Pages:
1
2 |
Phosphor-ing
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 245
Registered: 31-5-2006
Location: Deep South, USA
Member Is Offline
Mood: Inquisitive
|
|
3A molecular sieves are the way to go dehydrating ethanol. Not very fast but really cheap considering they can be regenerated hundreds or thousands of
times.
"The nine most terrifying words in the English language are: 'I'm from the government and I'm here to help.'" -Ronald Reagan
|
|
NedsHead
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 409
Registered: 9-12-2014
Location: South Australia
Member Is Offline
Mood: No Mood
|
|
Distilled water, that stuff is pricey but easy to make
|
|
LD5050
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 182
Registered: 16-1-2017
Member Is Offline
Mood: No Mood
|
|
Distilled water is pricey? last time I checked it was like 70 cents a gallon
Not sure if it was mentioned yet but benzaldehyde it hard to come by (depending on where you live) yet there is like 5000000 different ways of making
it and a lot are quite easy.
[Edited on 4-3-2017 by LD5050]
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Lactic acid? We make it just by running, but it's stupidly expensive. Also, pyruvic acid. Not sure why those two are so expensive, since they can be
made without much difficulty via the oxidation of propylene glycol.
|
|
anewsoul
Harmless
Posts: 32
Registered: 26-1-2017
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Melgar ![](images/xpblue/lastpost.gif) | Lactic acid? We make it just by running, but it's stupidly expensive. Also, pyruvic acid. Not sure why those two are so expensive, since they can be
made without much difficulty via the oxidation of propylene glycol. |
Lol. How might you extract the lactic acid produced in the body?
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
With your liver, of course.
|
|
symboom
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1143
Registered: 11-11-2010
Location: Wrongplanet
Member Is Offline
Mood: Doing science while it is still legal since 2010
|
|
Compounds in milk
And extracting this is not my video
He extracts compounds from milk including lactose
https://m.youtube.com/watch?v=BV8aFRII1M4
Also
Racemic lactic acid is produced in industry by addition of hydrogen cyanide to acetaldehyde and subsequent hydrolysis of forming lactonitrile.
Hydrolysis performed by hydrochloric acid and ammonium chloride forms as a by-product of lactic acid. Excerpt wikipedia lactic acid
[Edited on 4-4-2017 by symboom]
|
|
Melgar
Anti-Spam Agent
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Quote: Originally posted by symboom ![](images/xpblue/lastpost.gif) | Compounds in milk
And extracting this is not my video
He extracts compounds from milk including lactose
https://m.youtube.com/watch?v=BV8aFRII1M4
Also
Racemic lactic acid is produced in industry by addition of hydrogen cyanide to acetaldehyde and subsequent hydrolysis of forming lactonitrile.
Hydrolysis performed by hydrochloric acid and ammonium chloride forms as a by-product of lactic acid. Excerpt wikipedia lactic acid
|
If you kept reading, you might have noticed that only one company in Japan still makes it this way, and others all start with cheaper precursors like
glycerol and propylene. However, lactic acid is a chiral molecule, which could make it harder to synthesize. And I doubt there's that much demand for
it either.
|
|
Fantasma4500
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1681
Registered: 12-12-2012
Location: Dysrope (aka europe)
Member Is Offline
Mood: dangerously practical
|
|
ive seen styrene sold towards 100 dollars for half a litre, metal plastic or something, stabilized with 1% methanol, supposedly polymerizes into
polystyrene when left out in air
this stuff can be made from pyrolysis of polystyrene, which can then be oxidized into benzaldehyde
one could go about making formate salts by tossing carbon monoxide, possibly from NaHCO3 electrolysis cell through calcium hydroxide, it then forms
calcium formate
some very hefty solvents springs to mind, SCl2
one guy claimed to having been able to run a very neat manufacturing of oleum, 185% H2SO4, using sulfur, air and a catalyst, as well as drying agent
for air (again sulfuric acid), cant remember what oleum cost last time i even had a chance to see price of such, but extremely expensive
colloidal silver through silver oxalate decomposition controlled in water and / or glycol mixture
guanidine carbonate! or well guanidine salts in general, recall AN and UNitrate heated together for some hours would create a bunch of guanidine
nitrate
chloroacetates, simply chlorination of acetic acid
cyanides
acetaldehyde, mostly because its pretty difficult to get around? a bonus is that one can combine different things with the reaction vessel that then
further reacts with aldehydes, amines and what not
chromate and dichromate from stainless steel - HCl + Me(tal) = MeClx -> MeClx + NaHCO3 = MeCO3/OHx -> Cr(OH)3 + NaClO = NaCrO4 -> NaCrO4 +
HCl = Na2Cr2O7, excess HCl forms chlorochromate which has some potential use as oxidizer for organics, also serves as a neat little continous chlorine
generator for whenever you feel like pouring out a bit of chlorine on burning steel wool or what not
oxalic acid from sugar and nitric acid
nitric acid
methanol distilled from wood
got a hint laying about saying butyl alcohol oxidation turns into methyl ethyl ketone?
