amrhamed2
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 60
Registered: 14-12-2007
Member Is Offline
Mood: No Mood
|
|
triphosgene
I would like to ask about ur experience with syn of this reagent
Literature method used chlorination of dimethyl carbonate irradiated with uv lamp for 18 hours
I want to ask if there is any method to chlorinate the DMC in situ like using calcium hypochlorite to prepare chloroform .........I would like know ur
opinion in that plz
The problem is that I find it hard to produce chlorine gas for 18 hours continuously
amr h mahmoud
|
|
len1
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 595
Registered: 1-3-2007
Member Is Offline
Mood: NZ 1 (goal) - Italy 1 (dive)
|
|
The generator in prepublication can produce Cl2 for any length of time - whats important is the number of moles. Is there any mention of the excess
chlorine required.
|
|
Arrhenius
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 282
Registered: 17-8-2008
Location: US & A
Member Is Offline
Mood: Stochastic
|
|
Calcium hypochlorite will likely destroy the reagent. The reaction would have to be strictly anhydrous and completely free of even the weakest
nucleophile. If you can buy this reagent I think you're far better off doing so. Every time I open the bottle I get the nice 'fresh cut grass' smell
of phosgene. Mind you that the subsequent reactions with triphosgene can be extremely challenging as well.
|
|
len1
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 595
Registered: 1-3-2007
Member Is Offline
Mood: NZ 1 (goal) - Italy 1 (dive)
|
|
Quote: Originally posted by Arrhenius ![](images/xpblue/lastpost.gif) | Calcium hypochlorite will likely destroy the reagent. The reaction would have to be strictly anhydrous and completely free of even the weakest
nucleophile. If you can buy this reagent I think you're far better off doing so. Every time I open the bottle I get the nice 'fresh cut grass' smell
of phosgene. Mind you that the subsequent reactions with triphosgene can be extremely challenging as well. |
? My undestanding was that if you can smell phosgene you are breathing it at well beyond the concentration at which its doing you harm. Have you
experienced any after effects after smelling it?
|
|
BromicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3237
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
If you can smell it you're over your OSHA / NIOSH 8 hour average, but not necessarily into the harmful range. There is a table available of the
physiological responses to increasing phosgene concentration (Phosgene and related carbonyl halides: ISBN 978-0444824455 ) that gives a much better
indicator of what kind of exposures are tolerable and beyond tolerable (for short exposures). However if you think that it smells like fresh cut
grass you are smelling doses that are almost so low as to be imperceptible. Yes, you see the smell referenced as such everywhere, but that
description is antiquated, anyone with a chemical background that has smelled phosgene can give you a better/more accurate description of the smell
which most certainly only resembles fresh cut grass/hay on the most superficial level.
With regards to triphosgene, there is another method using ethylene carbonate as the starting material. I don't remember much about it but it was
discussed on this forum somewhere. I doubt the reaction conditions are any more accommodating but it might be worth a look.
[Edited on 7/24/2009 by BromicAcid]
|
|
Arrhenius
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 282
Registered: 17-8-2008
Location: US & A
Member Is Offline
Mood: Stochastic
|
|
Len1: Sure, it's probably harmful. I felt funny once after using it, but ultimately decided it was a placebo effect. Smelling it is well below the
lethal level undoubtedly.
BromicAcid: Ok, don't trust me... it really does smell a bit like cut grass. If this description is 'antiquated', either I'm old, or the human nose
has evolved in recent years. Perhaps you can give us all a better/more accurate description. I'll send you some triphosgene if you need to
check again what it smells like.
|
|
BromicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3237
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
Four days a week I work with phosgene and occasionally triphosgene. If you know what chlorinated hydrocarbons smell like, you've got half of the
equation right there, if you know what hydrogen chloride smells like you've got the other. It is sweet, bitingly so at first and pungent, burning...
I'm just saying that people fall back on the freshly mown hay description as a crutch, people in WWI were describing it that way because they had no
chemical background on which to base their descriptions on. I've smelled fresh cut grass and I honestly don't see much of a comparison. Historically
it's been related to fresh cut hay, not sure if there is a difference but there could be. Personally, if I had to compare the smell to something
simple and OTC, I would compare it to the smell of an isle of new shoes
|
|
Arrhenius
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 282
Registered: 17-8-2008
Location: US & A
Member Is Offline
Mood: Stochastic
|
|
Haha.. I'll be honest then... The smell freaks me out enough to not want to try to characterize its odor. I just open the bottle, weigh what I need
as quick as possible and move on. I do find its use to be a bit of a pain in the ass sometimes though. Have you managed to make any chloroformates
with it?
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
The smell of freshly cut hay (both dry and just from the meadow) is a smell I have smelt many times and which I do like (I associate it with good
summer days). In no way can this smell be compared with the acrid smell of HCl and also the sweetish smell of chlorinated hydrocarbons is quite
different. So, if the smell of phosgene is like a mix of the smells of HCl and chlorinated hydrocarbons, then I'm 100% sure that this is not the same
as the smell of freshly cut grass or freshly cut hay. I however never smelled phosgene and I think it is good if it keeps that way
|
|
entropy51
Gone, but not forgotten
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1612
Registered: 30-5-2009
Member Is Offline
Mood: Fissile
|
|
Pure COCl2 smells a little like fresh corn, especially green corn.
