Gooferking Science
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 97
Registered: 17-7-2013
Location: Somewhere in Kansas, USA...
Member Is Offline
Mood: Halogenated
|
|
Separatory Funnel O-Rings
I recently lost an O-Ring for my separatory funnel’s stopcock down the drain. I am looking to buy a replacement, but I am unsure what type of O-Ring
will provide the chemical resistance that is necessary. It needs to be able to withstand many organic solvents as well as acidic and basic solutions.
Will Buna-N or Viton be sufficient? Or does it need to be something more substantial like PTFE or Chemraz?
|
|
Magpie
lab constructor
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
I would try the O-rings from Ace Hardware. I think they are made of Viton.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
I also think Viton would work well. It is almost as resistant to chemicals and temperature extremes as PTFE.
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4553
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
At work, I have nitrile (NBR), HNBR, and Viton O-rings. They all work fine, but the HNBR and Viton seem to be more durable for long term use than the
nitrile ones, which begin to wear out over time.
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1640
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
Viton is used in most HVAC gear, where it is exposed to some pretty nasty conditions.
|
|
NEMO-Chemistry
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1559
Registered: 29-5-2016
Location: UK
Member Is Offline
Mood: No Mood
|
|
I been using these with vac high temp grease. They are on ebay and ALL 4 boxs were sold together for £4
https://www.ebay.co.uk/itm/419pc-Rubber-O-Rings-Tap-Washers-...
![20180113_033026_-_Copy[1].png - 1.2MB](https://www.sciencemadness.org/whisper/files.php?pid=503649&aid=64059)
[Edited on 13-1-2018 by NEMO-Chemistry]
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2693
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
Great find Nemo, I paid a lot for a box of them years ago. But I always run out of the smaller ones for stopcocks whenever I have an assortment.
Viton is fine for most chemicals, the O-ring should not see much solvent if the stopcock does not leak.
|
|
PiledhigherandDeeper
Harmless
Posts: 17
Registered: 17-3-2013
Location: USA
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Dr.Bob ![](images/xpblue/lastpost.gif) | Great find Nemo, I paid a lot for a box of them years ago. But I always run out of the smaller ones for stopcocks whenever I have an assortment.
Viton is fine for most chemicals, the O-ring should not see much solvent if the stopcock does not leak. |
Dr. Bob (and ALCON)
https://www.harborfreight.com/180-piece-viton-o-ring-kit-675...
Picked these up for 10 bucks at HF yesterday. Granted you get 5-10 of numerous sizes, the price is right for me. A 50 pack of one size is about the
same price at McMaster Carr; I suppose it depends on how many of one size you go through.
Magpie,
Thanks for the tip about Ace. I am really developing a strong love for Ace Hardware and how they provide under the radar items for hobbyists.
|
|
Magpie
lab constructor
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
You're welcome. One member said that Ace is a chemical supplier masquerading as a hardware store.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
NEMO-Chemistry
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1559
Registered: 29-5-2016
Location: UK
Member Is Offline
Mood: No Mood
|
|
We have a crap hardware store! But seriously from a UK perspective, i can honestly say the above quote could be nearer the truth than you think.
Regulations would be less, plus its easy to justify alot of chems for a hardware/DIY type use. But set a Chemical company up and try and sell hardware
would not be so easy.
Your equiv to our SIC numbers would make it hard for a chem company to sell Hardware, but the SIC numbers are not difficult to switch around so a
hardware company could sell alot of chems.
|
|
PirateDocBrown
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 570
Registered: 27-11-2016
Location: Minnesota
Member Is Offline
Mood: No Mood
|
|
A while ago, California had a restriction on sale of MEK, I'm assuming for air quality reasons. So, WM Barr, the main maker of it for consumer
purposes, came out with "MEK substitute" for a short time. It was ethyl acetate, in inexpensive gallon quantities. Later, the restriction was
reversed, and Barr went back to MEK and discontinued the substitute.
But my local ACE has both on the shelves! Gotta love it.
Phlogiston manufacturer/supplier.
For all your phlogiston needs.
|
|