"ketene lamp" (sort of build technical of what i understand, you want high temperature, high resistance kiln wire, can produce acetic anhydride i
think?)
piperine, but very high risk reaction using sodium metal, cant recall procedure but its quite expensive stuff
ethyl chloride from Cl2 + ethanol
phenol from decomposition of salicylic acid, it can be tossed a bit back and forth in aromatic solvents with some patience
fine zinc metal powder from sodium zincate electrolysis
oxalic acid and glycol forming allyl alcohol (was it allyl?)
bunch of these things are either watched or barely possible to buy, others i wrote down simply for how useful they are
|
|
Booze
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 121
Registered: 26-2-2017
Member Is Offline
Mood: No Mood
|
|
Hey, I don't think iodine should be in the list up there. You can buy 10 grams for 20-40 dollars on ebay, but making some from tincture (are there
other sources?) costs 10-15 dollars a bottle, and has about 1-2 grams.
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
Chromate and dichromate from stainless steel is not particularly cost effective. Assuming 100% yield, I can actually buy chromates for slightly
cheaper than I can make them, and when I make them, the yields aren't 100%. Of course, there is an extremely wide range of prices for [di]chromates...
they are typically sold to chemists at exorbitant prices. But they are also used extensively for industrial purposes, so if you shop around, you can
find technical grades at low cost. That's good enough for almost all purposes. And of course, you can also purify them yourself if you want some
expensive grade stuff....
|
|
Cryolite.
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 269
Registered: 28-6-2016
Location: CA
Member Is Offline
Mood: No Mood
|
|
How about benzene? Nigh impossible to get outside of chemical suppliers, but easy enough to make from benzoic acid if you have the patience.
|
|
PirateDocBrown
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 570
Registered: 27-11-2016
Location: Minnesota
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Booze ![](images/xpblue/lastpost.gif) | Hey, I don't think iodine should be in the list up there. You can buy 10 grams for 20-40 dollars on ebay, but making some from tincture (are there
other sources?) costs 10-15 dollars a bottle, and has about 1-2 grams. |
LOL! 100 bucks for a kg (!) os KI or NaI + drugstore H2O2 + hardware store HCl = All the I2 you want.
|
|
Booze
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 121
Registered: 26-2-2017
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by PirateDocBrown ![](images/xpblue/lastpost.gif) | Quote: Originally posted by Booze ![](images/xpblue/lastpost.gif) | Hey, I don't think iodine should be in the list up there. You can buy 10 grams for 20-40 dollars on ebay, but making some from tincture (are there
other sources?) costs 10-15 dollars a bottle, and has about 1-2 grams. |
LOL! 100 bucks for a kg (!) os KI or NaI + drugstore H2O2 + hardware store HCl = All the I2 you want. |
100 bucks for a kg of potassium iodide? Pass, i'll buy some pure iodine on ebay. Besides, who needs a kilogram?
