Pages:
1
2
3 |
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1703
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
OTC source of thiocyanates or ferrocyanides?
What are the most common uses for thiocyanates? Any products out there that could contain a fair amount? I suppose I could synthesize it from
ferrocyanide, but again I don't know where to look for it. Ebay isn't really an option (overseas shipping and customs etc).
I need some as a rectifier for caustic black baths, thiocyanates are the only rectifier I have found so far.
We're not banging rocks together here. We know how to put a man back together.
|
|
Bert
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
Are you blackening ferrous metals, or something else?
--------------------
Does anyone in your country still use old fashioned blueprints? Or cyanotype photographic processes?
If anyone there sells photographic chemicals, you might look there.
[Edited on 4-17-2018 by Bert]
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1703
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Yeah, it's a plain caustic black bath for steel.
Haven't found many shops selling photo-chems, and none of them had any thiocyanates. Cyanotype seems to be the best option, but it still involves
import. It's still better than photo-chems, I have found a couple of cases where they tested positive for GHB. I don't need the police kicking down my
door over some bogus drug charge...
We're not banging rocks together here. We know how to put a man back together.
|
|
Bert
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
High or low temperature? I assume high (around 141 C), but just to be sure.
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
Swinfi2
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 131
Registered: 19-2-2018
Location: England
Member Is Offline
Mood: Catalytic
|
|
Isn't K2Fe(CN)6 use as an anti-caking agent in table salt?
That would be a inconvenient source but maybe you can buy it as the additive?
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1703
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
High temperature.
We're not banging rocks together here. We know how to put a man back together.
|
|
Boffis
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1850
Registered: 1-5-2011
Member Is Offline
Mood: No Mood
|
|
Both ferrocyanides and thiocyanate can be prepared easily from Prussian blue pigment. This pigment is fairly cheap if you can find a supplier, it
depends I suppose on which country you are in. Try a larger supplier of art materials or specialist pigment suppliers.
The process method has been described on SM on several threads already.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1703
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Prussian blue is an interesting option. I do have some in the form of marking compound for metal work, but it's fairly expensive. I'll start digging
through art&crafts-suppliers to see if anyone sells the pure stuff at a reasonable price.
We're not banging rocks together here. We know how to put a man back together.
|
|
PirateDocBrown
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 570
Registered: 27-11-2016
Location: Minnesota
Member Is Offline
Mood: No Mood
|
|
You can get Prussian Blue by just evaporating off the water from laundry bluing. Around here you can get an 8 oz bottle of bluing, yielding about 100
grams of pigment, for about $5.
It will have small traces of gluteraldehyde and oxalic acid additives, (at least the brand I use) but otherwise essentially pure Prussian Blue.
Phlogiston manufacturer/supplier.
For all your phlogiston needs.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1703
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
I have never seen any laundry bluing products around here, and a web search didn't turn up any products either. But I have found a shop that might
sell pure prussian blue pigment at a reasonable price, so I think I will try that route first.
Boffis: I couldn't find any posts on prussian blue to thio, but several using alkali salts. I assume those should work as well?
We're not banging rocks together here. We know how to put a man back together.
|
|
PirateDocBrown
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 570
Registered: 27-11-2016
Location: Minnesota
Member Is Offline
Mood: No Mood
|
|
You can easily find Mrs Stewart's bluing on eBay.
I also would like to hear of good synthetic routes to both thiocyanides and ferrocyanides.
[Edited on 4/18/18 by PirateDocBrown]
Phlogiston manufacturer/supplier.
For all your phlogiston needs.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1703
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
True, it's just so painful having to pay 3xprice for shipping. I'll give the local sources a chance first.
We're not banging rocks together here. We know how to put a man back together.
|
|
Boffis
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1850
Registered: 1-5-2011
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by PirateDocBrown ![](images/xpblue/lastpost.gif) | You can get Prussian Blue by just evaporating off the water from laundry bluing. Around here you can get an 8 oz bottle of bluing, yielding about 100
grams of pigment, for about $5.
It will have small traces of gluteraldehyde and oxalic acid additives, (at least the brand I use) but otherwise essentially pure Prussian Blue.
|
If you already have the pigment in suspension and want to make ferrocyanide just add a strong warm solution of KOH or NaOH until the blue colour has
turned to an even dark brown, stir periodically and allow to settle for a day or so to make it easier to filter. Potassium ferrocyanide is less
soluble in the cold so crystallises more easily.
@Fulmen, Thiocyanates are prepared from either dried potassium or sodium ferrocyanide and sulphur. They are simply mixed with the appropriate metal
carbonate or hydroxide and sulphur and fused, the mixture turn black from the formation of iron sulphide and the appropriate thiocyanate leached out
with water and crystallised by evaporation. I am sure this is mentioned in a thread somewhere on SM.
There's even a chemplayer video https://www.youtube.com/watch?v=CKNBKCnnwLY
If not it is certainly covered in several practical inorganic chemistry books
Here's a link to an ebay supplier in the UK, I have bought this brand so I can vouch for the quality:
https://www.ebay.co.uk/itm/Cornelissen-Dry-Pigment-Prussian-...