Moisture in the air hydrolyzes it to HCl and then it smells like, well, HCl.
Woelen, admit it. You want to make just a little, 100 mg or so.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Ok ok... just a little , just to get the idea of it and then quickly move on to another funny thing like
ClN3 or BrCN.
|
|
garuda
a.k.a. Sauron
Posts: 17
Registered: 30-7-2009
Member Is Offline
Mood: No Mood
|
|
The key paper on preparation of hexachlorodimethyl carbonate is in Angewandte Chemi by Eckerd and the English translation is in the International
Edition of same. I believe it has already been posted on this forum so UTFSE.
If that fails the Wiley SE will find it. The chlorination is under UV in CCl4, and the product is a solid.
It is a useful replacement for COCl2 that works most of the time. Diphosgene (trichloromethyl chloroformate) is more reactive but not quite as safe.
Do not make or use either outside of a hood.
|
|
e14
Harmless
Posts: 7
Registered: 23-10-2016
Member Is Offline
Mood: No Mood
|
|
Wikipedia says triiphosgene needs phosgene to begin with. So, why work with triiphosgene?
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
The place, where triphosgene is made need not be the place where the triphosgene is used. Handling triphosgene is much easier and less risky than
handling phosgene (albeit still quite risky and not something for the starting kitchen-chemist).
Btw, where does Wikipedia say that triphosgene needs phosgene to begin with? I do not read that on the wiki-page. It apparently is made from
dimethylcarbonate and chlorine, by completely chlorinating the methyl groups of this ester.
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4298
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
any time I've ever been exposed to phosgene, it's smelled like the bottom of an old lawn mower- nothing "fresh" about it.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
PirateDocBrown
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 570
Registered: 27-11-2016
Location: Minnesota
Member Is Offline
Mood: No Mood
|
|
I've always thought phosgene smelled like rotten grass, not fresh grass.
But I only got small whiffs, as I've only handled it inside a strong fume hood. Schlenkware from then on, so no further smell.
Phlogiston manufacturer/supplier.
For all your phlogiston needs.
|
|
Assured Fish
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 319
Registered: 31-8-2015
Location: Noo Z Land
Member Is Offline
Mood: Misanthropic
|
|
Triphosgene is made from dimethylcarbonate yes.
CH3OCO2CH3 + 6 Cl2 → CCl3OCO2CCl3 + 6 HCl
But dimethylcarbonate is made from phosgene.
COCl2 + 2 CH3OH → CH3OCO2CH3 + 2 HCl
So i suppose an amateur could prepare and use triphosgene from dimethylcarbonate if they were able to aquire dimethylcarbonate without making it
themselves, or making it without phosgene.
However, the statement about triphosgene being less dangerous or more easy to handle than phosgene seems incorrect by my assessment.
Triphosgene decomposes to phosgene by heat or hydrolysis.
OP, what is it you are intending to do with triphosgene?
or is this purely theoretical.
|
|
j_sum1
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 6256
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
This is an old thread resurrected for some reason by e14. Check the post history and determine how serious the line of enquiry is.
|
|
byko3y
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 721
Registered: 16-3-2015
Member Is Offline
Mood: dooM
|
|
As wiki correctly states, nobody's producing the DMC via phosgene route nowadays, except some small scale production, isotopes, etc.
Triphosgene is at least order of magnitude safer to work with due to the fact it has some vapor pressure of phosgene above the solid's surface instead
of being a pure phosgene.
My experience without fumehood tells me that i could keep the maximum concentration for a gas near the system below 5 ppm, while for a solid-liquid
1-2 ppm is possible. E.g. I made a distillation of elemental bromine without a need for ventilation, approx 1-2 ppm concentration of bromine could be
detected near the device.
Thus, triphosgene places this technique close to the edge of safe handling (I'd say not more than 10-20 minutes of exposure allowed in a few days,
even without odor sensible), while the use of phosgene gas is completely unacceptable (suicidal).
|
|
ninhydric1
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 345
Registered: 21-4-2017
Location: Western US
Member Is Offline
Mood: Bleached
|
|
1 L of DMC for $30 on Amazon:
https://www.amazon.com/MG-Chemicals-Dimethyl-Carbonate-Metal...
Bit pricey in my opinion, but for such an exotic chemical it isn't bad.
The philosophy of one century is the common sense of the next.
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Huh. Dimethyl carbonate has always been elusive for me. Interesting to see it on Amazon. I've wanted to attempt my bromide-catalyzed chlorination
reaction with this stuff, but never had the requisite safety equipment.
I've never smelled phosgene, but it certainly can't be good for you:
The first step in the process of learning something is admitting that you don't know it already.
I'm givin' the spam shields max power at full warp, but they just dinna have the power! We're gonna have to evacuate to new forum software!
|
|