Pages:
1
2
3
4
5
..
20 |
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
500 mL, Deschem.
The quality does not appear to be extremely high in person, but I am sure they are quite functional. There's just enough room to fit small stirbars
underneath the perforated gas outlets.
|
|
j_sum1
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 6256
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
I am now the proud owner of a 500mL soxhlet and condenser. ![:)](./images/smilies/smile.gif)
Bit of a scary moment though. Package was not very secure. Just a cardboard box with a thin foam wrap. I opened carefully and heard the telltale clink
and rattle of broken glass. Turns out everything was intact but there were fragments of glass tubing inside the soxhlet.
It is not very high quality. But I got it for under 20USD so I am not complaining. I bet it makes great coffee.
|
|
CharlieA
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 646
Registered: 11-8-2015
Location: Missouri, USA
Member Is Offline
Mood: No Mood
|
|
What a great buy! May I ask where you purchased it?
|
|
j_sum1
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 6256
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
It was this one
http://www.ebay.com.au/itm/262767471069
But I paid a different price. From memory it was about $27AUD.
There are numerous sellers selling the same one so shop around a bit.
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
I've been thinking about getting one of those. I think elec-mall is the cheapest one willing to ship to me, but lovelyhome2015 has a better
reputation. SacredLotus.com has a huge list of herbs used in traditional Chinese medicine. I bet it's possible to do some interesting chemistry with
some of them.
|
|
j_sum1
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 6256
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
If you catch Nurdrage's latest offering he doubles the yield of a Fischer esterification by swapping the reflux condenser for a soxhlet filled with 3A
molecular sieves. That removes the water that is produced and pushes the equilibrium to the right. So it is not just extractions that they are
useful for.
I figured that at that price it was a good addition to my glassware collection. It might not be used that often but handy to have around.
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4547
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Haha, why was this picture necessary:
![Screen Shot 2017-02-03 at 8.53.51 AM.png - 929kB](https://www.sciencemadness.org/whisper/files.php?pid=473591&aid=56654)
"Here's what it looks like if you decide to assemble it upside down for some reason!"
|
|
aga
Forum Drunkard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Lol.
Go on ! Do the third option !
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
This is not technically glassware... but I got some tubing and a stirrer today. It is only a one-speed stirrer (although I suspect I can use a
controller to change that), but it was dirt cheap, and unlike my other stirrer, it is in good working order.
![IMG_20170203_152258.jpg - 383kB](https://www.sciencemadness.org/whisper/files.php?pid=473637&aid=56660)
[Edited on 4-2-2017 by JJay]
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
Quote: Originally posted by j_sum1 ![](images/xpblue/lastpost.gif) | If you catch Nurdrage's latest offering he doubles the yield of a Fischer esterification by swapping the reflux condenser for a soxhlet filled with 3A
molecular sieves. That removes the water that is produced and pushes the equilibrium to the right. So it is not just extractions that they are
useful for.
I figured that at that price it was a good addition to my glassware collection. It might not be used that often but handy to have around.
|
That is a super cool idea. I think they are used a lot in natural products research but have limited application elsewhere... still, I definitely want
one.
|
|
Fidelmios
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 104
Registered: 28-4-2016
Location: Witty Chemistry Joke
Member Is Offline
Mood: No Mood
|
|
I recently got a new 1L beaker, 500mL beaker, and a basic distillation kit. I'm a happy camper!
|
|
Chlorine
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 56
Registered: 26-11-2016
Location: Maine, USA
Member Is Offline
Mood: Brominated
|
|
1. Just bought another electric camping hot plate (much cheaper then buying a chem designed one).
2. Beaker set 1000ml, 500ml 2: 250ml & 4: 100ml
3. Small morter and pestle
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
New mercury thermometer.
I am waiting on some thermometer wells so I can hopefully start using a thermocouple instead.
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3631
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Quote: Originally posted by JJay ![](images/xpblue/lastpost.gif) | This is not technically glassware... but I got some tubing and a stirrer today. It is only a one-speed stirrer (although I suspect I can use a
controller to change that), but it was dirt cheap, and unlike my other stirrer, it is in good working order. |
the tubing looks like the cheap latex tubing that comes with eBay Chinese kits
if it is, it's awful stuff;
too little water pressure and it collapses/kinks
a little more pressure and the tubing balloons !
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
It's very similar to that tubing but doesn't seem to collapse or kink as easily. I usually like to use PVC, but I needed something that would
accommodate multiple hose barb sizes. While this tubing was expensive, I didn't see anything else that would work in my apparatus.
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
New thermometer and thermometer well.
|
|
NeonPulse
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 417
Registered: 29-6-2013
Location: The other end of the internet.
Member Is Offline
Mood: Isolated from Reality! For Real this time....
|
|
Got a couple more things to add to the Collection- a 300mm air condenser, A 300mm fractioning column and a 300ml porcelain crucible. Also had 300g of
3A molecular sieves arrive yesterday. Seems like 300 is the going trend lately.
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
I'd like to have a 300mL porcelain crucible. My crucible is so tiny....
|
|
anewsoul
Harmless
Posts: 32
Registered: 26-1-2017
Member Is Offline
Mood: No Mood
|
|
Where did you get the mercury thermometer?
|
|
Db33
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 206
Registered: 25-11-2016
Member Is Offline
Mood: No Mood
|
|
i hav a question JJay, i have the exact same thermometer well, can i make it work with a thermocouple device?
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
The mercury thermometer? That came from the USA. It was expensive, and they are hard to ship. Several vendors in China sell similar ones for a
fraction of the cost. I have not personally tried buying one of these.
There are several videos on YouTube of people using similar thermometer wells with thermocouples, so I am pretty sure it's possible to get that
thermometer well to work with a thermocouple, but I haven't tried it yet. It has a 182 mm overall length with the thermometer well being perhaps 100
mm. I will say that it is too long for a distillation adapter but is the perfect size for a 500 mL flask. I think it would work well with a 1000 mL
flask and possibly even a 2000 mL flask too, but it is a too small for a 3000 mL flask unless it is more than half full.
|
|
PirateDocBrown
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 570
Registered: 27-11-2016
Location: Minnesota
Member Is Offline
Mood: No Mood
|
|
Just arrived!
1 L flatbottom 2 neck
350 mL #3 frit
thermometer well
all 24 40
Likely my last new ST buy for a while, though I'm always looking for cheap used.
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
I have a new (to me) 14/10 kit. It could use a few more adapters and flasks, and it could definitely stand a good cleaning, but it looks like the
basics are here. I probably shouldn't have this thing so close to my toothbrush....
![IMG_20170210_165915.jpg - 544kB](https://www.sciencemadness.org/whisper/files.php?pid=474344&aid=57004)
I also got this. The quality appears to be excellent.
![14867792590611479285805.jpg - 352kB](https://www.sciencemadness.org/whisper/files.php?pid=474344&aid=57006)
[Edited on 11-2-2017 by JJay]
|
|
j_sum1
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 6256
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
Oddly enough the thing that stands out in your mini kit is the nice spatula. I guess I am not particularly attracted to 14/10 scale.
But that is a nice looking reflux condenser. Something that can cope with a decent heat transfer rate is good to have.
For example...
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
It's a Reacware condenser.
The spatula is all right. I have a slightly larger one that is round on one end and flat on the other. It's had limited exposure to some extremely
corrosive and oxidizing environments and has never shown the slightest trace of rust, though it does have a visible passivating layer that makes it a
little less shiny than its original milled finish, similar to the spatula above. I think they are 316 steel.
|
|
Pages:
1
2
3
4
5
..
20 |