Foeskes
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 156
Registered: 25-2-2017
Member Is Offline
Mood: No Mood
|
|
Hexane as torch fuel?
I am building a torch that works by evaporating a solvent and burning it in a Bunsen burner like nozzel. However I can't seem to find a good fuel,
gasoline doesn't bun hot enough, toluene doesn't seem to be hot enough either(nearly enough though).
I thought hexane might be a good fuel. My goal is a torch that can be used for glassblowing.
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3631
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
For lampwork oxy-propane seems a popular choice. c2500 oC
Use commercial tanks, torch etc. as diy is not economical.
Kerosene is a common choice for your approach. c2000 oC
(gasoline c2100 oC)
__________________________
"gasoline doesn't bun hot enough"
2000 oC is 'hot' enough to melt glass,
maybe you are just not producing enough heating power (J.s-1)
[Edited on 13-7-2017 by Sulaiman]
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
Foeskes
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 156
Registered: 25-2-2017
Member Is Offline
Mood: No Mood
|
|
I'm using air as a oxidizer, and the gasoline was burning with a blue flame. I tried kerosene but it isn't very volatile.
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
Kerosene is a lot more volatile if pre-heated. One way to do that is to run a heating coil through the flame. This approach is also used for heptane
in camping stoves; I see no reason it wouldn't work for hexane if you happen to have it in great abundance.
|
|
Foeskes
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 156
Registered: 25-2-2017
Member Is Offline
Mood: No Mood
|
|
Isn't hexane already really volatile? Since its evaporation rate is 8 (BuAc = 1) Source: http://www.ilpi.com/msds/ref/evaporationrate.html
|
|
NEMO-Chemistry
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1559
Registered: 29-5-2016
Location: UK
Member Is Offline
Mood: No Mood
|
|
They make a weed killer flame thrower. 2000c, it has a wick thing inside that heats the coil just like JJ is describing.
We got one for weeding the drive I will see if i can take a pic, the fule comes out as a vapor and sounds like a jet engine going full chat!!
|
|
NEMO-Chemistry
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1559
Registered: 29-5-2016
Location: UK
Member Is Offline
Mood: No Mood
|
|
my pics were rubbish, but its this thing http://www.cheapmowers.com/acatalog/Sheen_X300_Flame_Gun_.ht...
The inside of the nozel has the copper coil in, they are cheap second hand on ebay, it says to use paraffin but i always used heating oil which is
pretty much kerosene, also had excellent result with biodiesel .
D NOT MIX PETROL in with it!!!!!
|
|
tsathoggua1
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 335
Registered: 8-1-2017
Location: Beyond the pale
Member Is Offline
Mood: Phosphorescent
|
|
You might want to avoid hexane actually. n-hexane at least. It is unusually toxic for a hydrocarbon due to its metabolism to form 2,5-hexanedione,
which is neurotoxic, due to its ability to crosslink lysine residues in nerve axon proteins and cyclize, which causes a form of generalized axonal
neuropathy, and can extend to CNS toxicity. I avoid n-hexane wherever possible, using either pentane or heptane as replacements as demanded by the
situation, pentane is especially handy for crystallizing things/washing things out of other things since it evaporates so readily.
|
|