13enigma
Harmless
Posts: 48
Registered: 4-6-2017
Member Is Offline
Mood: No Mood
|
|
Is there an easy process to cut diamonds, perhaps a dremel tool or lasers
I was think of buying a dremel tool with Diamond blades but was told that it would not cut the rough diamonds I have. What techniques are there
employed by chemists and gemologists
|
|
aga
Forum Drunkard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Diamonds are generally cut with Diamonds.
Cleaving is a highly skilled art, where the cutter whacks one diamond against the other along a known cleave-line, where they know the diamond being
cut will probably split in this process.
Spinning the diamond against a fixed diamond can be used to shape them (both) into some round shape by abrasion.
Laser cutting also works.
All from Wiki : https://en.wikipedia.org/wiki/Diamond_cutting
|
|
karlosĀ³
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1520
Registered: 10-1-2011
Location: yes!
Member Is Offline
Mood: oxazolidinic 8)
|
|
Quote: Originally posted by aga ![](images/xpblue/lastpost.gif) |
Cleaving is a highly skilled art, where the cutter whacks one diamond against the other along a known cleave-line, where they know the diamond being
cut will probably split in this process. |
Somewhat reminiscable of the flint processing our ancestors did, no? ![:)](./images/smilies/smile.gif)
I bet one of those H. habilis would be very experienced in seeing and using the cleave lines of a diamond too.
|
|
macckone
Dispenser of practical lab wisdom
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
cutting diamonds is done by cleavage with a hammer and specialized chisel
|
|
Texium
|
Thread Moved 23-11-2017 at 19:09 |
phlogiston
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1377
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
Mercury can also be refined electrolytically.
Because it does not require heating it might perhaps be a less risky way of purifying Hg than distillation. It would involve soluble mercury salts,
however.
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer
|
|
zed
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2281
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Diamonds may be cut or faceted by other diamonds, along certain planes.
Other materials are actually harder than diamonds (or so I have been told). And, could thus do the job. Maybe.
Boron Nitride? I'll check. I checked. Greater compressive strength.
But, how does that translate into abrasive power?
https://phys.org/news/2009-02-scientists-material-harder-dia...
Also.....
When is a Diamond, harder than a Diamond?
https://www.sciencealert.com/scientists-have-made-a-rare-dia...
[Edited on 26-11-2017 by zed]
[Edited on 26-11-2017 by zed]
|
|