Mabus
Wiki Master
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 238
Registered: 3-11-2013
Member Is Offline
Mood: Energetic
|
|
Calcinated oxides "reactivation"
As most people here know, majority of OTC oxides are calcinated which makes them very inert and practically useless as reagents. Now, I've seen some
people claiming success with using either molten alkali or molten NaHSO4 to fuse the oxide into a more reactive mass, but the claims are scattered on
the forum and there is no grand thread for these procedures. So I made this thread to ask people who have done this procedure to share their
experience here or if they can post on the wiki to write about it on its article, as I think this is an important procedure that some of us might need
at one point.
Link for the wiki article: http://www.sciencemadness.org/smwiki/index.php/Reactivation_...
|
|
spankyetal
Harmless
Posts: 23
Registered: 24-7-2017
Member Is Offline
Mood: No Mood
|
|
oxides as catalyst supports for anhydrides
Quote: Originally posted by Mabus ![](images/xpblue/lastpost.gif) | As most people here know, majority of OTC oxides are calcinated which makes them very inert and practically useless as reagents. Now, I've seen some
people claiming success with using either molten alkali or molten NaHSO4 to fuse the oxide into a more reactive mass, but the claims are scattered on
the forum and there is no grand thread for these procedures. So I made this thread to ask people who have done this procedure to share their
experience here or if they can post on the wiki to write about it on its article, as I think this is an important procedure that some of us might need
at one point.
there are incredible amounts of "green chemistry' catalysts being explored that run the gamut of usefulness.
From safer, more economic room temperature, solvent free reactions for large scale industrial uses to the lab synthesis of psychoactive substances.
I have been researching these compounds recently an am amazed at their potential. Their usefulness is exponential. read up on sulfated, calcined,
salts of Barium or Zirconium oxides especially. The trick is in the calcination step changing the crytal latice from a monoclinic form to a
tetragononal one. Thus increasing the surface area and acid or base strength a thousand fold of concentrated sulfuric acid. Yes a thousand fold
increase of acidity. And at ROOM TEMPs.
Link for the wiki article: http://www.sciencemadness.org/smwiki/index.php/Reactivation_... |
|
|
Fleaker
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1252
Registered: 19-6-2005
Member Is Offline
Mood: nucleophilic
|
|
For Ta2O5, if dead burnt or overly calcined, it is very slow to react, even under pressure with 70% w/v HF.
In that instance, it can be fused with KHSO4, added to dilute sulfuric, filtered off and then rapidly redissolved in dilute HF. Same with Nb.
Neither flask nor beaker.
"Kid, you don't even know just what you don't know. "
--The Dark Lord Sauron
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
When I extracted cobalt from carbide tooling I started by heating it at appr 850°C to get the oxides. Acid digestion was still slow, so I ended up
fusing it with NaOH. Worked like a charm, both cobalt and tungsten dissolved without problem.
We're not banging rocks together here. We know how to put a man back together.
|
|
MrHomeScientist
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
Currently I have a mix of elemental carbon and magnesium oxide, produced from the reaction between dry ice and magnesium ribbon. I'm trying to isolate
the pure carbon. The MgO is incredibly resistant to dissolution in sulfuric acid, even hot 98% acid, so I suspect the high heat of the reaction has
calcined it. Would hydroxide fusion help in this case? How does it work? Does it transform the oxide into another, more soluble, compound? And would
it leave the carbon intact?
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Basically it forms salts with acidic compounds (usually oxides). It probably won't work with MgO as it is basic.
We're not banging rocks together here. We know how to put a man back together.
|
|
aga
Forum Drunkard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Hang on a second.
Isn't 'calcining' merely heating it up a lot for a long time ?
How does that cause certain substances to become chemically inert ?
Others become more active, others decompose, yet others explode in the same process.
Does anyone know what is happening at the electron level with this 'calcining' thing ?
|
|
Fulmen
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
It seems to be related to surface area, porosity and possibly crystal structure. But I have to admit it doesn't make sense to me either. Dense, low
surface materials would of course react slower, but in many cases they seem to turn completely inert.
We're not banging rocks together here. We know how to put a man back together.
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
It might also be due to vitrification of the oxide - glasses, as we all know, are pretty resistant to attack.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
Velzee
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 381
Registered: 19-8-2015
Location: New York
Member Is Offline
Mood: Taking it easy
|
|
Yes, I have some Cr2O3 that has been calcined, but I'd rather just dissolve in acid. It's a shame that it requires alkali fusion
Check out the ScienceMadness Wiki: http://www.sciencemadness.org/smwiki/index.php/Main_Page
"All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident."
—Arthur Schopenhauer
"¡Vivá Cristo Rey!"
—Saint José Sánchez del Río
|
|