Vylletra Heart
Harmless
Posts: 16
Registered: 25-6-2017
Member Is Offline
Mood: No Mood
|
|
Need help with growing crystals of sodium cobalt oxalate complex
In my efforts as shown here to make the complex, it seems that the solid that forms is rather amorphous, and the tiny crystals that form on the surface of the solution
do not maintain their structure when they grow larger. Apologies for the poor image quality, I have only a phone camera on end. I would like to ask if
anyone who has dealt with this complex before could give me some advice on how to grow these crystals.
The process I used to make the solution is as follows: Mix cobalt chloride with sodium oxalate, then filter the cobalt oxalate precipitate. Mix the
cobalt oxalate precipitate with a fresh solution of sodium oxalate. Heat the mixture until a dark reddish purple color forms, then filter. Evaporate
at room temperature(30C where I live).
I suspect that the amorphous solid could be due to unreacted sodium oxalate as it looks rather white, however, this observation is not really reliable
as when the solid starts to form a thick layer, it has a light pink coloration even when washed thoroughly with water.
|
|
|
crystal grower
Hazard to Others
Posts: 474
Registered: 3-1-2016
Location: Os Petrosum
Member Is Offline
Mood: Puzzled
|
|
I'd say the cobalt oxalate hydrolyzes in the solution. Maybe adding some oxalic acid would help.
|
|
|
DraconicAcid
International Hazard
Posts: 4333
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Online
Mood: Semi-victorious.
|
|
I haven't tried the cobalt complex, but the analogous copper complex crystallizes best with cooling. It's very soluble in hot water, and almost
completely insoluble in cold. That might work better than evaporation.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Bezaleel
Hazard to Others
Posts: 444
Registered: 28-2-2009
Member Is Offline
Mood: transitional
|
|
Another possibility is that some chloride has remained. I much prefer suction filtration above solely gravitational filtration for that reason. Also,
rinse the residue with some extra water while still not yet entirely filtered to dryness. If I go for higher purity myself, I take a second step by
mixing and thoroughly stirring the residue with water and then filtering again.
With crystal growth the presence of "foreign" ions may enhance as well as inhibit the formation of well-shaped crystals. Testing is required. E.g. I
have a nickel complex with iodide as the free anion, and the addition of extra KI enhances the formation of large crystals. With
ammonium-cobalt-sulphate, I found that extra ammonium sulphate gave the same effect as you describe. Also, my surfaces were not shiny, whereas others
have lovely surfaces with that compound.
|
|
|
fusso
International Hazard
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
Maybe the Na salt crystallize not as well as the K salt?
Just like Tutton's salts?
[Edited on 14/06/18 by fusso]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
:
