/doi/10.1063/1.463945 for other suggested (unexpected?) reactions.
-------------------------------------
Sources of .H include:
Fe --> Fe(ll) + 2 e-
Fe(ll) --> Fe(lll) + e-
H+ + e- = .H
.OH + H2 = H2O + .H
and also, heating H2 to high temperatures, and photolysis of pure hydrogen,....or ELECTROLYSIS of water in the presence of an oxygen scavenger.
----------------------------------------
Performing a search on electrolysis involving cyanates finds an old mining method to recover ore claiming 'Cyanide Regeneration' employing an oxygen
scavenger (KI is recommended). See Engineering and Mining Journal, Volume 90, Ocober 8, 1910, discussing the 'The New Clancy Cyanide Patents', at
https://books.google.com/books?id=wIogAQAAMAAJ&pg=PA701&... .
The author of the process notes a major well known obstacle in working with cyanates, to quote:
"when cyanates are allowed to stand for any considerable time, or are retained in solution, they are converted into ammonia and potassium carbonate,
and are transposed by the lime used in the cyanide process into insoluble carbonates or by the action of sulphuric acid in the ore into sulphates—so
that the original cyanide finds itself eventually in the residue dumps in the form of sulphates or insoluble carbonates."
The Clancy method further involves also the addition of an amide compound to quote:
"To show the action of these amide compounds, take, for example, urea (carbamide) and add this to a solution of a cyanate (such, for example, as
potassium cyanate) and electrolyze this mixture between inert electrodes. After a few minutes the said mixture will be transformed into one which will
dissolve the precious metal in alkaline solution. "
The role of amide in recent work ("Bifurcate localization modes of excess electron in aqueous Ca(2+)amide solution revealed by ab initio molecular
dynamics simulation: towards hydrated electron versus hydrated amide anion." by Zhang R, Bu Y., see https://www.ncbi.nlm.nih.gov/pubmed/27351489 ) suggests a promotion of solvated electron activity. See also https://www.sciencedirect.com/science/article/pii/0146572484... .
Bottom line, one may find this old Clancy method as a path to convert CNO- to CN-, which I discovered based on my 'radical' idea.
Related chemistry, see https://www.911metallurgist.com/chemistry-cyanogen-compounds... .
[Edited on 11-8-2018 by AJKOER]
|
|