Sulaiman
International Hazard
Posts: 3721
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Help! ... 25 litres of mystery liquid
I have relieved a neighbour of a 25 litre plastic (I think hdpe) drum that was dumped in their front garden 3 to 5 years ago and kept outdoors since
then, not knowing what to do with it.
Hydrochloric acid was suspected.
It is actually a light straw coloured, clear liquid, that smells somewhat like white spirit https://en.wikipedia.org/wiki/White_spirit
It burns with a yellow flame and some sooty smoke on a wooden splint but will not burn on concrete.
It appears imiscible with water, the yellow tint does not enter the water.
Freshly cut sodium does not tarnish within 10 min. when under this liquid, almost no bubbles seen forming.
Using alcoholmeter hydrometers, at 15oC I got a reading of 85 %ABV,
(methylene blue and HNO3 with NO2 and Zephyr/SM-yellow for coulour reference)
corrected to 20oC that is 86 %ABV, if ethanol and water, density = 0.828, which is quite a bit higher than white spirit.
Probably not too helpful due to multiple 'ingredients'
IF I believe there to be no seriously toxic contaminants I shall fractionally distill the mystery liquid, the boiling points wil give more data.
So,
what should I do next, especially what contaminants should I look for ?
[Edited on 8-5-2017 by Sulaiman]
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
JJay
International Hazard
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
That's about right for kerosene, especially if it has been sitting around a long time and some of the more volatile components evaporated. It could
also be jet fuel, a light diesel, or even bad gasoline that has been sitting around a long time.
|
|
Praxichys
International Hazard
Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline
Mood: Coprecipitated
|
|
I second that opinion. That looks exactly like diesel fuel but only because our "non-highway-use" kerosene and heating oil is dyed pink. It could be
either one.
If you distill it, you'll probably get some waxy residues as self-condensation products because it has been sitting so long. It won't have a really
defined BP; you'll get a range instead. IIRC the density of diesel is ~0.83 and kerosene is ~0.81 which is pretty close to your reading.
|
|
Sulaiman
International Hazard
Posts: 3721
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
That sounds logical,
Wednesday is forecast to be a nice day, maybe I'll be able to do a distillation.
Thanks.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
phlogiston
International Hazard
Posts: 1379
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
Why would anybody dump 25 liters of good diesel into your neighbours yard, though?
I wander if the previous owner used it to extract an illegal substance. Diesel is occasionally used, for instance, to extract certain alkaloids.
There likely remains a small amount of that substance dissolved in it.
If you were interested in it, you could try an extraction with dilute acid, but that may well be illegal wherever you are located and perhaps it is
better not to know and to just burn the stuff for its fuel value.
[Edited on 8-5-2017 by phlogiston]
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer
|
|
Sulaiman
International Hazard
Posts: 3721
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
I chickened out of the distillation,
I decided that I'm not ready for huge (by my standards) volumes of boiling kerosene between 150 °C and 275 °C,
so I am now considering a vacuum/reduced pressure distillation at lower temperatures,
hopefully below the atmospheric pressure autoignition temperature (does it help ?)
I will start with about 250 ml in a 500ml rbf with a short path condenser.
I've not done reduced pressure distillation with other than water based mixtures,
can anyone advise of danger that I may be unaware of please ?
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
Corrosive Joeseph
National Hazard
Posts: 915
Registered: 17-5-2015
Location: The Other Place
Member Is Offline
Mood: Cyclic
|
|
I distilled petrol, a few times with a vacuum and a few times with none...........
I sealed up the system, except when I wasn't using vacuum I ran a LONG orange bottle gas hose off the vacuum adapter, out the window (yes, I did it in
the house........ ) and took the other end FAR away from the me, the house
and any source of spark or ignition.
You could even leave the last half inch of the hose in a bucket of water, any slight pressure should pop out a bubble at a time while keeping the end
of the hose actually sealed from the atmosphere. But I do live in a remote rural location...........
My recieving flask sat in a jug of ice water and I gave the condenser the coldest water I could, in some kind of attempt to condense all the vapours I
could.
