Pages:
1
2 |
bluamine
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 196
Registered: 17-8-2015
Member Is Offline
Mood: No Mood
|
|
Phosphorous pentoxide from phosphate?
Hi everyone!!
I want to make some P2O5 but i don't have any source for white phosphorous (unfortunately i can only get small amounts of red phosphorous) So i must
use calcium phosphate (or any other phosphate salts as an intermediate)
Need your help!!
|
|
Aqua-regia
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 126
Registered: 18-12-2006
Member Is Offline
Mood: No Mood
|
|
you can get pure and usable P2O5 from dry red phospor burning with dry oxygen /aer. Other methode don't exist, unless you want wasting your
time.
Preparation of red phosphorous is hard job. Before you something ask please using the google! look this topic:
http://www.sciencemadness.org/talk/viewthread.php?tid=65
|
|
bluamine
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 196
Registered: 17-8-2015
Member Is Offline
Mood: No Mood
|
|
Unfortunately i don't have any source for white phosphorous rather than phosphate fertilizer (i have read some documents about extracting phosphorous
from urine!! but that seems incredible & unpractical).. I just mentioned red phosphorous as an alternative for white one, i am not planning to get
it though
|
|
bluamine
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 196
Registered: 17-8-2015
Member Is Offline
Mood: No Mood
|
|
Unfortunately it sounds that it can not be prepared by phosphate salts pyrolysis.. & even their reduction is quite hard to do
|
|
BromicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3237
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
Why do you mean phosphorus pentoxide? Many transformations can be accomplished using metaphosphoric or pyrophosphoric acid. There is a thread around
here somewhere on the subject. Conversion of calcium phosphate to phosphoric acid via sulfuric acid in the 'wet process' is well established and
converting the formed phosphoric acid to something more aggressively dehydrating is covered on this forum.
|
|
bluamine
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 196
Registered: 17-8-2015
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by BromicAcid ![](images/xpblue/lastpost.gif) | Why do you mean phosphorus pentoxide? Many transformations can be accomplished using metaphosphoric or pyrophosphoric acid. There is a thread around
here somewhere on the subject. Conversion of calcium phosphate to phosphoric acid via sulfuric acid in the 'wet process' is well established and
converting the formed phosphoric acid to something more aggressively dehydrating is covered on this forum. |
First thanks for the informations. I have already thought about using phosphoric acid istead, but i am not sure if that would work. Honestly i am
planning to produce acetic anhydride through sodium acetate/acetyl chloride reaction. Both chemicals can be prodeuced from available chemicals
(especially the first one, the second one can be prepared more hardly)
|
|
BromicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3237
Registered: 13-7-2003
Location: Wisconsin
Member Is Offline
Mood: Rock n' Roll
|
|
Here is one of the relevant threads:
http://www.sciencemadness.org/talk/viewthread.php?tid=4409
What helps set metaphosphoric acid apart is that it will dehydrate sulfuric acid to sulfur trioxide. It is definitely worth a look as it is much
easier to make than phosphorus pentoxide (which would require phosphorus as an intermediate step).
|
|
chornedsnorkack
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 553
Registered: 16-2-2012
Member Is Offline
Mood: No Mood
|
|
How about a reaction like:
Ca3(PO4)2+3SiO2->3CaSiO3+P2O5?
Sure, P2O5 is a stronger acid than SiO2. But P2O5 boils under 800 degrees, while
SiO2 boils above 2200 degrees.
So, would it be feasible to distil off P2O5 by heating the reagents to, say, 1000 or 1500 degrees, and collect the condensed
P2O5 vapours, perhaps as solids under 400 degrees?
|
|
AJKOER
Radically Dubious
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
Heat H3PO4 to 316C to create HPO3:
H2PO4 → HPO3 + H2O
and, at that temperature, neutralize with MgCO3 forming Mg(PO3)2:
MgCO3 + 2 HPO3 → Mg(PO3)2 + H2O + CO2(g)
Source: http://magnesium.atomistry.com/magnesium_metaphosphate.html
Heat the dry Mg(PO3)2 to form the pyrosulfate and P2O5:
2 Mg(PO3)2 → Mg2P2O7 + P2O5
Source: https://books.google.com/books?id=lxlKAQAAMAAJ&pg=PA20&a...
Unfortunately, I suspect the decomposition of Mg(PO3)2 occurs way above 550 C!
Also, avoid reducing agents including carbon as phosphorous could form.
[Edited on 27-5-2016 by AJKOER]
|
|
bluamine
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 196
Registered: 17-8-2015
Member Is Offline
Mood: No Mood
|
|
You mean magnesium pyrophosphate!!
The amazing about that reaction is the fact we can (at least theorically) use pyrophosphate to recover our phopsphpric acid to gain more phosphorus
pentoxide..
Anyway how can we seperate the two products (phosphorus pentoxide & magnesium pyrophosphate)??!!
