Pages:
1
..
43
44
45
46
47
48 |
woelen
Super Administrator
Posts: 7990
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Your anode is a bad anode, probably not meant to be used in concentrated solutions. Swimming pool anodes are used in very very dilute solutions. They
probably wear out in such solutions as well, but because of the very low rate, they last for a long time when used as swimming pool chlorinator. In
your situation, you are using the anode in a much more concentrated solution and they wear out at a 100 or so times as high rate as in a swimming
pool.
My MMO anodes have been used for many days in concentrated brine at 5 V and I did not even see a tiny little speck of degradation and the liquid
remained clear as water, no flocculent stuff nor junk floating on the surface. With bromide I had degradation, but not of the MMO, but of the titanium
substrate.
|
|
papaya
National Hazard
Posts: 615
Registered: 4-4-2013
Member Is Offline
Mood: reactive
|
|
Thanks woelen, never thought there are different kind of MMOs, especially when it was stated as "Ruthenium/iridium oxide coating", very interesting.
|
|
Fulmen
International Hazard
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
So how do one pick a suitable one?
|
|
papaya
National Hazard
Posts: 615
Registered: 4-4-2013
Member Is Offline
Mood: reactive
|
|
Some interesting news regarding my "bad" anode I thought I have to share with you. As I already said the problem was the anode seemingly being
destructed during NaCL electrolysis even at low current densities - after some time I evidenced brown junk floating on top of liquid and other white
stuff in the volume, several attempts -all with the same outcome.
But before discarding the anode as a "junk" one I decided to test if changing NaCl "brand" may help since we cannot be completely sure on table
salt's real composition! Guess what ? I bought salt from other supplier - the cheapest brand of almost technical quality, even containing some earth
as it occurred (it's just halite mineral ground down without purification). This time NO brown junk during electrolysis - almost clear solution, and
only after 12 hours I discovered some little amount of white stuff floating in the volume. I'm still thinking what this could be - maybe some calcium
or magnesium salts turning into insoluble hydroxides?
Can anyone tell me how to purify NaCL for further tests ? Recrystallization may not work since temperature dependance of NaCl solubility is weak, is
there any other option?
Hell, table salt I used previously might contain some additives at ppm levels (perhaps iodine and ferrocyanide), how this could affect results so
much?
|
|
Hawkguy
Hazard to Others
Posts: 326
Registered: 10-10-2014
Location: British Columbia (Canada eh!)
Member Is Offline
Mood: Body is Ready
|
|
Platinum anodes will tarnish and degrade in extremely alkaline solutions. Better use an MMO anode.
|
|
papaya
National Hazard
Posts: 615
Registered: 4-4-2013
Member Is Offline
Mood: reactive
|
|
That is about MMO!
|
|
Hawkguy
Hazard to Others
Posts: 326
Registered: 10-10-2014
Location: British Columbia (Canada eh!)
Member Is Offline
Mood: Body is Ready
|
|
To purify NaCl just recrystallize it, filtering off insolubles while the NaCl is in solution. You could also try washing it with solvents I guess..
|
|
papaya
National Hazard
Posts: 615
Registered: 4-4-2013
Member Is Offline
Mood: reactive
|
|
How do I recrystallize if solubility doesn't change with temperature? Really folks, how to purify NaCl?
|
|
Varmint
Hazard to Others
Posts: 264
Registered: 30-5-2013
Location: Near Atlanta, GA
Member Is Offline
Mood: No Mood
|
|
"Table salt" is probably not the best choice. First, while safe, it is not pure BY DESIGN, it has iodide, and more importantly (in terms of mass of
offending product) anti-caking agents.
Your best bet is water softener salt, and if your ultimate goal is potassium chlorate or perchlorate, just bite the bullet and start with the
potassium chloride.
I'll be the first to acknowledge how nifty it is to keep the NaCl concentration up, knowing the liquor is slowly being saturated by the much more
soluable chlorate, but once you've done the "double-decomp" and see the KClO3 falling out of solution, it's pretty much all you need to see,
especially when you consider you had to buy the KCl anyway.
|
|
papaya
National Hazard
Posts: 615
Registered: 4-4-2013
Member Is Offline
Mood: reactive
|
|
Varmint, I don't want to perform chlorate synthesis, I'm just testing "suspicious" MMO anode I was given. Suspicious due to the problems I described,
one of which(brown junk) is solved now. Now I suspect "hard" cations in water/salt, thus I ask for a method of purification.
|
|
Fulmen
International Hazard
Posts: 1702
Registered: 24-9-2005
Member Is Offline
Mood: Bored
|
|
Good question. A wash would remove any readily soluble compounds from the surface, that could be enough to get rid of caking agents. As for
recrystallizing I suspect the only practical route would be to dissolve it and boil it down again. Or can one utilize a mixed solvent system?
|
|
Varmint
Hazard to Others
Posts: 264
Registered: 30-5-2013
Location: Near Atlanta, GA
Member Is Offline
Mood: No Mood
|
|
The reason for my comment was, I have MMO from the same supplier, and there are no such unexpected results in my cells.
My cathodes are Titanium grade 2 (chemically pure), the anodes are attached to similarly pure titanium rods through a special process I developed
myself.
I've run moderate current density, and I've cranked the current up to expected point of failure and never saw anything but what I would call "perfect
operation".
If you have MMO, you either plan to make chlorates, or, if you use a salt bridge or expensive commercial membrane, hydroxides and hypochlorites.
If you bought it "to test it", it is your test that needs work, not the quite excellent anodes.
|
|
papaya
National Hazard
Posts: 615
Registered: 4-4-2013
Member Is Offline
Mood: reactive
|
|
I don't remember where I mentioned seller's name, whom you defend so much Varmint? And please don't start giving me "advices" what I should do with
anode and what I shouldn't, since the test I described is far from being damaging to this type of anodes and the results are "no more than
catastrophe" so far. Of course I could openly blame the seller for the shit he sells sometimes (maybe depending who is the buyer and from where, ah?)
as well as not answering the messages I sent him, but I don't do that unless I can be 100% sure. So why are you 100% sure anodes are "quite excellent"
?
|
|
Varmint
Hazard to Others
Posts: 264
Registered: 30-5-2013
Location: Near Atlanta, GA
Member Is Offline
Mood: No Mood
|
|
I'm not defending Laser so much as pointing out what a moron you are for using tap water and table salt to "test" MMO anodes you bought to make
chlorates.
Clear enough?
And I'm quite sure the anodes are excellent because used in a scientifically competent manner, they work as designed without the slightest deviation
from expectation.
|
|
papaya
National Hazard
Posts: 615
Registered: 4-4-2013
Member Is Offline
Mood: reactive
|
|
Now explain me in a scientifically competent manner how did you purify NaCl to get super results, since I don't remember anybody writing here they
used analytical grade and deionized water to avoid some strange flocculent precipitate (which I'm afraid is TiO2). That was my original question,
which you are now trying to turn into flame! moron? that's how you are treated by everybody maybe, unless you get more respectful to other people.
|
|
Varmint
Hazard to Others
Posts: 264
Registered: 30-5-2013
Location: Near Atlanta, GA
Member Is Offline
Mood: No Mood
|
|
I'll remind you to look at my original post, to which you replied "an anode I was given", yet earlier you indicated you obtained it from "the well
known seller" (who's name happens to appear on multiple pages here).
So, you bought it, didn't have a clue how to perform even a basic test, and are now claiming to be researching this probably sub-standard anode.
Hint: Do not change your story mid-stream as a means of preserving your integrity.
Then you amped up your response to include me not giving you advices, his anodes being shit, meanwhile there are lots of buyers here that are quietly
churning out all manner of chlorates, hydroxides, and hypochlorites because, once again, the anodes work well when put to use by those qualified to
understand how they work and how best to put them in service.
You try to pass yourself off as a qualified chemist, yet you used tap water and table salt? Have you never seen how much gunk is in potable water
that has no place in a scientific procedure? Especially one where you pretend to be characterizing performance? You claim your original question was
how to purify? Look back to your first post in this thread, then apologize for trying to lie to me.
You shouldn't have posted in a thoughts about anodes thread, you should have opened one of your own, in beginings, stating "I bought an anode, now
what?"
|
|
papaya
National Hazard
Posts: 615
Registered: 4-4-2013
Member Is Offline
Mood: reactive
|
|
What? You imply I'm hiding something because I said "given" instead of "bought" this time? If I had to hide something would I ever post here about
issue? listen, I'm getting tired of this pointless dialogue with you honestly and don't see what are you try to prove. I told the story as it happened
(and as it progressed later) and finally asked for a method of purification of NaCl, since only then I can make any conclusion! Yes I used tap water
as many others did with NO problems, isn't it? What is the meaning of using distilled water if you have to use technical/table salt?
Or was it supposed that I will act like many clueless people, who bought anodes and just hurrily put it into 100amp chlorate cells directly with
KCl,so nobody sees strange precipitate mixed with tons of chlorate? I invested into anode mostly because it's a valuable and not so easy to get thing
where I live and for broad purposes ,future experimentation, for chlorates I made my own cobalt oxide anodes one time btw and got tired of
"chlorates"(as you continually retiterate) already back in the past. Why is it "suspicious" when one tries to look more thoroughly into a thing for
which he paid, especially if there're reason to be worried?
Anyway, I don't like this kind of dialogue, If anybody wants to add on the subject only then I'll answer, this is lost of a time.
|
|
violet sin
International Hazard
Posts: 1477
Registered: 2-9-2012
Location: Daydreaming of uraninite...
Member Is Offline
Mood: Good
|
|
hey there guys,... I'll just cut in here for a sec, I bought laser's MMO as well. in addition to the couple I spot welded( shown bottom page 44 this
thread) I made a larger single plate cathode from Ebay sheet stock, gr2 Ti, in order to have a larger surface area. dremel action to liberate it from
a larger sheet. looked great, all shiny, polished and blunted edges,. for about 2 nights... ya I know, so what a cathode, boring, well..
I had been making bleaching solution for cleaning up, not chlorate,.. I have a pool that I hate getting green. it was measured by occasionally
stirring and placing one drop on a cut paper towel tube. brown, free and convenient; showed the bleaching action very well. any how I was using
both morton iodized and solar salt( softner), in a small jam jar as an initial test of the spot welds I had made in open air with out any flux. they
were fine and lasted 5+ days, on while I was home, with out so much as a blemish. the solutions were clear but became strong yellow, with out ever
turning cloudy. when I scaled up with the new shiny hand made one. we had an empty gallon wine jug and I wanted to make bleach/bleaching solution in
it. after working everything out in one evening, I was in a rush to get sleep before too late... and wired them electrodes backwards! plugged it it,
set it to 5V 1.5A awoke in the morning to a wonderful mess. the gallon wine jug was half full of a white voluminous chunky stuff that shifted to a
more brick red and much thicker foam at the top of the jug. I was horrified and immediately figured what I had done. called my self a dork and went
to work bummed.
later on inspection the MMO was covered in red/orange/white foamy crap and the (intended)cathode plate had been cut down by more than a third.
albeit, the erosion looked interesting( bright side of things right?) the surface was still shiny were it wasn't eaten, all the revealed metal was
black colored. I had assumed both were trash. but after a cleaning and changing purpose,the MMO is a nice dark black with shiny cut edges. no
damage. I had been using it as counter electrode to plate copper out of E-waste I have, onto copper tube and sheet. I swear the thing is bullet
proof, for a lill MMO strip I spot welded my self.
I have had the thing running with e-waste( HCl + cellphone and computer boards), sulfamic acidified e-waste, sulfamic + cupronickel, strong presence
of HCl, sea salt, Iodized table salt, and countless hitch hikers from the trace resists/enamels/solders/inks/wide array of metal salts in sol. not
all at one time, but many of the parameters overlapped in at least a few experiments. its still running like a champ.
the small scale tests with the e-waste, was attempting systematic depletion of specific metals in sol. none has ever been dumped and I am getting
tired of saving batches to deal with. boil down( out side and slowly, neutralize, drop in aluminum scrap and store the cake. things looked good,
copper was plating out easily and made some impressive yet feathery( brittle) crystals. A touch of citric acid and sulfamic seems to smooth the
process a bit. I only noticed a darkening of the crystals once, but it was oxidation as far as I could tell, nothing else was plating with it at
least. when I changed from the portable electrolysis device I had made, to an ebay bench top power supply, I accidentally switched the polarity and
partially copper plated the MMO, then switched back and stripped it off. no harm yet again.
some of this could easily be considered just dicking around, and it was other than the first hand learning and subsequent reading, notes and what not.
regardless, the MMO is far more resilient than I would have thought.
|
|
Varmint
Hazard to Others
Posts: 264
Registered: 30-5-2013
Location: Near Atlanta, GA
Member Is Offline
Mood: No Mood
|
|
papaya:
Thanks for finally coming clean and getting your story straight or straighter, I'm sure you had to go back and read what you wrote to get it "right"
this time. Too bad you weren't man enough to apologize though.