Worked a treat and the thermometer gave me real vapour temp readings..........
Petrol is easier to light off at equivalent temperatures.............. Kerosene has more BTUs, when it does go bang there is a bigger one..........!!!
It was without a doubt my most exciting distillation to date........... Apart from EtOH, it was also my first one
/CJ
[EDIT] - PS, I was doing 650ml batch in a one litre flask with a home made SS scrubber column and a 500ml SS condensing tube.................
[Edited on 31-5-2017 by Corrosive Joeseph]
[Edited on 31-5-2017 by Corrosive Joeseph]
Being well adjusted to a sick society is no measure of one's mental health
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
I think your plan is OK. But you really don't know what's in that liquid so that is a risk. I presume you are doing this mostly out of curiosity.
Some thoughts:
1. Doing a vacuum distillation adds its own special risk, i.e., implosion.
2. Flammable solvents are not a problem as long as oxygen is rigorously excluded. I've distilled several including ether. Keep air out and provide
good ventilation.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
RogueRose
International Hazard
Posts: 1595
Registered: 16-6-2014
Member Is Offline
|
|
I'm guessing it is E85 of biodiesel - I have both that look identical to that and they both often come in 20 or 25L drums - or it could be someone's
own attempt at one of these fuels.?
|
|
battoussai114
Hazard to Others
Posts: 235
Registered: 18-2-2015
Member Is Offline
Mood: Not bad.... Not bad.
|
|
Since you have a lot of it you could try some chemical tests to narrow on what kind of liquid it is. Search for double bonds, oxygenated functional
groups and stuff like that on a test tube scale before trying to distill it.
Batoussai.
|
|
Sulaiman
International Hazard
Posts: 3721
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
battoussai114
Good suggestion, thanks.
Potassium permanganate is rapidly reduced by this mystery liquid from purple to brown,
so there must be a lot of double bonds as the liquid is able to reduce quite a quantity of KMnO4
I neither basified or acidified the KMnO4
I'm not keen on permangenometry so I will try to determine the iodine value of this liquid later today, just out of curiosity.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
Zephyr
Hazard to Others
Posts: 341
Registered: 30-8-2013
Location: Seattle, WA
Member Is Offline
|
|
Very nice Patch you've got there! And interesting mystery as well. . .
You mentioned it didn't burn on concrete, will it only burn when a flame is held to it?
The sooty flame confirms your unsaturated hydrocarbon idea, I wonder if it could be styrene?
The yellow could be contaminants as others have guessed or it could be picric acid or hydroquinone used to stabilize the styrene.
If you don't want to distill you could try putting a test tube with a small amount of the liquid in boiling water in a well ventilated area and see
how quickly, and if it evaporates to give a rough idea of its boiling point.
Also, it seems odd that the barrel doesn't have any markings on it...
[Edited on 6-2-2017 by Zephyr ]
|
|
Melgar
Anti-Spam Agent
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
It's probably old, partially-contaminated diesel fuel that was in some old man's garage for over a decade, then he died, and his kids had no idea what
it was so they tossed it in your neighbor's yard so it was their problem now.
The reason it won't burn on concrete is probably just because diesel fuel isn't very volatile. You can put out a lit match by dipping it in diesel
fuel, for instance.
|
|
Corrosive Joeseph
National Hazard
Posts: 915
Registered: 17-5-2015
Location: The Other Place
Member Is Offline
Mood: Cyclic
|
|
Possibly somebody was making space for something else in the boot (or trunk for our american friends) and drove off without it...........
Or maybe some rogue (insert whatever expletive you like here) was stealing it out of a vehicle/tank one night and dumped it in a panic.........
Who knows how these mystery liquids fall out of the sky
/CJ
Being well adjusted to a sick society is no measure of one's mental health
|
|
unionised
International Hazard
Posts: 5128
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Don't forget that kerosene (and similar) are used as solvents for pesticides.
If it's full of DDT this would show it up.
https://en.wikipedia.org/wiki/Beilstein_test
|
|