[Edited on 9-4-2017 by Booze]
|
|
PirateDocBrown
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 570
Registered: 27-11-2016
Location: Minnesota
Member Is Offline
Mood: No Mood
|
|
There's probably no easier chemical than iodine to purify.
|
|
hyfalcon
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1003
Registered: 29-3-2012
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Melgar ![](images/xpblue/lastpost.gif) |
Hey, why'd you quote me as saying that? I have plenty of crucibles, and can get them from the jewelry supply store in many different shapes and
sizes. But then, I can get potassium cyanide for $20 / lb OTC there too, so that may not be a good comparison.
@altking: that's where desiccants are your friend. You just need to find one that's inert to ethanol but sucks up any water that comes near it. You
tend to need to leave it overnight though. I've heard that potassium carbonate works well for this, but that's kind of expensive and reacts easily
with anything acidic. Silica gel would probably be a good bet though.
[Edited on 4/3/17 by Melgar] |
Better off using 3A molecular sieves.
|
|
bluamine
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 197
Registered: 17-8-2015
Member Is Offline
Mood: No Mood
|
|
Extracting Sodium needs at least molten sodium hydroxide! (which is obtained at temp above 400°C) or molten NaCl (above 800°C). Na & K can not
easily be obtained.
I still don't have acces to any bromide compunds, so i'm planning to extract it from sea water later.
|
|
Mesa
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 264
Registered: 2-7-2013
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by bluamine ![](images/xpblue/lastpost.gif) | Extracting Sodium needs at least molten sodium hydroxide! (which is obtained at temp above 400°C) or molten NaCl (above 800°C). Na & K can not
easily be obtained.
I still don't have acces to any bromide compunds, so i'm planning to extract it from sea water later. |
Only half true. Yes, sodium is pretty difficult to prepare in a home setting.
Potassium on the other hand, is much more easily prepared via this:
http://www.sciencemadness.org/talk/viewthread.php?tid=14970
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1640
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
Um that's how you make chlorohydrate
|
|
Booze
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 121
Registered: 26-2-2017
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by bluamine ![](images/xpblue/lastpost.gif) | Extracting Sodium needs at least molten sodium hydroxide! (which is obtained at temp above 400°C) or molten NaCl (above 800°C). Na & K can not
easily be obtained.
I still don't have acces to any bromide compunds, so i'm planning to extract it from sea water later. |
I made sodium metal once. I used sodium hydroxide and magnesium powder and lit the magnesium. After that I added the mess to a beaker with water and a
layer of mineral oil over the water. The sodium stayed in the oil mixture as the magnesium hydroxide sank to the bottom.
It was kinda easy, but then I melted the sodium into a nice blob.
|
|
The Volatile Chemist
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1981
Registered: 22-3-2014
Location: 'Stil' in the lab...
Member Is Offline
Mood: Copious
|
|
Lol found this funny - perhaps because I use the same tone to correct people about chemistry in general...
I can't recall if Chromyl Chloride was up there, or Dioxane, but doug's lab makes those synths look pretty easy. Not that either are exra-ordinarily
useful.
Nathan
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
There are safer reagents for this purpose, but chromyl chloride can be used to oxidize primary alcohols to aldehydes. It's rather dangerous stuff, but
at least the boiling point isn't terribly low.
Dioxane actually looks tremendously useful... I'm not sure why it isn't more popular.
|
|
Cryolite.
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 269
Registered: 28-6-2016
Location: CA
Member Is Offline
Mood: No Mood
|
|
Carcinogenic, low yield when synthesizing from ethylene glycol and sulfuric acid, difficult to dry and purify, forms peroxides on storage...
[Edited on 12-4-2017 by Cryolite.]
|
|
bluamine
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 197
Registered: 17-8-2015
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Booze ![](images/xpblue/lastpost.gif) |
I made sodium metal once. I used sodium hydroxide and magnesium powder and lit the magnesium. After that I added the mess to a beaker with water and a
layer of mineral oil over the water. The sodium stayed in the oil mixture as the magnesium hydroxide sank to the bottom.
It was kinda easy, but then I melted the sodium into a nice blob. |
I've already seen at least one video about this method, but i just forgot to mention it. Anyway, i don't have any Mg powder so it's somehow difficult
to make it since i only have MgCl2 & MgSO4
|
|
Pages:
1
2 |