[Edited on 1-6-2016 by bluamine]
|
|
symboom
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1143
Registered: 11-11-2010
Location: Wrongplanet
Member Is Offline
Mood: Doing science while it is still legal since 2010
|
|
Very interesting also maybe copper phosphate could be turned into phosphorous pentoxide by decomposition such as copper sulfate heating leads to
formation of sulfur trioxide
And also silver phosphate may form phosphorous pentoxide on heating
|
|
ave369
Eastern European Lady of Mad Science
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 596
Registered: 8-7-2015
Location: No Location
Member Is Offline
Mood: No Mood
|
|
Does anyone have an experience of losing glassware to hot metaphosphoric acid? I've heard that it's a glass eater.
Smells like ammonia....
|
|
NEMO-Chemistry
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1559
Registered: 29-5-2016
Location: UK
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by ave369 ![](images/xpblue/lastpost.gif) | Does anyone have an experience of losing glassware to hot metaphosphoric acid? I've heard that it's a glass eater. |
I am pretty sure I have seen it on a msds for a glass etching gel, so i think your right.
|
|
Magpie
lab constructor
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
Quote: Originally posted by ave369 ![](images/xpblue/lastpost.gif) | Does anyone have an experience of losing glassware to hot metaphosphoric acid? I've heard that it's a glass eater. |
Please see the preparation of oleum by use of phosphoric acid:
https://www.sciencemadness.org/whisper/viewthread.php?tid=78...
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
symboom
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1143
Registered: 11-11-2010
Location: Wrongplanet
Member Is Offline
Mood: Doing science while it is still legal since 2010
|
|
Copper phosphate decomposes to copper oxide and phosphorus pentoxide?
|
|
Assured Fish
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 319
Registered: 31-8-2015
Location: Noo Z Land
Member Is Offline
Mood: Misanthropic
|
|
bluamine I think you missed something pointed out by Aqua-regia, both red phosphorous and white phosphorous will burn in air producing phosphorous
pentoxide.
Its just red phosphorous requires a little energy to get it started e.g. a flame.
You say you have access to red phosphorous in small quantities, how much is a small quantity?
Remember that P2O5 has a considerably larger molecular mass than phosphorous, thus burning 31g of red phosphorous would leave you with about 284g of
P2O5.
I think the best way to burn it would be to get a steel drum with a seal-able lid and then put the phosphorous inside and light it, followed by
quickly sealing the steel container, A pressure cooker should work fine.
If you do this in open air your product will likely contain a bit of phosphoric acid however you could rig up an oxygen generator with a calcium
chloride drying tube and enrich the oxygen inside the steel container, this will also ensure all of the phosphorous is oxidized, provided you didn't
burn to much.
............MnO2
2H2O2 -------> 2H2O + O2
https://www.youtube.com/watch?v=eI-HMUCEJsI
A pressure equalized addition funnel won't be required as the gas will only be led into the chamber which is at atmospheric pressure and will not
encounter any resistance.
Once the container has cooled to room temp you could then scrape the P2O5 off the walls of the steel container.
http://www.sciencemadness.org/smwiki/index.php/Phosphorus_pe...
I do like the idea of preparing P2O5 by decomposing copper or magnesium pyrophosphate however this would likely require some serious investment into a
steal retort.
If your are going to go that far then i just see no reason why you wouldn't go all the way and prepare white phosphorous via reduction of sodium
hexametaphosphate.
|
|
RogueRose
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1590
Registered: 16-6-2014
Member Is Offline
|
|
Quote: Originally posted by Assured Fish ![](images/xpblue/lastpost.gif) | bluamine I think you missed something pointed out by Aqua-regia, both red phosphorous and white phosphorous will burn in air producing phosphorous
pentoxide.
Its just red phosphorous requires a little energy to get it started e.g. a flame.
You say you have access to red phosphorous in small quantities, how much is a small quantity?
Remember that P2O5 has a considerably larger molecular mass than phosphorous, thus burning 31g of red phosphorous would leave you with about
284g of P2O5.
I think the best way to burn it would be to get a steel drum with a seal-able lid and then put the phosphorous inside and light it, followed by
quickly sealing the steel container, A pressure cooker should work fine.
If you do this in open air your product will likely contain a bit of phosphoric acid however you could rig up an oxygen generator with a calcium
chloride drying tube and enrich the oxygen inside the steel container, this will also ensure all of the phosphorous is oxidized, provided you didn't
burn to much.
............MnO2
2H2O2 -------> 2H2O + O2
https://www.youtube.com/watch?v=eI-HMUCEJsI
A pressure equalized addition funnel won't be required as the gas will only be led into the chamber which is at atmospheric pressure and will not
encounter any resistance.
Once the container has cooled to room temp you could then scrape the P2O5 off the walls of the steel container.
http://www.sciencemadness.org/smwiki/index.php/Phosphorus_pe...
I do like the idea of preparing P2O5 by decomposing copper or magnesium pyrophosphate however this would likely require some serious investment into a
steal retort.