[Edited on 18-4-2018 by Boffis]
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1703
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Thanks, Boffin. I was searching for a direct route, but converting it to the sodium salt isn't much work.
I have found a shop selling Paris Blue PB27. It's listed as ferriammonium ferrocyanide, but I doubt if that matters.
We're not banging rocks together here. We know how to put a man back together.
|
|
Boffis
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1850
Registered: 1-5-2011
Member Is Offline
Mood: No Mood
|
|
@Fulmen, There is also this thread on SM
http://www.sciencemadness.org/talk/viewthread.php?tid=21329#...
but I have to say the OP's "recipe" is a bit off the mark as Blogfast pointed out. It need a source of nitrogen. Now a days cyanuric acid left over
from making chlorine from TCCA tablets is probably a better source of nitrogen, or perhaps calcium cyanamide if you want to try making the
ferrocyanide yourself without Prussian blue.
There are numerous variations on the basic Prussian blue including so called "soluble" Prussian blue which is actually a colloidal preparation but all
work; a little ammonia may be evolved though.
It might be possible to convert Prussian blue directly to thiocyanate but I can't find a description of such a process but maybe heating the pigment
with potassium polysulphide (liver of sulphur which is sold as a patinized for bronze and other copper alloys) or just fused sodium sulphide might
work.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1703
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Well, since polysulfide is made by heating sodium carbonate and sulfur the original reaction should work as well. But I don't mind one extra step to
avoid any possible problems. Synthesizing it from scratch sounds like a fun challenge, I might just give it a try. I do believe I have some cast iron
turnings, and I can just dig plain steel turnings out of the lathe. Any idea what temperature is needed?
We're not banging rocks together here. We know how to put a man back together.
|
|
Boffis
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1850
Registered: 1-5-2011
Member Is Offline
Mood: No Mood
|
|
If you are going to try from scratch here are a couple of references that you might find useful. They are both old and out of copy write, both cover
the preparation of ferrocyanide from scratch and can be downloaded from the internet. The files are too large to attach to this post.
The Cyanide Industry, Robine & Lenglen, 1906
and
The Chemistry of Cyanogen Compounds an the manufacture and estimation, H E Williams, 1915
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1703
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Thanks, I love those old books. Downloading as I type.
We're not banging rocks together here. We know how to put a man back together.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1703
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Robine & Lenglen only lists one interesting direct route: "Igniting nitrogenous substance with potassium sulfate, or with sulfur and potassium
carbonate". No further details are given, so I question the feasibility of this route. The others require either cyanide, carbon disulfide or other
toxic or hard to get precursors. Williams did not list anything useful.
We're not banging rocks together here. We know how to put a man back together.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1703
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Seems like the same holds true for ferrocyanides, either Na/k+Fe+C+N at high temperature or cyanides in some shape or form. Using atmospheric N sounds
like a recipe for poor yields, and N-bearing organics would probably make for a very smelly afternoon. Neither sounds appealing.
We're not banging rocks together here. We know how to put a man back together.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1703
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
What are my options for safe, non-stinking sources of nitrogen (no proper ventilation for the furnace)? Cyanuric acid has been mentioned, but I can't
find it anywhere local. I can get TCCA, but converting it in any real amount would mean handling a lot of chlorine.
We're not banging rocks together here. We know how to put a man back together.
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Cyanuric acid forms when you heat urea to about 200˚C, giving off huge amounts of ammonia gas in the process. Surely you can obtain urea somehow?
In the presence of alkali metals, you get cyanate salts.
The first step in the process of learning something is admitting that you don't know it already.
I'm givin' the spam shields max power at full warp, but they just dinna have the power! We're gonna have to evacuate to new forum software!
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1703
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
*facepalm*
I only found coldpacks (expensive and unknown) and 600kg big bags. But AdBlue exhaust additive should be pure urea, and it's not that expensive
either.
I assume sodium cyanate would be the best choice, seems like CA decomposes at 400°C while the cyanate is listed with a mp of 550°C. The cyanate
could also be used for nitrocarburizing, something I could have a real use for.
We're not banging rocks together here. We know how to put a man back together.
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1703
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
OK, 4,7l of AdBlue aquired (should be more than 1.5kg of urea).
There seems to be some disagreement over which alkali salt is best: http://www.sciencemadness.org/talk/viewthread.php?tid=77330
However this writeup seems solid: https://chemistry.mdma.ch/hiveboard/methods/000442105.html
We're not banging rocks together here. We know how to put a man back together.
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Either K2CO3 or KOH should work. I think K2CO3 is preferred because it doesn't release or generate any water during the reaction. And the K salts
are supposed to be a lot easier to purify and isolate, plus I'm pretty sure melting point is lower.
The first step in the process of learning something is admitting that you don't know it already.
I'm givin' the spam shields max power at full warp, but they just dinna have the power! We're gonna have to evacuate to new forum software!
|
|
Pages:
1
2
3 |