See, I can amp up the "ass" with the best of them, and if you had shown even a hint of respect along the way, you would have found I can amp up the
"good guy" with the best of them too.
My advice for you is to back up a bit, think before you post, and try, as hard as it might seem at first, try not pass yourself off as a research
chemist, especially when peoples posts based on the evolving truth directed you to ask such an elementary question as how to purify a salt.
Have a great day bud.
|
|
mysteriusbhoice
Hazard to Others
Posts: 477
Registered: 27-1-2016
Member Is Offline
Mood: Became chemistry catboy Vtuber Nyaa
|
|
I am new to chlorate synthesis using mmo and i have read that tap water is bad for your anodes but the place where i live in has tap water from
desalination plants with almost no fluoride content and so far i do not see any erosion and the solution remains clear after 2 weeks and 2 runs also
the anode is still rough and not deep black and smooth.
But i heard that iron and barium is really bad for them only time will tell if i had made a huge mistake.
I couldn't find any bottled water brands that are any safer and spending on an RO DI system just for this.
|
|
Detonationology
Hazard to Others
Posts: 362
Registered: 5-5-2015
Location: Deep South
Member Is Offline
Mood: Electrophillic
|
|
Quote: Originally posted by mysteriusbhoice | so far i do not see any erosion and the solution remains clear after 2 weeks and 2 runs also the anode is still rough and not deep black and smooth.
|
How much power are you using?
“There are no differences but differences of degree between different degrees of difference and no difference.” ― William James
|
|
yobbo II
National Hazard
Posts: 728
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
Has anyone ever suggested using Pt leaf wrapped onto a titanium rod for an anode.
Pt leaf is available here
http://www.goldleafsupplies.co.uk/acatalog/Platinum_Loose_Le...
Platinum is 21.45g/cm^3
1000 sheets of 8 by 8 cm weighs 32 grams. I make the thickness of the sheets 2.33 micron. Too thin I would imagine.
|
|
halogen
Hazard to Others
Posts: 372
Registered: 18-4-2004
Member Is Offline
Mood: No Mood
|
|
https://books.google.com/books?id=x-oOAAAAYAAJ&pg=PA71&a...
Chromium phosphide was "not seriously attacked" by chlorine gas evolved upon it when used as a material for an anode. Not sure about the specific
conditions in a chlorine cell (pH?) as opposed to the one from which this observation was made -- which might be unreliable as it was made in 1892.
"When, in 1892, columbus sailed the skies blue" as they say.
[Edited on 29-11-2016 by halogen]
F. de Lalande and M. Prud'homme showed that a mixture of boric oxide and sodium chloride is decomposed in a stream of dry air or oxygen at a red heat
with the evolution of chlorine.
|
|
yobbo II
National Hazard
Posts: 728
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
Glassy carbon rods are available here
http://onyxmet.com/index.php?route=product/search&filter...
Cheap is anyone want to have a go...
The yob
|
|
yobbo II
National Hazard
Posts: 728
Registered: 28-3-2016
Member Is Offline
Mood: No Mood
|
|
Bi-Electrode from Platinum and Titanium
Running a platinum anode for some time now making chlorate and perchlorate. It's best to just make perchlorate only as the anode is very small and
slow to make chlorate. It makes 150 grams sodium perchlorate per day from sodium chlorate at three amps and is made from a flattened Pt one gram pamp
suisse bullion bar 'nipped' between two pieces of Titanium (like a pair of pincers).
There is a similar set up in the paper attached.
More details to follow.
Yob
Attachment: PrBiElectrode1.pdf (233kB) This file has been downloaded 601 times
[Edited on 5-2-2018 by yobbo II]
|
|
Pages:
1
..
43
44
45
46
47
48 |