If your are going to go that far then i just see no reason why you wouldn't go all the way and prepare white phosphorous via reduction of sodium
hexametaphosphate. |
IDK how you came up with the 31g yeilding 284g? from my calculations I think it is 124g to get 284g of P4O10 or P2O5. The molecular weight of P is
31 and O is 16. So 160g of O + 124g of P = 284g of P4O10
|
|
symboom
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1143
Registered: 11-11-2010
Location: Wrongplanet
Member Is Offline
Mood: Doing science while it is still legal since 2010
|
|
Assured Fish Quote: like the idea of preparing P2O5 by decomposing copper or magnesium pyrophosphate however this would likely require some serious
investment into a steal retort.
If your are going to go that far then i just see no reason why you wouldn't go all the way and prepare white phosphorous via reduction of sodium
hexametaphosphate.
Looks like a new project potential
Make phosphorous pentoxide from copper phosphate
So the same retort could be used to make white phosphorous
Just have to add aluminum or carbon the steel retort.
Also would decomposing ammonium phosphate
Yield phosphorous pentoxide and ammonia gas
[Edited on 8-1-2018 by symboom]
|
|
Assured Fish
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 319
Registered: 31-8-2015
Location: Noo Z Land
Member Is Offline
Mood: Misanthropic
|
|
RogueRose oh shit, yea i screwed that one up, i skimmed over the molecular weight of both, i forgot there were 2 phosphorous atoms present per 5
oxides.
Good thing im not the only one proof reading my scriblings.
symboom i dont think it would. As only NH3 would be lost, that 4th proton in the ammonium cation would stay behind.
(NH4)3PO4 ----> (NH4)2HPO4 ----> (NH4)H2PO4 ----> H3PO4
[Edited on 8-1-2018 by Assured Fish]
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
How pure is P4O10, formed by burning red phosphorus? I have red phosphorus, and when I ignite this, then it burns with a lot of white smoke, which is
(mostly) P4O10. I, however, always have some reddish or yellowish remains. I never took collected the white smoke of burning red phosphorus, but I can
imagine that it contains quite a large amount of lower oxides and maybe even some of the red or yellow stuff (which are sub-oxides of phosphorus, like
P4O).
For drying purposes the presence of lower oxides of phosphorus may not be that bad, but it makes the drying agent reducing, which may cause
incompatibilities with some compounds.
Anyway, I am not really fond of using P4O10 for drying. I tends to form a thin sticky and glassy layer around clumps of solid and this glassy layer
very effictively shields the lower lying P4O10 from reacting. P4O10 comes in the form of a very fine free flowing powder, but when used as drying
agent, it quickly clumps and then only a small fraction of the material reacts. I frequently mix it with CaCl2 (e.g. 10% P4O10 on 90% CaCl2), such
that the CaCl2 becomes covered with P4O10. This is a very nice method of drying certain gases which do not react with CaCl2 (e.g. Cl2, SO2, C2H2).
|
|
Aqua-regia
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 126
Registered: 18-12-2006
Member Is Offline
Mood: No Mood
|
|
The most important indrustially production of P2O5 is igniting of white phosphorus. This is the first step so called thermo process for producing
H3PO4. (Not red one) It is burned in spec. furnace with relatively high temperature to avoid the composition low valency oxidationsproduct.
|
|
clearly_not_atara
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2725
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
The heat in these phosphate decomposition reactions is probably -very- high, silver metaphosphate is stable up to 600 C (at least) and based on the
behavior of other salts I'd expect the silver salt to have the lowest decomposition temperature.
Salts of the H-phosphonic acid, H2PO3H, are available; by heating the monohydrogen salys you can produce salts of pyro-H-phosphonate (P2O5H2)2- eg
Na2P2O5H2. If you treat the pyro-H-phosphonates with chlorine, POCl3 should be produced:
2Na2P2O5H2 + 4 Cl2 >> 3 NaPO3 + NaCl + POCl3 + 4 HCl
[Edited on 8-1-2018 by clearly_not_atara]
|
|
zed
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2281
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
P2O5 may occasionally be purchased. It is not legally restricted.
Might not be possible to desiccate, other phosphates completely enough to form P2O5.
Phosphorus itself, unless you make your own, is quite hard to obtain.
Try the search engine. Perhaps there is a current P2O5 source listed.
|
|
Magpie
lab constructor
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
I have bought P2O5 from a supplier in Poland. Recently I ordered a lb from Firefox Enterprises in Pocatello. I haven't received it yet. Their
search engine is currently down. I will call them tomorrow.
[Edited on 9-1-2018 by Magpie]
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
PirateDocBrown
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 570
Registered: 27-11-2016
Location: Minnesota
Member Is Offline
Mood: No Mood
|
|
I got some from them, several months ago. Seems pretty good, but I haven't used it yet.
Phlogiston manufacturer/supplier.
For all your phlogiston needs.
|
|
Pages:
1
2 |